From brad at fineby.me.uk  Fri Jul  1 19:37:13 2016
From: brad at fineby.me.uk (Brad Rogers)
Date: Fri, 1 Jul 2016 18:37:13 +0100
Subject: [Users] Ignore Thread
Message-ID: <20160701183713.08e93e5c@abydos.stargate.org.uk>

Hello,

I'm not sure what I should be seeing WRT to "Ignore Thread", so am
asking here.

What I _expected_ to see:

Highlight first message in thread, select "Ignore Thread" and every
message currently in that thread, and any that are received later will
be 'ignored'.  Obviously, if anybody breaks threading or responds to to
a digest post on the same subject, 'ignored' status won't be applied.

What I _actually_ see:

Highlight first message in thread, select "Ignore Thread" and all
messages in CM are marked 'ignored' but *new* messages in the same thread
are not always marked as ignored, so I have to mark them again.  I
should mention that there are messages in these threads I don't receive
because the authors of those messages are deleted at the server
(killfiled) so I never see them - however, threading is not broken as a
result.

-- 
 Regards  _
         / )           "The blindingly obvious is
        / _)rad        never immediately apparent"
I am alone there's nobody there
I Look Alone - Buzzcocks
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160701/05add695/attachment.sig>

From noreply at thewildbeast.co.uk  Sat Jul  2 11:51:28 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Sat, 02 Jul 2016 09:51:28 +0000
Subject: [Users] [Bug 3655] Gmail IMAP account asks to "Rebuild folder tree"
 on each launch
In-Reply-To: <bug-3655-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3655-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3655-595-3gIwF8ckos@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3655

--- Comment #9 from Paul <paul at claws-mail.org> ---
Looking at the debug output, you have 3 accounts and they all appear to be the
same gmail account. Is that right? If so, remove 2 of them. It may be better to
quit claws-mail and remove 2 account blocks from ~/.claws-mail/accountrc rather
than try to do it in Claws Mail. Backup before trying if in doubt.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From claws at thewildbeast.co.uk  Sat Jul  2 11:55:31 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Sat, 2 Jul 2016 10:55:31 +0100
Subject: [Users] Ignore Thread
In-Reply-To: <20160701183713.08e93e5c@abydos.stargate.org.uk>
References: <20160701183713.08e93e5c@abydos.stargate.org.uk>
Message-ID: <20160702105531.5af87aa3@kujata>

On Fri, 1 Jul 2016 18:37:13 +0100
Brad Rogers <brad at fineby.me.uk> wrote: 

> Highlight first message in thread, select "Ignore Thread" and all
> messages in CM are marked 'ignored' but *new* messages in the same
> thread are not always marked as ignored, so I have to mark them
> again.  I should mention that there are messages in these threads I
> don't receive because the authors of those messages are deleted at
> the server (killfiled) so I never see them - however, threading is
> not broken as a result.

I'm confused over what you are trying to explain. "... all messages
in CM are marked 'ignored'" - do you mean all messages in the marked
thread?

It works correctly here.

Are you using the option 'Thread using subject in addition....'? 

with regards

Paul


From brad at fineby.me.uk  Sat Jul  2 13:00:43 2016
From: brad at fineby.me.uk (Brad Rogers)
Date: Sat, 2 Jul 2016 12:00:43 +0100
Subject: [Users] (Solved) Ignore Thread
In-Reply-To: <20160702105531.5af87aa3@kujata>
References: <20160701183713.08e93e5c@abydos.stargate.org.uk>
 <20160702105531.5af87aa3@kujata>
Message-ID: <20160702120043.1526011d@abydos.stargate.org.uk>

On Sat, 2 Jul 2016 10:55:31 +0100
Paul <claws at thewildbeast.co.uk> wrote:

Hello Paul,

>I'm confused over what you are trying to explain. "... all messages
>in CM are marked 'ignored'" - do you mean all messages in the marked
>thread?

Sorry, yes;  Mark thread as ignored.

>Are you using the option 'Thread using subject in addition....'? 

Yes.

I've also since discovered that at least one person is using an MUA that
breaks threading (no references or in-reply-to headers) so that also is
a contributing factor.  No doubt that's the overriding issue.  I've
marked this message with 'solved' in the subject.

Thanks for your time Paul.

-- 
 Regards  _
         / )           "The blindingly obvious is
        / _)rad        never immediately apparent"
I can't relax 'cause I haven't done a thing
Independence Day - Comsat Angels
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160702/244aa6ec/attachment.sig>

From sylpheed at 911networks.com  Sun Jul  3 22:36:48 2016
From: sylpheed at 911networks.com (sylpheed at 911networks.com)
Date: Sun, 3 Jul 2016 13:36:48 -0700
Subject: [Users] Spell checking
Message-ID: <20160703133648.04f4b903@frogguski.911networks.com>

CM 3.13.2 on archlinux.

I just replaced my system hard drive and reinstalled everything
including CM from the archlinux-extra repository.

spell check give an error when I start any new message. 

Enchant is installed but in Preferences > Spell checking > it shows "he"
for both dictionaries and cannot be changed to en_CA.

What am I missing?

-- 
sknahT

vyS


From silver.bullet at zoho.com  Sun Jul  3 22:44:56 2016
From: silver.bullet at zoho.com (Ralf Mardorf)
Date: Sun, 3 Jul 2016 22:44:56 +0200
Subject: [Users] Spell checking
In-Reply-To: <20160703133648.04f4b903@frogguski.911networks.com>
References: <20160703133648.04f4b903@frogguski.911networks.com>
Message-ID: <20160703224456.038a3a74@utnubu>

On Sun, 3 Jul 2016 13:36:48 -0700, sylpheed at 911networks.com wrote:
>spell check give an error when I start any new message

Perhaps you should quote the error message.



From sylpheed at 911networks.com  Sun Jul  3 22:56:40 2016
From: sylpheed at 911networks.com (sylpheed at 911networks.com)
Date: Sun, 3 Jul 2016 13:56:40 -0700
Subject: [Users] Spell checking
In-Reply-To: <20160703224456.038a3a74@utnubu>
References: <20160703133648.04f4b903@frogguski.911networks.com>
 <20160703224456.038a3a74@utnubu>
Message-ID: <20160703135640.4cd58d56@frogguski.911networks.com>

On Sun, 3 Jul 2016 22:44:56 +0200
Ralf Mardorf <silver.bullet at zoho.com> wrote:

>On Sun, 3 Jul 2016 13:36:48 -0700, sylpheed at 911networks.com wrote:
>>spell check give an error when I start any new message  
>
>Perhaps you should quote the error message.

Oops: Sorry: Here's the print screen:

http://i.imgur.com/8uqyWQ6.png


-- 
sknahT

vyS


From claws at thewildbeast.co.uk  Sun Jul  3 23:31:36 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Sun, 3 Jul 2016 22:31:36 +0100
Subject: [Users] Spell checking
In-Reply-To: <20160703133648.04f4b903@frogguski.911networks.com>
References: <20160703133648.04f4b903@frogguski.911networks.com>
Message-ID: <20160703223136.26cd4885@kujata>

On Sun, 3 Jul 2016 13:36:48 -0700
sylpheed at 911networks.com wrote: 

> What am I missing?

en_CA dictionary, probably.

with regards

Paul


From sylpheed at 911networks.com  Mon Jul  4 02:45:52 2016
From: sylpheed at 911networks.com (sylpheed at 911networks.com)
Date: Sun, 3 Jul 2016 17:45:52 -0700
Subject: [Users] [Solved]: Re:  Spell checking
In-Reply-To: <20160703223136.26cd4885@kujata>
References: <20160703133648.04f4b903@frogguski.911networks.com>
 <20160703223136.26cd4885@kujata>
Message-ID: <20160703174552.18abffed@frogguski.911networks.com>

On Sun, 3 Jul 2016 22:31:36 +0100
Paul <claws at thewildbeast.co.uk> wrote:

>On Sun, 3 Jul 2016 13:36:48 -0700
>sylpheed at 911networks.com wrote: 
>
>> What am I missing?  
>
>en_CA dictionary, probably.

Both enchant and hunspell are installed but I also needed to install:

hunspell-en

Thanks

-- 
sknahT

vyS


From noreply at thewildbeast.co.uk  Mon Jul  4 12:04:04 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 10:04:04 -0000
Subject: [Users] [Bug 3600] make next_on_delete work for Move To Trash
In-Reply-To: <bug-3600-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3600-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3600-595-x2X3IhkMbZ@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3600

--- Comment #5 from users at lists.claws-mail.org ---
Changes related to this bug have been committed.
Please check latest Git and update the bug accordingly.
You can also get the patch from:
http://git.claws-mail.org/

++ ChangeLog    2016-07-04 12:04:02.408325960 +0200
http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=a3711b948d22dff9e3dfab5316cab229e0e5dfd0
Merge: 9842b86 92c1a19
Author: Colin Leroy <colin at colino.net>
Date:   Mon Jul 4 12:04:01 2016 +0200

    Merge branch 'master' of file:///home/git/claws

http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=92c1a195b5543b33d39cd46a0de539e10ee27e57
Author: Paul <paul at claws-mail.org>
Date:   Mon Jul 4 11:02:58 2016 +0100

    make 'next_on_delete' hidden pref apply after trashing or moving a msg in
addition to deleting a msg

    fixes bug #3600.
    document this hidden pref also

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 12:22:50 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 10:22:50 +0000
Subject: [Users] [Bug 3600] make next_on_delete work for Move To Trash
In-Reply-To: <bug-3600-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3600-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3600-595-WGnsstzDqN@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3600

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 12:51:59 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 10:51:59 +0000
Subject: [Users] [Bug 2064] Replying to own emails
In-Reply-To: <bug-2064-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2064-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2064-595-6IROgV90AR@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2064

--- Comment #1 from Paul <paul at claws-mail.org> ---
It doesn't know what account you used in the original mail.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 12:52:46 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 10:52:46 +0000
Subject: [Users] [Bug 2064] Replying to own emails
In-Reply-To: <bug-2064-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2064-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2064-595-31CMr4H8LF@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2064

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |WONTFIX

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 12:56:11 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 10:56:11 +0000
Subject: [Users] [Bug 2175] Reply to All includes sender when using this
 action on own messages
In-Reply-To: <bug-2175-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2175-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2175-595-dcKpAacskv@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2175

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |WORKSFORME

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 12:58:47 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 10:58:47 +0000
Subject: [Users] [Bug 3267] When replying Encrypt setting is lost when
 changing Accounts
In-Reply-To: <bug-3267-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3267-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3267-595-PJN2lip5Fy@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3267

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |PATCHESWELCOME

--- Comment #1 from Paul <paul at claws-mail.org> ---
That's because it takes the options from the newly selected account. That
option is only applied at the point you hit Reply.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 13:31:30 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 11:31:30 +0000
Subject: [Users] [Bug 2064] Replying to own emails
In-Reply-To: <bug-2064-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2064-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2064-595-fVz8P4TqJ5@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2064

Adam.Schmalhofer at gmx.de changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
         Resolution|WONTFIX                     |FIXED

--- Comment #2 from Adam.Schmalhofer at gmx.de ---
It has been many years since I posted this bug. And for the "reply-all" case as
described in the bug it does work now (tested with 3.13.2). If click on "reply"
instead it still has the old behavior. Personally I don't care about using a
simple "reply" (as I rarely use it and never on replying to myself) so I'm fine
with the new status-quo. So I'm marking this bug as "fixed".

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 16:47:25 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 14:47:25 +0000
Subject: [Users] [Bug 3576] ReplyToAll ignores Reply-To: field
In-Reply-To: <bug-3576-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3576-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3576-595-OKasTI5J66@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3576

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

--- Comment #2 from Paul <paul at claws-mail.org> ---
fixed in GIT:
http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=cdb37a157073468572cb4570be67c0ebc9c37235

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 16:59:05 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 14:59:05 -0000
Subject: [Users] [Bug 2518] "Reply-All" message from NNTP-account does not
 contain CC'ed correspondents
In-Reply-To: <bug-2518-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2518-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2518-595-VbNvcSJQF3@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2518

--- Comment #2 from users at lists.claws-mail.org ---
Changes related to this bug have been committed.
Please check latest Git and update the bug accordingly.
You can also get the patch from:
http://git.claws-mail.org/

++ ChangeLog    2016-07-04 16:59:03.152158022 +0200
http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=c080d60542c1ed18ebb8518c48e23c23212589a8
Merge: 3e3862b 2011344
Author: Colin Leroy <colin at colino.net>
Date:   Mon Jul 4 16:59:02 2016 +0200

    Merge branch 'master' of file:///home/git/claws

http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=20113442240ea0d6a590e37ceb09a9b547cae771
Author: Paul <paul at claws-mail.org>
Date:   Mon Jul 4 15:58:06 2016 +0100

    fix bug 2518, ' "Reply-All" message from NNTP-account does not contain
CC'ed correspondents'

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 16:59:22 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 14:59:22 +0000
Subject: [Users] [Bug 2518] "Reply-All" message from NNTP-account does not
 contain CC'ed correspondents
In-Reply-To: <bug-2518-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2518-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2518-595-OO8znaouAN@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2518

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 17:05:18 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 15:05:18 +0000
Subject: [Users] [Bug 2168] The "From" field in a reply should match the
 "To" in the replied e-mail
In-Reply-To: <bug-2168-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2168-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2168-595-80FH1vXbfs@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2168

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |WONTFIX

--- Comment #2 from Paul <paul at claws-mail.org> ---
Add SMTP-only accounts for those other addresses.
Or, filter them into their own folders, and set the From address in the Folder
Template.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 17:16:24 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 15:16:24 +0000
Subject: [Users] [Bug 3542] After moving a message to trash,
 claws selects the message above, not the one below
In-Reply-To: <bug-3542-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3542-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3542-595-9CHgEJrH33@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3542

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|REOPENED                    |RESOLVED
         Resolution|---                         |FIXED

--- Comment #5 from Paul <paul at claws-mail.org> ---

> ... but it works only for deletion, not for "move to trash" and "move to
> another folder". I hope it will be implemented for those too.

That is now implemented in GIT.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 17:24:51 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 15:24:51 +0000
Subject: [Users] [Bug 3097] crashes when accessing different gmail folders
 or when deleting messages
In-Reply-To: <bug-3097-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3097-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3097-595-XR62QFVNdD@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3097

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |WORKSFORME

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 17:30:50 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 15:30:50 +0000
Subject: [Users] [Bug 2733] spell checker could not change dictionary
In-Reply-To: <bug-2733-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2733-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2733-595-UJTBPVVvQZ@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2733

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |WORKSFORME

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 17:41:35 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 15:41:35 +0000
Subject: [Users] [Bug 2168] The "From" field in a reply should match the
 "To" in the replied e-mail
In-Reply-To: <bug-2168-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2168-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2168-595-angdAZh0V4@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2168

--- Comment #3 from Dimitris <clawsmail at ionos.gr> ---
Unfortunately, adding SMTP-only accounts or filtering based on folders is not
an option when we have too many email addresses.

Please consider those people who have 10+ email addresses for their business
and thus multiple inbox folders cause more work and they solve.

It would be nice if claws was clever to compare the incoming To: address with
the available From: addresses in the system and to choose cleverly when
replying. Much better than to create lots of SMTP-only accounts or folders per
email address.

Thank you.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 18:15:36 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 16:15:36 +0000
Subject: [Users] [Bug 2168] The "From" field in a reply should match the
 "To" in the replied e-mail
In-Reply-To: <bug-2168-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2168-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2168-595-qA2aXnmigF@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2168

--- Comment #4 from Paul <paul at claws-mail.org> ---
(In reply to comment #3)
> It would be nice if claws was clever to compare the incoming To: address
> with the available From: addresses in the system and to choose cleverly when
> replying. Much better than to create lots of SMTP-only accounts or folders
> per email address.

That's what it would be able to do with those SMTP-only accounts. SMTP-only
accounts are "addresses in the system"

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 18:18:31 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 16:18:31 +0000
Subject: [Users] [Bug 2168] The "From" field in a reply should match the
 "To" in the replied e-mail
In-Reply-To: <bug-2168-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2168-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2168-595-aG4GO2ZwgX@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2168

--- Comment #5 from Paul <paul at claws-mail.org> ---
(In reply to comment #4)
>  folders per email address.

You wouldn't need to do this, you just need to add %t as the From value in the
Folder Template. (One folder template)

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Mon Jul  4 19:00:31 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 04 Jul 2016 17:00:31 +0000
Subject: [Users] [Bug 3576] ReplyToAll ignores Reply-To: field
In-Reply-To: <bug-3576-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3576-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3576-595-e3sdu1Yb9E@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3576

--- Comment #3 from Jean Delvare <jdelvare at suse.de> ---
Great, thanks!

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul  5 16:43:15 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 05 Jul 2016 14:43:15 +0000
Subject: [Users] [Bug 3653] Upgrading from Mageia5 default (3.11.1),
 3.13.2git tries to load 3.11.1 plugins
In-Reply-To: <bug-3653-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3653-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3653-595-t9nHL1Ru8r@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3653

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

--- Comment #9 from Paul <paul at claws-mail.org> ---
Fixed in GIT:
http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=dc8db42475570161448318cf1677048fd7b90ea0

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul  5 17:16:07 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 05 Jul 2016 15:16:07 +0000
Subject: [Users] [Bug 3655] Gmail IMAP account asks to "Rebuild folder tree"
 on each launch
In-Reply-To: <bug-3655-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3655-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3655-595-XBMkrRHtRy@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3655

--- Comment #10 from Eric Siegel <nticompass at gmail.com> ---
(In reply to comment #9)
> Looking at the debug output, you have 3 accounts and they all appear to be
> the same gmail account. Is that right? If so, remove 2 of them. It may be
> better to quit claws-mail and remove 2 account blocks from
> ~/.claws-mail/accountrc rather than try to do it in Claws Mail. Backup
> before trying if in doubt.

I have 3 accounts because one is my main account that I send/receive using. 
The other 2 are send only.  That way when sending/replying I can choose which
"from" address I want to use.

Only one email should be set with IMAP/SMTP, the other 2 should be "SMTP only".

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul  5 20:50:41 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 05 Jul 2016 18:50:41 +0000
Subject: [Users] [Bug 3600] make next_on_delete work for Move To Trash
In-Reply-To: <bug-3600-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3600-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3600-595-JyBXQCLy3X@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3600

--- Comment #6 from Barry Warsaw <barry at python.org> ---
I did a quick build from source and test.  Looks good!  Thanks.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul  5 21:15:34 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 05 Jul 2016 19:15:34 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-CPk03O45uC@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

Ricardo Mones <mones at users.sourceforge.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
   Attachment #1666|                            |applied-
              Flags|                            |

--- Comment #1 from Ricardo Mones <mones at users.sourceforge.net> ---
Created attachment 1666
  -->
http://www.thewildbeast.co.uk/claws-mail/bugzilla/attachment.cgi?id=1666&action=edit
Possible fix for this and Debian bug #712758

Apply with 'git am 0001-Fix-bug-2176-autochk_interval-granularity-is-low.patch'

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul  5 21:57:45 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 05 Jul 2016 19:57:45 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-8qVkN2L5oR@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

--- Comment #2 from Andrej Kacian <andrej at kacian.sk> ---
Wouldn't it be better to only store the value in seconds? It can get calculated
into hours and minutes when it needs to be displayed in the UI.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Wed Jul  6 09:32:59 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Wed, 06 Jul 2016 07:32:59 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-kd2HKxRdKh@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

--- Comment #3 from Ricardo Mones <mones at users.sourceforge.net> ---
(In reply to comment #2)
> Wouldn't it be better to only store the value in seconds? It can get
> calculated into hours and minutes when it needs to be displayed in the UI.

Probably, but that needs migration code not to lose configuration of current
users, which also needs some testing to ensure correct migration.

I took the lazy way: no migration code as minutes before are still minutes
after upgrading, simpler widget management and just a minimal CPU overhead when
calculating time.

The other option is to just require all users to reconfigure their settings,
but that looks even less desirable than migration code to me :)

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Wed Jul  6 13:42:27 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Wed, 06 Jul 2016 11:42:27 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-2W6ZWjPOOr@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

--- Comment #4 from Andrej Kacian <andrej at kacian.sk> ---
Or just introduce new preference to store the value in seconds, and treat the
current one as obsolete - prioritize its value (and convert to seconds) if it's
found in config, but never write it to config.

BTW, this could all have been easier if we adopted config versioning, like I
suggested few years ago. :)

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Wed Jul  6 14:03:21 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Wed, 06 Jul 2016 12:03:21 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-qd75MCJrAP@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

--- Comment #5 from Ricardo Mones <mones at users.sourceforge.net> ---
(In reply to comment #4)
> Or just introduce new preference to store the value in seconds, and treat
> the current one as obsolete - prioritize its value (and convert to seconds)
> if it's found in config, but never write it to config.

That's "migration code" explained, yeah :-)

> BTW, this could all have been easier if we adopted config versioning, like I
> suggested few years ago. :)

Agreed completely.
Not sure what has prevented config versioning from being adopted though.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From m8il1ists at gmail.com  Wed Jul  6 15:12:13 2016
From: m8il1ists at gmail.com (Kevin Chadwick)
Date: Wed, 6 Jul 2016 14:12:13 +0100
Subject: [Users] POP3 download all messages
Message-ID: <20160706141213.146c2206@expedite.oesys.co>

I can't seem to find the option to download all messages on the server?

Can someone point out where it is?

Using that option and then delete duplicates is the quickest method to
recover from a power failure just after downloading messages?


-- 

KISSIS - Keep It Simple So It's Securable


From claws at thewildbeast.co.uk  Wed Jul  6 14:32:38 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Wed, 6 Jul 2016 13:32:38 +0100
Subject: [Users] POP3 download all messages
In-Reply-To: <20160706141213.146c2206@expedite.oesys.co>
References: <20160706141213.146c2206@expedite.oesys.co>
Message-ID: <20160706133238.5e97f229@kujata>

On Wed, 6 Jul 2016 14:12:13 +0100
Kevin Chadwick <m8il1ists at gmail.com> wrote: 

> I can't seem to find the option to download all messages on the
> server?

It does that by default. There are options to leave messages on the
server. If you set this then the old mails stay there and are not
re-downloaded.

> Can someone point out where it is?
> 
> Using that option and then delete duplicates is the quickest method
> to recover from a power failure just after downloading messages?

I guess you leave msgs on the server, but now want to download ones
that you had previously downloaded. In which case:

quit claws-mail.
locate the file corresponding to your account in ~/.claws-mail/uidl/
and delete its contents.
start claws-mail and get all mail on the server.

with regards

Paul


From noreply at thewildbeast.co.uk  Wed Jul  6 15:33:31 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Wed, 06 Jul 2016 13:33:31 +0000
Subject: [Users] [Bug 3656] New: Office function for GPG-Mails
Message-ID: <bug-3656-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3656

            Bug ID: 3656
           Summary: Office function for GPG-Mails
    Classification: Unclassified
           Product: Claws Mail
           Version: 3.11.1
          Hardware: PC
               URL: http://public.abades.dynu.net/code/
                OS: Linux
            Status: NEW
          Severity: enhancement
          Priority: P3
         Component: Plugins/Privacy
          Assignee: users at lists.claws-mail.org
          Reporter: orinoco at bairux.abades.dynu.net

Hi,

I have a suggestion concerning the integration of GPG/PGP in claws-mail.

For a seamless integration of encrypted mails it's important for me to
have some kind of office function for encrypted mails:

receiving encrypted mails: decrypt and store as plain text, 
but marked with the encryption flag indicating "was encrypted/reply
should be encrypted"

sending encrypted mails: encrypt and store copy-to-self as plain text,
but marked with the encryption flag indicating "was sent encrypted"

It's much like in the old paper work days, when you removed the paper
envelope from a letter and put it into the file folder and the carbon
copy that was created on the typewriter.

I managed to get this office function approximately by coding some bash
scripts, but that's not a seamless integration itself into claws-mail.
> http://public.abades.dynu.net/code/
So a proper integration of this office function into the GPG plugin
would be better. I think this would be an improvement for better user
acceptance of encryption. claws-mail would be the 1st MUA to offer such
a sophisticated PGP office function. AFAIK no other MUA offers a
similar one.

My scripts are just a workaround and provide only a basic office function.
It could offer much more sophisticated functions e.g. attaching the original
GPG-Mail or information about the public key it was encrypted/signed with.


Kind regards

Orinoco

-- 
You are receiving this mail because:
You are the assignee for the bug.


From claws-mail at bercot.org  Fri Jul  8 15:02:07 2016
From: claws-mail at bercot.org (David BERCOT)
Date: Fri, 8 Jul 2016 15:02:07 +0200
Subject: [Users] Hydra repository ?
Message-ID: <20160708150207.62560857@debian-david.bercot.org>

Hello,

I can't join anymore the GIT repository for deb packages : http://hydra.debian.net/
Is it only a temporary problem ?

Thank you.

David.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: Signature digitale OpenPGP
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160708/7710b707/attachment.sig>

From pf at pfortin.com  Sat Jul  9 23:21:09 2016
From: pf at pfortin.com (Pierre Fortin)
Date: Sat, 9 Jul 2016 17:21:09 -0400
Subject: [Users] CM goes unresponsive...
Message-ID: <20160709172109.367c6745@pfortin.com>

Hi,

Been noticing some weird delays recently where switching from one message
to another in the same folder takes many seconds.  When this happens, I
also see a cursor consisting of 2 circles rotating around each other.

Today, I'm seeing just total hangs for 30 seconds when switching between
messages; even back to a message that was just opened prior to the
current one.

Attached strace and dead silence until the 30 seconds is up...  here's a
sample output:

open("/home/pfortin/Mail/inbox/SneakySPAM/435", O_RDONLY) = 36
fstat(36, {st_mode=S_IFREG|0600, st_size=6955, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x7f0108004000 lseek(36, 0, SEEK_SET)                  = 0
read(36, "Received: via dmail-2010.19 for "..., 4096) = 4096
stat("/home/pfortin/.claws-mail/avatarcache/a016bc8af5d2b254f73392180a641af5",
0x7ffcb7576010) = -1 ENOENT (No such file or directory)
stat("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=212, ...}) = 0
clone(child_stack=0x7f006b7fddf0,
flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID,
parent_tidptr=0x7f006b7fe9d0, tls=0x7f006b7fe700,
child_tidptr=0x7f006b7fe9d0) = 15558 futex(0x7f011ec15548, FUTEX_WAKE,
1)    = 1 futex(0x5710de0, FUTEX_WAKE, 1)         = 1 futex(0x8a67098,
FUTEX_WAIT, 0, NULL

# hung here

)   = 0
stat("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=212, ...}) = 0
futex(0x5710df0, FUTEX_WAKE, 1)         = 1
futex(0x5710de0, FUTEX_WAKE, 1)         = 1
futex(0x1ae8888, FUTEX_WAIT, 0, NULL

# output the above; but still hung

)   = 0
open("/home/pfortin/.claws-mail/avatarcache/a016bc8af5d2b254f73392180a641af5",
O_WRONLY|O_CREAT|O_TRUNC, 0666) = 37 open("/etc/hosts",
O_RDONLY|O_CLOEXEC)  = 38 fstat(38, {st_mode=S_IFREG|0644,
st_size=35, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0108003000 read(38, "127.0.0.1
prf.pfortin.com   p"..., 4096) = 35 read(38, "",
4096)                      = 0 close(38)                               = 0

Since some files appear to be in the picture, they contain: 

/etc/resolv.conf:
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by
resolvconf(8) #     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN 
nameserver 192.168.1.1
nameserver 8.8.8.8
search pfortin.com

/home/pfortin/.claws-mail/avatarcache/a016bc8af5d2b254f73392180a641af5:
--- no such file

/etc/hosts:
127.0.0.1    prf.pfortin.com   prf

Anyone else seeing weird, unexplained delays?

Pierre


From pf at pfortin.com  Sat Jul  9 23:32:53 2016
From: pf at pfortin.com (Pierre Fortin)
Date: Sat, 9 Jul 2016 17:32:53 -0400
Subject: [Users] CM goes unresponsive...
In-Reply-To: <20160709172109.367c6745@pfortin.com>
References: <20160709172109.367c6745@pfortin.com>
Message-ID: <20160709173253.5e3ab28f@pfortin.com>

On Sat, 9 Jul 2016 17:21:09 -0400 Pierre Fortin wrote:

>Been noticing some weird delays recently

Thanks to Ticho on IRC; this appears to be due to labravatar. Unloaded it
and not seeing delays now...


From claws-mail at bercot.org  Mon Jul 11 11:25:28 2016
From: claws-mail at bercot.org (David BERCOT)
Date: Mon, 11 Jul 2016 11:25:28 +0200
Subject: [Users] Hydra repository ?
In-Reply-To: <20160708150207.62560857@debian-david.bercot.org>
References: <20160708150207.62560857@debian-david.bercot.org>
Message-ID: <20160711112528.3772c28d@debian-david.bercot.org>

Hello,

I suppose I was not the only user of this repository ;-)

No one else used it ?

Thank you.

David.

Le Fri, 8 Jul 2016 15:02:07 +0200,
David BERCOT <claws-mail at bercot.org> a écrit :
> Hello,
> 
> I can't join anymore the GIT repository for deb packages : http://hydra.debian.net/
> Is it only a temporary problem ?
> 
> Thank you.
> 
> David.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: Signature digitale OpenPGP
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160711/85b54168/attachment.sig>

From ricardo at mones.org  Mon Jul 11 12:47:53 2016
From: ricardo at mones.org (Ricardo Mones)
Date: Mon, 11 Jul 2016 12:47:53 +0200
Subject: [Users] Hydra repository ?
In-Reply-To: <20160708150207.62560857@debian-david.bercot.org>
References: <20160708150207.62560857@debian-david.bercot.org>
Message-ID: <20160711104753.GD22376@busgosu.mones.org>

Hi David,

On Fri, Jul 08, 2016 at 03:02:07PM +0200, David BERCOT wrote:
> Hello,
> 
> I can't join anymore the GIT repository for deb packages : http://hydra.debian.net/
> Is it only a temporary problem ?

Don't really know. There was change of IP addresses, which I was aware
and was pending a DNS update.

Right now the server is down and I'm not able to make it go up, so I've
contacted provider's support.

regards,
-- 
  Ricardo Mones 
  ~
  RTFM - "Read The Manual" (The 'F' is silent). Usually a very good 
  idea.                                             Bjarne Stroustrup

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160711/258a10e4/attachment.sig>

From noreply at thewildbeast.co.uk  Mon Jul 11 13:20:32 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 11 Jul 2016 11:20:32 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-GZ09Dthciw@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

--- Comment #6 from Ricardo Mones <mones at users.sourceforge.net> ---
(In reply to comment #4)
> Or just introduce new preference to store the value in seconds, and treat
> the current one as obsolete - prioritize its value (and convert to seconds)
> if it's found in config, but never write it to config.

To avoid leaving obsolete prefs behind, what about keeping current preference
but with a new format hh:mm:ss (string):

* on reading pref: 
 - if just a number is found it's assumed to be minutes (nobody has to touch
their configs) and converted to seconds internally
 - if hh:mm:ss is found, its converted to seconds

* on saving pref:
 - it's saved as hh:mm:ss from internal seconds value

This has a side effect of having also a human readable format in clawsrc :-)

-- 
You are receiving this mail because:
You are the assignee for the bug.


From claws-mail at bercot.org  Mon Jul 11 13:26:54 2016
From: claws-mail at bercot.org (David BERCOT)
Date: Mon, 11 Jul 2016 13:26:54 +0200
Subject: [Users] Hydra repository ?
In-Reply-To: <20160711104753.GD22376@busgosu.mones.org>
References: <20160708150207.62560857@debian-david.bercot.org>
 <20160711104753.GD22376@busgosu.mones.org>
Message-ID: <20160711132654.12645edc@debian-david.bercot.org>

Hi Ricardo,

Thank you for the answer.

Now, I have to be patient ;-)

David.

Le Mon, 11 Jul 2016 12:47:53 +0200,
Ricardo Mones <ricardo at mones.org> a écrit :
> Hi David,
> 
> On Fri, Jul 08, 2016 at 03:02:07PM +0200, David BERCOT wrote:
> > Hello,
> > 
> > I can't join anymore the GIT repository for deb packages : http://hydra.debian.net/
> > Is it only a temporary problem ?  
> 
> Don't really know. There was change of IP addresses, which I was aware
> and was pending a DNS update.
> 
> Right now the server is down and I'm not able to make it go up, so I've
> contacted provider's support.
> 
> regards,
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: Signature digitale OpenPGP
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160711/cedc1af3/attachment.sig>

From ricardo at mones.org  Mon Jul 11 18:08:31 2016
From: ricardo at mones.org (Ricardo Mones)
Date: Mon, 11 Jul 2016 18:08:31 +0200
Subject: [Users] Hydra repository ?
In-Reply-To: <20160711132654.12645edc@debian-david.bercot.org>
References: <20160708150207.62560857@debian-david.bercot.org>
 <20160711104753.GD22376@busgosu.mones.org>
 <20160711132654.12645edc@debian-david.bercot.org>
Message-ID: <20160711180831.2028ea3f@busgosu>

On Mon, 11 Jul 2016 13:26:54 +0200
David BERCOT <claws-mail at bercot.org> wrote:

> Now, I have to be patient ;-)

Indeed, best timeframe so far for something to happen is next Saturday.

regards,
-- 
  Ricardo Mones 
  ~
  The world will end in 5 minutes. Please log out.            Unknown

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160711/ca93f42c/attachment.sig>

From noreply at thewildbeast.co.uk  Mon Jul 11 21:07:22 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Mon, 11 Jul 2016 19:07:22 +0000
Subject: [Users] [Bug 3657] New: Downloading attachment failed. message
 :"can't write file"
Message-ID: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

            Bug ID: 3657
           Summary: Downloading attachment failed. message :"can't write
                    file"
    Classification: Unclassified
           Product: Website
           Version: unspecified
          Hardware: PC
                OS: Linux
            Status: NEW
          Severity: major
          Priority: P3
         Component: General
          Assignee: users at lists.claws-mail.org
          Reporter: edmundzed at gmail.com

Linux Mint 17.2 XFCE
Claws 3.11.1

Error while downloading attachment, hangs at around 30 MB, log file :
"can't write file"

After that the email address is unusable, I first have to use the web browser
go to "webmail" and delete the email(s) with the attachment.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 07:44:18 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 05:44:18 +0000
Subject: [Users] [Bug 3658] New: Passphrase ignored during keypair
 generation with gpg2
Message-ID: <bug-3658-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3658

            Bug ID: 3658
           Summary: Passphrase ignored during keypair generation with gpg2
    Classification: Unclassified
           Product: Claws Mail
           Version: GIT
          Hardware: PC
                OS: Linux
            Status: NEW
          Severity: minor
          Priority: P3
         Component: Plugins/Privacy
          Assignee: users at lists.claws-mail.org
          Reporter: andrej at kacian.sk

When generating new PGP key pair from within Claws Mail (e.g. "Generate new
keypair" button in account preferences), the application asks for a passphrase
twice, but this passphrase is then ignored by gpg2, which displays its own
passphrase dialog, using pinentry.

This works fine when gpg 1.x (1.4.20 in my case) is forced on Claws Mail.

-- 
You are receiving this mail because:
You are the assignee for the bug.
You are watching the reporter of the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 09:33:17 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 07:33:17 +0000
Subject: [Users] [Bug 2304] QA warning of compiler in vcalendar plugin
In-Reply-To: <bug-2304-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2304-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2304-595-nEnYjydUpM@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2304

Ricardo Mones <mones at users.sourceforge.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

--- Comment #1 from Ricardo Mones <mones at users.sourceforge.net> ---
Fixed in commit:
http://git.claws-mail.org/?p=claws.git;a=commit;h=6d45e57eb7e414bb4d276f2f3c9fc06ecb79726c

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 09:44:16 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 07:44:16 +0000
Subject: [Users] [Bug 3130] vcalendar access of google ics address causes
	crash
In-Reply-To: <bug-3130-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3130-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3130-595-mgQ1I3HBmm@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3130

Ricardo Mones <mones at users.sourceforge.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |WORKSFORME

--- Comment #1 from Ricardo Mones <mones at users.sourceforge.net> ---
Sorry for the late reply to your report.

Unfortunately there's several new releases of Claws Mail since the one you're
reporting, and AFAIK there's no recent reports of crashes with vCalendar in
Windows, so I'm closing this.

If you can reproduce the crash with a recent version¹ you can try to get a
backtrace of the crash² in your system.

Then reopen this bug and attach the backtrace you obtained.

Thanks in advance,

¹ http://www.claws-mail.org/win32/
² http://www.claws-mail.org/faq/index.php/Debugging_Claws

-- 
You are receiving this mail because:
You are the assignee for the bug.

From noreply at thewildbeast.co.uk  Tue Jul 12 09:54:54 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 07:54:54 +0000
Subject: [Users] [Bug 2707] crash in vcalendar / event_get_from_xml
In-Reply-To: <bug-2707-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2707-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2707-595-NW2LvjtPkl@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2707

Ricardo Mones <mones at users.sourceforge.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |WORKSFORME

--- Comment #1 from Ricardo Mones <mones at users.sourceforge.net> ---
Sorry for the late reply.

Unfortunately this is now a very old version, and OS version is not even
maintained, hence closing this report.

Please reopen if reporter can reproduce with current Fedora/Claws Mail
versions.

Thanks in advance,

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 10:05:43 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 08:05:43 +0000
Subject: [Users] [Bug 3659] New: Make possible to hide "Meetings" folder
Message-ID: <bug-3659-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3659

            Bug ID: 3659
           Summary: Make possible to hide "Meetings" folder
    Classification: Unclassified
           Product: Claws Mail
           Version: 3.13.2
          Hardware: All
                OS: All
            Status: NEW
          Severity: enhancement
          Priority: P3
         Component: Plugins/vCalendar
          Assignee: users at lists.claws-mail.org
          Reporter: mones at users.sourceforge.net

Summarizing original reporter request:

- User only uses a remote calendar and "Meetings" folder is not used.
- To avoid opening it by mistake would like the folder to be deleted.

Hidding it could be probably easier to implement to achieve the desired
outcome.

Full details on original bug report: https://bugs.debian.org/829467

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 10:23:30 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 08:23:30 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-NqhmbJfBWw@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |INVALID

--- Comment #1 from Paul <paul at claws-mail.org> ---
That's a gmail restriction, nothing we can do about that:
https://support.google.com/a/answer/175121?hl=en

-- 
You are receiving this mail because:
You are the assignee for the bug.


From shannf at netspace.net.au  Tue Jul 12 10:46:20 2016
From: shannf at netspace.net.au (Frank Shann)
Date: Tue, 12 Jul 2016 18:46:20 +1000
Subject: [Users] BSFilter does not work in Claws in Windows 7 64-bit
Message-ID: <20160712184620.00005b2a@netspace.net.au>

I have just installed Claws 3.13.2 in Windows 7 64-bit. It is an
excellent program, thank you. However, when I add BSFilter,
downloads time-out (even when I have filled out all the options).
"Error. The BSFilter plugin couldn't filter a message. The command
'bsfilterw.exe' couldn't be run." bsfilterw.exe is in C:\Program Files
(x86)\Claws Mail. 

Can anyone help me to get BSFilter to run?

Frank



From noreply at thewildbeast.co.uk  Tue Jul 12 11:46:15 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 09:46:15 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-m5nbowK0qb@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

edmund <edmundzed at gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|RESOLVED                    |REOPENED
         Resolution|INVALID                     |---

--- Comment #2 from edmund <edmundzed at gmail.com> ---
(In reply to comment #1)
> That's a gmail restriction, nothing we can do about that:
> https://support.google.com/a/answer/175121?hl=en

In this case the problem isn't gmail because it isn't a gmail account.
Neither is it a problem of the other provider ( gmx.net ) because on another
computer the files are received without any problem.

To make it even more complicated, it holds the same version of Claws that gives
this error under MINT.
No error under Ubuntu-Studio although both Mint and Ubuntu( studio ) should
behave identical as far as I know.

Searching for a solution I stumbled upon very similar problems but those where
all under Windows. Still it might be helpful finding a solution.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 11:56:12 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 09:56:12 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-zWbCeLd22n@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
          Component|General                     |Folders/IMAP
            Version|unspecified                 |3.11.1
            Product|Website                     |Claws Mail

--- Comment #3 from Paul <paul at claws-mail.org> ---
Ok. Then you need to provide more (accurate) information.
e.g. the debug output when this happens (start with `claws-mail --debug`).
Does this happen with the latest claws-mail release (3.13.2)?

If you're saying that this happens on Mint, but doesn't happen on ubuntu with
the very same version, then it appears to be a local problem, and is still,
therefore, INVALID.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From andrej at kacian.sk  Tue Jul 12 12:12:21 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Tue, 12 Jul 2016 12:12:21 +0200
Subject: [Users] BSFilter does not work in Claws in Windows 7 64-bit
In-Reply-To: <20160712184620.00005b2a@netspace.net.au>
References: <20160712184620.00005b2a@netspace.net.au>
Message-ID: <20160712121221.53656e58@hiker>

On Tue, 12 Jul 2016 18:46:20 +1000
Frank Shann <shannf at netspace.net.au> wrote:

> I have just installed Claws 3.13.2 in Windows 7 64-bit. It is an
> excellent program, thank you. However, when I add BSFilter,
> downloads time-out (even when I have filled out all the options).
> "Error. The BSFilter plugin couldn't filter a message. The command
> 'bsfilterw.exe' couldn't be run." bsfilterw.exe is in C:\Program Files
> (x86)\Claws Mail. 
> 
> Can anyone help me to get BSFilter to run?

Hi Frank,

I think I have found the bug, and am fixing it for the next release, but
just to be sure that it's the same bug you're seeing, can you please run
Claws Mail in debug mode?

You can do so by adding a --debug switch either to the desktop
shortcut, or executing this from a text console (cmd.exe):

"c:\program files (x86)\claws mail\claws-mail.exe" --debug

Then, in Claws Mail, try one unsuccesful download like you described,
exit Claws Mail, and send me resulting debug file, which should be in
c:\users\yourusername\appdata\local\temp\claws-win32.log.

Thanks,
-- 
Andrej


From noreply at thewildbeast.co.uk  Tue Jul 12 15:06:13 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 13:06:13 +0000
Subject: [Users] [Bug 3652] utils.c:4740:47: warning: ordered comparison of
 pointer with integer zero [-Wextra]
In-Reply-To: <bug-3652-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3652-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3652-595-oxFqqrVcwi@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3652

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 15:12:19 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 13:12:19 +0000
Subject: [Users] [Bug 3602] 3.13.2 can't build on OS X without change to
 src/Makefile.am
In-Reply-To: <bug-3602-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3602-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3602-595-2rYHfTzY7e@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3602

--- Comment #1 from Paul <paul at claws-mail.org> ---
(In reply to comment #0)
> I'd submit a patch but I'm unsure about what if PLATFORM_ goop I need to
> specify OS X.

Did you try PLATFORM_OSX ? What else did you try?

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 15:29:16 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 13:29:16 +0000
Subject: [Users] [Bug 3602] 3.13.2 can't build on OS X without change to
 src/Makefile.am
In-Reply-To: <bug-3602-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3602-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3602-595-GHYsvHiArl@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3602

--- Comment #2 from Andrej Kacian <andrej at kacian.sk> ---
There are no established PLATFORM_* macros or variables. "PLATFORM_WIN32" is
something we define ourselves, based on our own checks. Look at configure.ac,
around line 113 and below.

You have to write your own check - probably something about "darwin" or "osx"
being in the host triplet string, similar to how we check for Windows. Based on
that, you can set PLATFORM_WHATEVERYOUWANT variable (but name it sanely, please
:) ), and use it in Makefile.am and elsewhere.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 15:49:35 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 13:49:35 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-koMvrgMhP5@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

--- Comment #4 from edmund <edmundzed at gmail.com> ---
(In reply to comment #3)
> Ok. Then you need to provide more (accurate) information.
> e.g. the debug output when this happens (start with `claws-mail --debug`).
> Does this happen with the latest claws-mail release (3.13.2)?
> 
> If you're saying that this happens on Mint, but doesn't happen on ubuntu
> with the very same version, then it appears to be a local problem, and is
> still, therefore, INVALID.

edmund at edmund-tuxedo ~ $ claws-mail --debug
claws.c:102:Starting Claws Mail version Claws Mail 3.11.1
utils.c:1924:using default rc_dir /home/edmund/.claws-mail
main.c:2174:Using control socket
/tmp/claws-mail-1000/fa99e16834788c87886f5873cb067ffa
main.c:2238:Opening socket
/tmp/claws-mail-1000/fa99e16834788c87886f5873cb067ffa
main.c:769:runtime GTK+ 2.24.23 / GLib 2.40.2
main.c:777:buildtime GTK+ 2.24.23 / GLib 2.40.2
main.c:786:Compiled-in features:
main.c:791: compface
main.c:797: Enchant
main.c:803: GnuTLS
main.c:809: IPv6
main.c:815: iconv
main.c:821: JPilot
main.c:827: LDAP
main.c:833: libetpan 1.5
main.c:839: libSM
main.c:845: NetworkManager
prefs_gtk.c:1036:new file '/home/edmund/.claws-mail/clawsrc'
prefs_gtk.c:995:new section 'Common'
prefs_gtk.c:995:new section 'Plugins_Common'
prefs_gtk.c:995:new section 'Plugins_GTK2'
prefs_gtk.c:995:new section 'VCalendar'
prefs_gtk.c:1036:new file '/home/edmund/.claws-mail/folderitemrc'
prefs_gtk.c:995:new section '#mh/Mailbox/inbox/Bestel'
prefs_gtk.c:995:new section '#mh/Mailbox/inbox/edmundzed'
prefs_gtk.c:995:new section '#mh/Mailbox/inbox/etzzed'
prefs_gtk.c:995:new section '#news/News-tera/nl.auto'
prefs_gtk.c:995:new section '#mh/Mailbox/inbox/Afspraken/GeschillenCommissie'
prefs_gtk.c:995:new section '#news/eternal-september/nl.auto'
prefs_gtk.c:995:new section '#news/eternal-september/hetnet.hobby.huisdieren'
prefs_gtk.c:995:new section '#news/eternal-september/alt.sport.ufc'
prefs_gtk.c:995:new section '#news/eternal-september/hr.rec.automobili.audio'
prefs_gtk.c:1036:new file '/home/edmund/.claws-mail/accountrc'
prefs_gtk.c:995:new section 'Account: 1'
prefs_gtk.c:995:new section 'Account: 3'
prefs_gtk.c:995:new section 'Account: 5'
prefs_gtk.c:995:new section 'Account: 6'
prefs_gtk.c:995:new section 'Account: 7'
main.c:2792:/dev/mem_notify not available (No such file or directory)
hooks.c:71:registed new hook for 'folder_item_update' as id 1
hooks.c:71:registed new hook for 'folder_update' as id 1
prefs.c:297:Found [Plugins_Common]
current dir: /home/edmund/.claws-mail
.comments: unlink: Is a directory
current dir: /home/edmund
folder.c:123:registering folder class mh
folder.c:123:registering folder class imap
folder.c:123:registering folder class news
prefs_gtk.c:86:Reading configuration...
prefs_themes.c:373:Creating preferences for themes...
stock_pixmap.c:499:dir /home/edmund/.claws-mail/themes not found, skipping
theme scan
stock_pixmap.c:499:dir /usr/share/claws-mail/themes not found, skipping theme
scan
prefs_actions.c:443:Reading actions configurations...
prefs_display_header.c:429:Reading configuration for displaying headers...
addressbook.c:4141:Reading address index...
addressbook.c:4190:done.
mainwindow.c:1447:Creating main window...
toolbar.c:724:read Toolbar Configuration from toolbar_main.xml
folderview.c:580:Creating folder view...
folderview.c:412:creating tree...
hooks.c:71:registed new hook for 'folder_update' as id 2
hooks.c:71:registed new hook for 'folder_item_update' as id 2
summaryview.c:525:Creating summary view...
hooks.c:71:registed new hook for 'msginfo_update' as id 1
hooks.c:71:registed new hook for 'folder_item_update' as id 3
hooks.c:71:registed new hook for 'folder_update' as id 3
messageview.c:404:Creating message view...
headerview.c:73:Creating header view...
noticeview.c:73:Creating notice view...
mimeview.c:270:Creating MIME view...
noticeview.c:73:Creating notice view...
textview.c:289:Creating text view...
hooks.c:71:registed new hook for 'msginfo_update' as id 2
logwindow.c:88:Creating log window...
hooks.c:71:registed new hook for 'log_append_text' as id 1
logwindow.c:88:Creating log window...
hooks.c:71:registed new hook for 'debug_append_text' as id 1
** Message: filtering log disabled

mainwindow.c:2107:done.
mainwindow.c:3639:Setting widgets... mainwindow.c:3844:done.
hooks.c:71:registed new hook for 'sslcert_ask' as id 1
hooks.c:71:registed new hook for 'progressindicator_hooklist' as id 1
hooks.c:71:registed new hook for 'sslcert_get_client_cert' as id 1
hooks.c:71:registed new hook for 'sslcert_get_password' as id 1
account.c:200:Reading all config for each account...
account.c:215:Found label: Account: 1
account.c:215:Found label: Account: 3
account.c:215:Found label: Account: 5
account.c:215:Found label: Account: 6
account.c:215:Found label: Account: 7
codeconv.c:1485:current locale: en_US.UTF-8
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_customheader.c:333:Reading custom header configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_customheader.c:333:Reading custom header configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_customheader.c:333:Reading custom header configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_customheader.c:333:Reading custom header configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_customheader.c:333:Reading custom header configuration...
folderview.c:325:setting titles...
folderview.c:758:called inc_lock (lock count 1)
folderview.c:759:Setting folder info...
folderview.c:785:called inc_unlock (lock count 0)
summaryview.c:1243:called inc_lock (lock count 1)
summaryview.c:1316:empty folder ((nil) (null) (nil) 0)

summaryview.c:1328:called inc_unlock (lock count 0)
summaryview.c:1329:TIMING summary_show : 0s000ms
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/trash' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/draft' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/sent' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/queue' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/etzzed/Auto' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/etzzed/Medisch' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/zedsoft' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Freud' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Versatel' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/TC' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/TC/Remote' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/TC/Printmaten' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/TC/TonLeugens' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/TC/Planning' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/TC/Interessant' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/LinuxMint' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/UbuntuStudio' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/Remote' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/ebay' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/Bleip' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/Huawei' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/WineBugs' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/Ebay' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/Ihaveadreambox' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/vuplus-community.net' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/modelenginemaker.com' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/GPS' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/GPS/GPSPower-net' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/Telecomvergelijker' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/partedMagic' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/autoscoutNL' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/autoscoutDE' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/DD-WRT' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/Amazon' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/Adroidforums.com' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/tweedehandsnet' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/SneurdersNL' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/D-Link' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/VIX' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/newsserver' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Pass/Bugzilla' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Fam' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Karlijn' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Sat' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Sat/Beekman' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Sat/VU' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Sat/Bhazz' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Bestel/Paypal' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Bestel/Vectone' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Bestel/D-Link' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Bestel/localphone' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Bugs' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Bugs/Audacity' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Bugs/Office' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Bugs/Support' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Bouke' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Basic' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Fiets' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Music' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Patents' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Verbouwing' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Websites' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Tandarts' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Spaans' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/SWorks' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/edmundzed/Steam' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
prefs_gtk.c:1103:no '#mh/Mailbox/inbox/Afspraken' section in
'/home/edmund/.claws-mail/folderitemrc' cache
prefs_gtk.c:86:Reading configuration...
folder.c:1212:Counting total number of messages...
main.c:895:The name com.google.code.Awn was not provided by any .service files
folderview.c:758:called inc_lock (lock count 1)
folderview.c:759:Setting folder info...
msgcache.c:603:    Reading swapped message cache from
/home/edmund/Mail/queue/.claws_cache...
msgcache.c:619:using Noop Converter
msgcache.c:791:done. (0 items read)
msgcache.c:792:Cache size: 0 messages, 0 bytes
msgcache.c:822:reading swapped mark file.
msgcache.c:916:reading swapped tags file.
folder.c:2708:TIMING folder_item_read_cache : 0s000ms
folder.c:2569:Total cache memory usage: 0
msgcache.c:275:TIMING msgcache_get_msg_list : 0s000ms
folderview.c:785:called inc_unlock (lock count 0)
folder.c:1212:Counting total number of messages...
main.c:895:The name com.google.code.Awn was not provided by any .service files
folderview.c:758:called inc_lock (lock count 1)
folderview.c:759:Setting folder info...
msgcache.c:275:TIMING msgcache_get_msg_list : 0s000ms
folderview.c:785:called inc_unlock (lock count 0)
folderview.c:758:called inc_lock (lock count 1)
folderview.c:759:Setting folder info...
msgcache.c:275:TIMING msgcache_get_msg_list : 0s000ms
folderview.c:785:called inc_unlock (lock count 0)
inc.c:1467:added timer = 101
hooks.c:71:registed new hook for 'avatar_image_render' as id 1
prefs.c:297:Found [Plugins_GTK2]
prefs_gtk.c:1074:destroying cache
main.c:1557:TIMING main startup: 0s171ms
inc.c:1479:removed timer = 101
inc.c:1467:added timer = 152
inc.c:1479:removed timer = 152
progressdialog.c:68:Creating progress dialog...
inc.c:797:getting new messages of account etzed...
** Message: Account 'etzed': Connecting to POP3 server: pop.gmx.net:995...

ssl.c:229:waiting for SSL_connect thread...
ssl.c:247:SSL_connect thread returned 0
ssl_certificate.c:260:got 173 certs in crt_list! 0x7ffc5cdccb98
ssl_certificate.c:439:got /home/edmund/.claws-mail/certs/pop.gmx.net.995.cert
first try
ssl_certificate.c:260:got 1 certs in crt_list! 0x7ffc5cdcca08
ssl_certificate.c:449:got cert 0x1fd8a80
ssl_certificate.c:176:writing 2594 bytes
ssl_certificate.c:176:writing 2350 bytes
ssl_certificate.c:176:writing 1318 bytes
session.c:191:session (0x1b96000): connected
[15:48:38] POP3< +OK POP server ready H migmx117 0Lv1PP-1bETjT1tP0-010TJy
[15:48:38] POP3> USER etzed at gmx.net
[15:48:38] POP3< +OK password required for user "etzed at gmx.net"
[15:48:38] POP3> PASS ********
[15:48:38] POP3< +OK mailbox "etzed at gmx.net" has 28 messages (49535017 octets)
H migmx117
[15:48:38] POP3> STAT
[15:48:38] POP3< +OK 28 49535017
[15:48:38] POP3> UIDL
[15:48:38] POP3< +OK
pop.c:274:num 1 uidl 0MXFXN-1aqTFW12d3-00WHGk: already got it
pop.c:274:num 2 uidl 0LZl0u-1bhg501NM4-00lTN4: already got it
pop.c:274:num 3 uidl 0MQ8PH-1bGgEY3fAR-005LZB: already got it
pop.c:274:num 4 uidl 0MVryq-1anuqh1xVI-00X7go: already got it
pop.c:274:num 5 uidl 0MecWC-1awi2Z42pM-00OHy3: already got it
pop.c:274:num 6 uidl 0MWwtE-1aoxFW0DHY-00VzZ8: already got it
pop.c:274:num 7 uidl 0MUUb5-1auk4P3nmN-00RH7M: already got it
pop.c:274:num 8 uidl 0MUkv6-1amlL932Mu-00Y9B8: already got it
pop.c:274:num 9 uidl 0Mc8x1-1b2AFG3TnD-00JZ4h: already got it
pop.c:274:num 10 uidl 0LoJTp-1bo5Wo36hl-00gGKZ: already got it
pop.c:274:num 11 uidl 0LqmRO-1bpRov0hKE-00eKiE: already got it
pop.c:274:num 12 uidl 0M2043-1baPUz2Hlr-00u2XR: already got it
pop.c:274:num 13 uidl 0LoJgD-1atJhJ19AH-00gDK2: already got it
pop.c:274:num 14 uidl 0M3uzm-1b4zKr2X5O-00rbRs: already got it
pop.c:274:num 15 uidl 0LzrkJ-1bHmsO2YlP-014yvr: already got it
pop.c:274:num 16 uidl 0MAUjy-1bXf5O3rtS-00BejO: already got it
pop.c:274:num 17 uidl 0Mamlq-1bfRwd3t6I-00KQCw: already got it
pop.c:274:num 18 uidl 0M1zfH-1b6awg2Qxf-00tyEj: already got it
pop.c:274:num 19 uidl 0LpwqJ-1as9Ff1xyh-00fjBz: already got it
pop.c:274:num 20 uidl 0M5dsS-1bBUXL0FZY-00xf6T: already got it
pop.c:274:num 21 uidl 0M2Y13-1b5gqI0tj3-00sKRL: already got it
pop.c:274:num 22 uidl 0Ld4YO-1aw6q52QLo-00iG1i: already got it
pop.c:274:num 23 uidl 0LzXDS-1bHVUJ2TZK-014isc: already got it
pop.c:274:num 24 uidl 0MZ75o-1bhVXq2uUu-00KyP8: already got it
pop.c:274:num 25 uidl 0LduLL-1axKCk0PkR-00ixj3: already got it
pop.c:276:num 26 uidl 0MKLW6-1bMK3f18ze-001gBz: unknown
pop.c:276:num 27 uidl 0LpxQd-1ardne0AA3-00fnMO: unknown
pop.c:276:num 28 uidl 0M66iM-1bCMJN2cgc-00yAX7: unknown
[15:48:38] POP3> LIST
[15:48:38] POP3< +OK
pop.c:346:retrieving 26 [0MKLW6-1bMK3f18ze-001gBz]
[15:48:38] POP3> RETR 26
[15:48:38] POP3< +OK
/home/edmund/.claws-mail/tmp/tmpfile.00000000: fclose: No space left on device
session.c:363:session (0x1b96000): closed
current dir: /home/edmund/.claws-mail/tempfolder
current dir: /home/edmund
current dir: /home/edmund/.claws-mail/tempfolder
mh.c:1090:searching missing folders...
mh.c:1132:scanning /home/edmund/.claws-mail/tempfolder ...
mh.c:1179:new folder 'processing-1' found.
mh.c:1132:scanning processing-1 ...
mh.c:1442:MH: forced mtime of processing-1 to 1467807544
mh.c:1179:new folder 'sent' found.
mh.c:1132:scanning sent ...
mh.c:1442:MH: forced mtime of sent to 1427997720
mh.c:1179:new folder 'queue' found.
mh.c:1132:scanning queue ...
mh.c:1442:MH: forced mtime of queue to 1427997720
mh.c:1179:new folder 'inbox' found.
mh.c:1132:scanning inbox ...
mh.c:1442:MH: forced mtime of inbox to 1427997720
mh.c:1179:new folder 'draft' found.
mh.c:1132:scanning draft ...
mh.c:1442:MH: forced mtime of draft to 1427997720
mh.c:1179:new folder 'processing-3' found.
mh.c:1132:scanning processing-3 ...
mh.c:1442:MH: forced mtime of processing-3 to 1468318575
mh.c:1179:new folder 'processing-5' found.
mh.c:1132:scanning processing-5 ...
mh.c:1442:MH: forced mtime of processing-5 to 1468318578
mh.c:1179:new folder 'processing' found.
mh.c:1132:scanning processing ...
mh.c:1442:MH: forced mtime of processing to 1427997745
mh.c:1179:new folder 'trash' found.
mh.c:1132:scanning trash ...
mh.c:1442:MH: forced mtime of trash to 1427997720
mh.c:1179:new folder 'processing-7' found.
mh.c:1132:scanning processing-7 ...
mh.c:1442:MH: forced mtime of processing-7 to 1468318584
mh.c:1442:MH: forced mtime of TEMP_FOLDER to 1427997720
folder.c:4283:*TMP* already created
/home/edmund/.claws-mail/tempfolder/processing-7
folder.c:2151:Scanning folder processing-7 for cache changes.
mh.c:294:mh_get_num_list(): Scanning processing-7 ...
current dir: /home/edmund/.claws-mail/tempfolder/processing-7
mh.c:1442:MH: forced mtime of processing-7 to 1468318584
msgcache.c:603:    Reading swapped message cache from
/home/edmund/.claws-mail/tempfolder/processing-7/.claws_cache...
msgcache.c:619:using Noop Converter
msgcache.c:791:done. (0 items read)
msgcache.c:792:Cache size: 0 messages, 0 bytes
msgcache.c:822:reading swapped mark file.
msgcache.c:916:reading swapped tags file.
folder.c:2708:TIMING folder_item_read_cache : 0s000ms
folder.c:2569:Total cache memory usage: 0
msgcache.c:275:TIMING msgcache_get_msg_list : 0s000ms
msgcache.c:275:TIMING msgcache_get_msg_list : 0s000ms
filtering.c:212:checking 0 messages

** (claws-mail:5093): WARNING **: [15:48:47] Can't write file.

alertpanel.c:254:Creating alert panel dialog...
alertpanel.c:213:called inc_lock (lock count 1)
alertpanel.c:223:called inc_unlock (lock count 0)
alertpanel.c:107:return value = 3
session.c:237:session (0x1b96000): destroyed
inc.c:1467:added timer = 6526

-- 
You are receiving this mail because:
You are the assignee for the bug.


From rol at witbe.net  Tue Jul 12 16:06:52 2016
From: rol at witbe.net (Paul Rolland (=?UTF-8?B?44Od44O844Or44O744Ot44Op44Oz?=))
Date: Tue, 12 Jul 2016 16:06:52 +0200
Subject: [Users] [Bug 3657] Downloading attachment failed. message
 :"can't write file"
In-Reply-To: <bug-3657-595-koMvrgMhP5@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
 <bug-3657-595-koMvrgMhP5@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <20160712160652.0228e149@riri.DEF.witbe.net>

Hello,

On Tue, 12 Jul 2016 13:49:35 +0000
noreply at thewildbeast.co.uk wrote:

> [15:48:38] POP3> RETR 26
> [15:48:38] POP3< +OK
> /home/edmund/.claws-mail/tmp/tmpfile.00000000: fclose: No space left on
> device session.c:363:session (0x1b96000): closed

Looks like the disk is full... or has no more free inodes...

df /home/edmund/.claws-mail/tmp
and
df -i /home/edmund/.claws-mail/tmp
should shed some light...

Paul

-- 

Paul Rolland                                E-Mail : rol(at)witbe.net
CTO - Witbe.net SA                          Tel. +33 (0)1 47 67 77 77
Les Collines de l'Arche                     Fax. +33 (0)1 47 67 77 99
F-92057 Paris La Defense                    RIPE : PR12-RIPE

LinkedIn : http://www.linkedin.com/in/paulrolland
Skype    : rollandpaul

"I worry about my child and the Internet all the time, even though she's
too young to have logged on yet. Here's what I worry about. I worry that 10
or 15 years from now, she will come to me and say 'Daddy, where were you
when they took freedom of the press away from the Internet?'"
--Mike Godwin, Electronic Frontier Foundation 


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160712/adb0dde4/attachment.sig>

From noreply at thewildbeast.co.uk  Tue Jul 12 16:17:28 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 14:17:28 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-bcOctGhTaz@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|REOPENED                    |RESOLVED
         Resolution|---                         |INVALID

--- Comment #5 from Paul <paul at claws-mail.org> ---
and therein was the answer:

/home/edmund/.claws-mail/tmp/tmpfile.00000000: fclose: No space left on device

-- 
You are receiving this mail because:
You are the assignee for the bug.


From shannf at netspace.net.au  Tue Jul 12 16:30:17 2016
From: shannf at netspace.net.au (Frank Shann)
Date: Wed, 13 Jul 2016 00:30:17 +1000
Subject: [Users] BSFilter does not work in Claws in Windows 7 64-bit
In-Reply-To: <mailman.1965.1468331376.25613.users@lists.claws-mail.org>
References: <mailman.1965.1468331376.25613.users@lists.claws-mail.org>
Message-ID: <20160713003017.000027a3@netspace.net.au>

Dear Adrej,

Thank you for your spectacularly rapid reply. I attach the log file. (Some
Windows users may need to show hidden folders to see
c:\users\yourusername\appdata)

I'd like to set two_line_vertical = 0 to show only one line in three column
layout, but I can't find clawsrc. Is it not available in Windows?

Frank


On Tue, 12 Jul 2016 15:49:36 +0200
users-request at lists.claws-mail.org wrote:

> Send Users mailing list submissions to
> 	users at lists.claws-mail.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.claws-mail.org/cgi-bin/mailman/listinfo/users
> or, via email, send a message with subject or body 'help' to
> 	users-request at lists.claws-mail.org
> 
> You can reach the person managing the list at
> 	users-owner at lists.claws-mail.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Users digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: BSFilter does not work in Claws in Windows 7 64-bit
>       (Andrej Kacian)
>    2. [Bug 3652] utils.c:4740:47: warning: ordered comparison of
>       pointer with integer zero [-Wextra] (noreply at thewildbeast.co.uk)
>    3. [Bug 3602] 3.13.2 can't build on OS X without change to
>       src/Makefile.am (noreply at thewildbeast.co.uk)
>    4. [Bug 3602] 3.13.2 can't build on OS X without change to
>       src/Makefile.am (noreply at thewildbeast.co.uk)
>    5. [Bug 3657] Downloading attachment failed. message :"can't
>       write file" (noreply at thewildbeast.co.uk)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Tue, 12 Jul 2016 12:12:21 +0200
> From: Andrej Kacian <andrej at kacian.sk>
> To: users at lists.claws-mail.org
> Subject: Re: [Users] BSFilter does not work in Claws in Windows 7
> 	64-bit
> Message-ID: <20160712121221.53656e58 at hiker>
> Content-Type: text/plain; charset=US-ASCII
> 
> On Tue, 12 Jul 2016 18:46:20 +1000
> Frank Shann <shannf at netspace.net.au> wrote:
> 
> > I have just installed Claws 3.13.2 in Windows 7 64-bit. It is an
> > excellent program, thank you. However, when I add BSFilter,
> > downloads time-out (even when I have filled out all the options).
> > "Error. The BSFilter plugin couldn't filter a message. The command
> > 'bsfilterw.exe' couldn't be run." bsfilterw.exe is in C:\Program Files
> > (x86)\Claws Mail. 
> > 
> > Can anyone help me to get BSFilter to run?  
> 
> Hi Frank,
> 
> I think I have found the bug, and am fixing it for the next release, but
> just to be sure that it's the same bug you're seeing, can you please run
> Claws Mail in debug mode?
> 
> You can do so by adding a --debug switch either to the desktop
> shortcut, or executing this from a text console (cmd.exe):
> 
> "c:\program files (x86)\claws mail\claws-mail.exe" --debug
> 
> Then, in Claws Mail, try one unsuccesful download like you described,
> exit Claws Mail, and send me resulting debug file, which should be in
> c:\users\yourusername\appdata\local\temp\claws-win32.log.
> 
> Thanks,

-------------- next part --------------
A non-text attachment was scrubbed...
Name: claws-win32.log
Type: application/octet-stream
Size: 22777 bytes
Desc: not available
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160713/8a69c968/attachment.obj>

From noreply at thewildbeast.co.uk  Tue Jul 12 16:40:46 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 14:40:46 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-HrHRPVloOT@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

--- Comment #6 from edmund <edmundzed at gmail.com> ---
(In reply to comment #5)
> and therein was the answer:
> 
> /home/edmund/.claws-mail/tmp/tmpfile.00000000: fclose: No space left on
> device

I saw that passing but why? 
I thought that the OS ( Mint ) should take care of that, I got plenty disk
space left. Is there a user friendly tool to see what is happening and why is
Mint not
managing this correctly?

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 16:43:22 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 14:43:22 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-4VSFAYMsPW@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

--- Comment #7 from Paul <paul at claws-mail.org> ---
Probably your /home parition is smaller than you want it to be. Try:

df -h

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 17:07:10 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 15:07:10 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-M2WenFyp8r@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

--- Comment #8 from edmund <edmundzed at gmail.com> ---
(In reply to comment #7)
> Probably your /home parition is smaller than you want it to be. Try:
> 
> df -h

Indeed not too much space left but I would think more then enough for a 40 MB
attachment. 
In the mean time I deleted some stuff now it looks like this.

 $ df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            3,9G  4,0K  3,9G   1% /dev
tmpfs           791M  1,4M  790M   1% /run
/dev/sda2        48G  7,1G   39G  16% /
none            4,0K     0  4,0K   0% /sys/fs/cgroup
none            5,0M     0  5,0M   0% /run/lock
none            3,9G  328K  3,9G   1% /run/shm
none            100M   20K  100M   1% /run/user
/dev/sda3       206G  181G   14G  93% /home

Don't know yet if this cured the problem because I deleted the file via the
webmail on the server.

Addition, I just checked and it is working now.
Big THANK YOU.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 17:24:35 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 15:24:35 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-PXElSCFu5E@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

--- Comment #9 from Michael Rasmussen <mir at datanom.net> ---
(In reply to comment #8)
> /dev/sda3       206G  181G   14G  93% /home
> 
What does df -i /home show?

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 12 17:39:41 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 15:39:41 +0000
Subject: [Users] [Bug 3660] New: SSL Cert change shown on previously
 accepted certificates.
Message-ID: <bug-3660-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3660

            Bug ID: 3660
           Summary: SSL Cert change shown on previously accepted
                    certificates.
    Classification: Unclassified
           Product: Claws Mail
           Version: 3.13.2
          Hardware: PC
                OS: Linux
            Status: NEW
          Severity: normal
          Priority: P3
         Component: Folders/IMAP
          Assignee: users at lists.claws-mail.org
          Reporter: nick at primis.org

Google Likes changing their SSL Certs almost hourly. They normally switch
between 2 or three, and every time the cert changes, Claws lets me know. Claws
should only be notifying me if it's a previously unknown cert, not for
switching between multiple known ones.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From andrej at kacian.sk  Tue Jul 12 17:46:38 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Tue, 12 Jul 2016 17:46:38 +0200
Subject: [Users] BSFilter does not work in Claws in Windows 7 64-bit
In-Reply-To: <20160713003017.000027a3@netspace.net.au>
References: <mailman.1965.1468331376.25613.users@lists.claws-mail.org>
 <20160713003017.000027a3@netspace.net.au>
Message-ID: <20160712174638.0380e1d8@penny>

On Wed, 13 Jul 2016 00:30:17 +1000
Frank Shann <shannf at netspace.net.au> wrote:

> Thank you for your spectacularly rapid reply. I attach the log file. (Some
> Windows users may need to show hidden folders to see
> c:\users\yourusername\appdata)

Thank you for the log. It seems like I do indeed see the same bug. The
problem is that the plugin is calling bsfilterw.exe without a full
path, and since the folder where the program is is not in user PATH
variable, this fails.

There is also another problem with bsfilterw.exe program itself - it
doesn't follow standard Windows rules about where to look for DLL
files, so I will have to change the plugin code to call the program in
a certain way (use full path, set proper working dir beforehand). I
should have it fixed in time for next release, which is due in a few
weeks.

> I'd like to set two_line_vertical = 0 to show only one line in three column
> layout, but I can't find clawsrc. Is it not available in Windows?

Of course it is, you can find it at
C:\Users\Frank\AppData\Roaming\Claws-mail\clawsrc (beginning of your
debug log also shows this path).

Regards,
-- 
Andrej


From noreply at thewildbeast.co.uk  Tue Jul 12 17:55:19 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 15:55:19 +0000
Subject: [Users] [Bug 3660] SSL Cert change shown on previously accepted
 certificates.
In-Reply-To: <bug-3660-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3660-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3660-595-nMbXgrI6jj@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3660

Andrej Kacian <andrej at kacian.sk> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |INVALID

--- Comment #1 from Andrej Kacian <andrej at kacian.sk> ---
See "unsafe_ssl_certs" hidden preference at
http://www.claws-mail.org/manual/claws-mail-manual.html#adv_hidden

-- 
You are receiving this mail because:
You are the assignee for the bug.


From rol at witbe.net  Tue Jul 12 18:00:28 2016
From: rol at witbe.net (Paul Rolland (=?UTF-8?B?44Od44O844Or44O744Ot44Op44Oz?=))
Date: Tue, 12 Jul 2016 18:00:28 +0200
Subject: [Users] [Bug 3657] Downloading attachment failed. message
 :"can't write file"
In-Reply-To: <bug-3657-595-PXElSCFu5E@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
 <bug-3657-595-PXElSCFu5E@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <20160712180028.6ef37aa6@riri.DEF.witbe.net>

Hello,

On Tue, 12 Jul 2016 15:24:35 +0000
noreply at thewildbeast.co.uk wrote:

> http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657
> 
> --- Comment #9 from Michael Rasmussen <mir at datanom.net> ---
> (In reply to comment #8)
> > /dev/sda3       206G  181G   14G  93% /home
> >   
> What does df -i /home show?

The number of free inodes. Depending on the type of filesystems you are
using, and the settings used when creating it, you can be in a situation
where the OS reports "No space left on device" because it can't create the
file due to a lack of inode, even when you have plenty of free space.

Best,
Paul

-- 

Paul Rolland                                E-Mail : rol(at)witbe.net
CTO - Witbe.net SA                          Tel. +33 (0)1 47 67 77 77
Les Collines de l'Arche                     Fax. +33 (0)1 47 67 77 99
F-92057 Paris La Defense                    RIPE : PR12-RIPE

LinkedIn : http://www.linkedin.com/in/paulrolland
Skype    : rollandpaul

"I worry about my child and the Internet all the time, even though she's
too young to have logged on yet. Here's what I worry about. I worry that 10
or 15 years from now, she will come to me and say 'Daddy, where were you
when they took freedom of the press away from the Internet?'"
--Mike Godwin, Electronic Frontier Foundation 


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160712/a1cad820/attachment.sig>

From mir at miras.org  Tue Jul 12 18:06:28 2016
From: mir at miras.org (Michael Rasmussen)
Date: Tue, 12 Jul 2016 18:06:28 +0200
Subject: [Users] [Bug 3657] Downloading attachment failed. message
 :"can't write file"
In-Reply-To: <20160712180028.6ef37aa6@riri.DEF.witbe.net>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
 <bug-3657-595-PXElSCFu5E@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
 <20160712180028.6ef37aa6@riri.DEF.witbe.net>
Message-ID: <20160712180628.32d91647@sleipner.datanom.net>

On Tue, 12 Jul 2016 18:00:28 +0200
"Paul Rolland (ポール・ロラン)" <rol at witbe.net> wrote:

> 
> The number of free inodes. Depending on the type of filesystems you are
> using, and the settings used when creating it, you can be in a situation
> where the OS reports "No space left on device" because it can't create the
> file due to a lack of inode, even when you have plenty of free space.
> 
I was perfectly aware of that;-) I was trying to get OP to show the
output as I expect the number will show that his problem is not
free space but instead is number of free inodes.

-- 
Hilsen/Regards
Michael Rasmussen

Get my public GnuPG keys:
michael <at> rasmussen <dot> cc
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD3C9A00E
mir <at> datanom <dot> net
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE501F51C
mir <at> miras <dot> org
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE3E80917
--------------------------------------------------------------
/usr/games/fortune -es says:
Go directly to jail.  Do not pass Go, do not collect $200.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160712/bc82d9bc/attachment.sig>

From shannf at netspace.net.au  Tue Jul 12 19:06:49 2016
From: shannf at netspace.net.au (Frank Shann)
Date: Wed, 13 Jul 2016 03:06:49 +1000
Subject: [Users] Bsfilter does not work in Claws in Windows 7  64-bit
In-Reply-To: <mailman.1970.1468339597.25613.users@lists.claws-mail.org>
References: <mailman.1970.1468339597.25613.users@lists.claws-mail.org>
Message-ID: <20160713030649.0000096e@netspace.net.au>

Dear Andrej,

Thank you for telling me how to find clawsrc.

Thanks also for working on the bsfilterw.exe problem. Until the new version
is ready, would an effective work-around be for me to add "C:\Program Files
(x86)\Claws Mail" to my PATH?

Frank


On Tue, 12 Jul 2016 18:06:37 +0200
users-request at lists.claws-mail.org wrote:

> Send Users mailing list submissions to
> 	users at lists.claws-mail.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.claws-mail.org/cgi-bin/mailman/listinfo/users
> or, via email, send a message with subject or body 'help' to
> 	users-request at lists.claws-mail.org
> 
> You can reach the person managing the list at
> 	users-owner at lists.claws-mail.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Users digest..."
> 
> 
> Today's Topics:
> 
>    1. [Bug 3657] Downloading attachment failed. message :"can't
>       write file" (noreply at thewildbeast.co.uk)
>    2. [Bug 3657] Downloading attachment failed. message :"can't
>       write file" (noreply at thewildbeast.co.uk)
>    3. [Bug 3657] Downloading attachment failed. message :"can't
>       write file" (noreply at thewildbeast.co.uk)
>    4. [Bug 3657] Downloading attachment failed. message :"can't
>       write file" (noreply at thewildbeast.co.uk)
>    5. [Bug 3660] New: SSL Cert change shown on previously accepted
>       certificates. (noreply at thewildbeast.co.uk)
>    6. Re: BSFilter does not work in Claws in Windows 7 64-bit
>       (Andrej Kacian)
>    7. [Bug 3660] SSL Cert change shown on previously accepted
>       certificates. (noreply at thewildbeast.co.uk)
>    8. Re: [Bug 3657] Downloading attachment failed. message :"can't
>       write file" (Paul Rolland (=?UTF-8?B?44Od44O844Or44O744Ot44Op44Oz?=))
>    9. Re: [Bug 3657] Downloading attachment failed. message :"can't
>       write file" (Michael Rasmussen)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Tue, 12 Jul 2016 14:40:46 +0000
> From: noreply at thewildbeast.co.uk
> To: users at lists.claws-mail.org
> Subject: [Users] [Bug 3657] Downloading attachment failed. message
> 	:"can't write file"
> Message-ID:
> 	<bug-3657-595-HrHRPVloOT at http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
> 	
> Content-Type: text/plain; charset="UTF-8"
> 
> http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657
> 
> --- Comment #6 from edmund <edmundzed at gmail.com> ---
> (In reply to comment #5)
> > and therein was the answer:
> > 
> > /home/edmund/.claws-mail/tmp/tmpfile.00000000: fclose: No space left on
> > device  
> 
> I saw that passing but why? 
> I thought that the OS ( Mint ) should take care of that, I got plenty disk
> space left. Is there a user friendly tool to see what is happening and why is
> Mint not
> managing this correctly?
> 




From anmeyer at mailbox.org  Tue Jul 12 22:33:05 2016
From: anmeyer at mailbox.org (Andreas Meyer)
Date: Tue, 12 Jul 2016 22:33:05 +0200
Subject: [Users] shortcut for action
Message-ID: <20160712223305.4d32494a@workstation.bitcorner.intern>

Hi everybody!

I remember there was the possibility to define a shortcut like
ALT+G or something for an action like tail /home/andreas/.mysig >

Am I wrong or how do I create a shortcut like this?

Kind regards

  Andreas


From shannf at netspace.net.au  Wed Jul 13 05:45:13 2016
From: shannf at netspace.net.au (Frank Shann)
Date: Wed, 13 Jul 2016 13:45:13 +1000
Subject: [Users] Claws Windows 7 times out
Message-ID: <6084d816-a3f3-bd36-f9fc-f9a15b79d6ce@netspace.net.au>

My apologies for bothering you again. Today Claws 3.13.2 in Windows 7 
64-bit logged into my pop3 ISP email account, but then timed out without 
downloading the messages. bsfilter is not installed. I attach the claws 
log and the debug log. Thunderbird downloaded the three messages from 
the server without problems (Claws failed to download, then Thunderbird 
downloaded, then Claws failed again). Using a timeout of 120 seconds 
rather than 60 seconds makes no difference. Claws downloaded from this 
server yesterday with the current account settings (which are the same 
as those in Thunderbird). Thunderbird was not running when Claws failed 
to download.

Frank

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160713/108ab91b/attachment.html>
-------------- next part --------------
[13:20:45] * message: Account 'shannf at pop3.netspace.net.au': Connecting to POP3 server: pop3.netspace.net.au:110...
[13:20:45] POP3< +OK Netspace Mail Ready.
[13:20:45] POP3> USER shannf
[13:20:45] POP3< +OK
[13:20:45] POP3> PASS ********
[13:20:45] POP3< +OK Logged in.
[13:20:45] POP3> STAT
[13:20:45] POP3< +OK 34 2076775
[13:20:45] POP3> UIDL
[13:20:45] POP3< +OK
[13:20:45] POP3> LIST
[13:20:45] POP3< +OK 34 messages:
[13:20:45] POP3> RETR 31
[13:20:45] POP3< +OK 13810 octets
[13:21:45] ** warning: Session timed out. You may be able to recover by increasing the timeout value in Preferences/Other/Miscellaneous.
-------------- next part --------------
claws.c:102:Starting Claws Mail version Claws Mail 3.13.2
main.c:769:runtime GTK+ 2.24.28 / GLib 2.45.2
main.c:777:buildtime GTK+ 2.24.28 / GLib 2.45.2
main.c:786:Compiled-in features:
main.c:797: Enchant
main.c:803: GnuTLS
main.c:809: IPv6
main.c:815: iconv
main.c:827: LDAP
main.c:833: libetpan 1.6
utils.c:1804:using default rc_dir C:\Users\Frank\AppData\Roaming\Claws-mail
prefs_gtk.c:1046:new file 'C:\Users\Frank\AppData\Roaming\Claws-mail\clawsrc'
prefs_gtk.c:1005:new section 'Common'
prefs_gtk.c:1005:new section 'CommonWin32'
prefs_gtk.c:1005:new section 'GPG'
prefs_gtk.c:1005:new section 'PluginsWin32_Common'
prefs_gtk.c:1005:new section 'PluginsWin32_GTK2'
prefs_gtk.c:1005:new section 'fancy'
prefs_gtk.c:1005:new section 'AttRemover'
prefs_gtk.c:1005:new section 'Bsfilter'
prefs_gtk.c:1005:new section 'AddressKeeper'
prefs_gtk.c:1005:new section 'AttachWarner'
prefs_gtk.c:1005:new section 'Fetchinfo'
prefs_gtk.c:1046:new file 'C:\Users\Frank\AppData\Roaming\Claws-mail\folderitemrc'
prefs_gtk.c:984:cache: C:\Users\Frank\AppData\Roaming\Claws-mail\folderitemrc: No such file or directory
prefs_gtk.c:1084:destroying cache
current dir: C:\Users\Frank\AppData\Roaming
prefs.c:297:Found [PluginsWin32_Common]
current dir: C:\Users\Frank\AppData\Roaming\Claws-mail
current dir: C:\Users\Frank\AppData\Roaming
folder.c:124:registering folder class mh
folder.c:124:registering folder class imap
folder.c:124:registering folder class news
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Common]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [CommonWin32]
prefs_gtk.c:147:Finished reading configuration.
prefs_themes.c:369:Creating preferences for themes...
stock_pixmap.c:501:skipping theme scan, dir C:\Users\Frank\AppData\Roaming\Claws-mail\themes could not be opened: Error opening directory 'C:\Users\Frank\AppData\Roaming\Claws-mail\themes': No such file or directory (4)
stock_pixmap.c:501:skipping theme scan, dir C:\Program Files (x86)\Claws Mail\share\claws-mail\themes could not be opened: Error opening directory 'C:\Program Files (x86)\Claws Mail\share\claws-mail\themes': No such file or directory (4)
prefs_actions.c:443:Reading actions configurations...
prefs_display_header.c:429:Reading configuration for displaying headers...
addressbook.c:4214:Reading address index...
addressbook.c:4263:done.
mainwindow.c:1451:Creating main window...
toolbar.c:724:read Toolbar Configuration from toolbar_main.xml
folderview.c:587:Creating folder view...
folderview.c:419:creating tree...
hooks.c:71:registed new hook for 'folder_update' as id 1
hooks.c:71:registed new hook for 'folder_item_update' as id 1
summaryview.c:532:Creating summary view...
hooks.c:71:registed new hook for 'msginfo_update' as id 1
hooks.c:71:registed new hook for 'folder_item_update' as id 2
hooks.c:71:registed new hook for 'folder_update' as id 2
messageview.c:405:Creating message view...
headerview.c:72:Creating header view...
noticeview.c:73:Creating notice view...
mimeview.c:269:Creating MIME view...
noticeview.c:73:Creating notice view...
textview.c:287:Creating text view...
hooks.c:71:registed new hook for 'msginfo_update' as id 2
logwindow.c:88:Creating log window...
hooks.c:71:registed new hook for 'log_append_text' as id 1
logwindow.c:88:Creating log window...
hooks.c:71:registed new hook for 'debug_append_text' as id 1
message: filtering log disabled
mainwindow.c:2113:done.
mainwindow.c:3651:Setting widgets... mainwindow.c:3856:done.
summaryview.c:1248:called inc_lock (lock count 1)
summaryview.c:1321:empty folder (00000000 (null) 00000000 0)

summaryview.c:1333:called inc_unlock (lock count 0)
summaryview.c:1334:TIMING : 0s000ms
hooks.c:71:registed new hook for 'sslcert_ask' as id 1
hooks.c:71:registed new hook for 'progressindicator_hooklist' as id 1
hooks.c:71:registed new hook for 'sslcert_get_client_cert' as id 1
hooks.c:71:registed new hook for 'sslcert_get_password' as id 1
account.c:200:Reading all config for each account...
account.c:215:Found label: Account: 1
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_customheader.c:332:Reading custom header configuration...
folderview.c:332:setting titles...
folderview.c:765:called inc_lock (lock count 1)
folderview.c:766:Setting folder info...
folderview.c:792:called inc_unlock (lock count 0)
summaryview.c:1248:called inc_lock (lock count 1)
summaryview.c:1321:empty folder (00000000 (null) 00000000 0)

summaryview.c:1333:called inc_unlock (lock count 0)
summaryview.c:1334:TIMING : 0s000ms
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
folderview.c:765:called inc_lock (lock count 1)
folderview.c:766:Setting folder info...
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Mail\queue\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (0 items read)
msgcache.c:794:Cache size: 0 messages, 0 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 0
msgcache.c:277:TIMING : 0s000ms
folderview.c:792:called inc_unlock (lock count 0)
folderview.c:765:called inc_lock (lock count 1)
folderview.c:766:Setting folder info...
msgcache.c:277:TIMING : 0s000ms
folderview.c:792:called inc_unlock (lock count 0)
hooks.c:71:registed new hook for 'avatar_image_render' as id 1
prefs.c:297:Found [PluginsWin32_GTK2]
plugin.c:449:trying to load `pgpcore.dll'
plugin.c:386:trying to load pgpcore.dll in default plugin directory C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [GPG]
prefs_gtk.c:147:Finished reading configuration.
prefs_gpg.c:598:Can't disable gpg agent (no GPG_AGENT_INFO)
sgpgme.c:655:setting gpgme CTYPE locale
sgpgme.c:662:setting gpgme CTYPE locale to: en_US
sgpgme.c:669:setting gpgme locale to UTF8: en_US.UTF-8
sgpgme.c:672:done
sgpgme.c:680:setting gpgme MESSAGES locale
sgpgme.c:687:setting gpgme MESSAGES locale to: en_US
sgpgme.c:693:setting gpgme locale to UTF8: en_US.UTF-8
sgpgme.c:697:done
sgpgme.c:706:GpgME Protocol: Spawn
Version: 1.0 (req 1.0)
Executable: /nonexistent
prefs_gpg.c:495:Saving GPG config
prefs.c:310:Found [GPG]
C:\Users\Frank\AppData\Roaming\Claws-mail\clawsrc: hooks.c:71:registed new hook for 'address_completion_build_address_list_hooklist' as id 1
autocompletion.c:136:PGP address autocompletion hook registered
plugin.c:523:Plugin PGP/Core (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll: 0s000ms
plugin.c:271:adding C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime to C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll rdeps
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime'
plugin.c:368:plugin licence check passed: GPL3+ found
plugin.c:523:Plugin PGP/MIME (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime: 0s000ms
plugin.c:271:adding C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline to C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll rdeps
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline'
plugin.c:368:plugin licence check passed: GPL3+ found
plugin.c:523:Plugin PGP/inline (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\address_keeper.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
hooks.c:71:registed new hook for 'compose_check_before_send' as id 1
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [AddressKeeper]
prefs_gtk.c:147:Finished reading configuration.
address_keeper.c:258:Address Keeper plugin loaded
plugin.c:523:Plugin Address Keeper (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\address_keeper.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\address_keeper.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\att_remover.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [AttRemover]
prefs_gtk.c:147:Finished reading configuration.
plugin.c:523:Plugin AttRemover (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\att_remover.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\att_remover.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\attachwarner.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
hooks.c:71:registed new hook for 'compose_check_before_send' as id 2
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [AttachWarner]
prefs_gtk.c:147:Finished reading configuration.
attachwarner.c:262:Attachment warner plugin loaded
plugin.c:523:Plugin Attach warner (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\attachwarner.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\attachwarner.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fetchinfo.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
hooks.c:71:registed new hook for 'mail_receive_hooklist' as id 1
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Fetchinfo]
prefs_gtk.c:147:Finished reading configuration.
fetchinfo_plugin_gtk.c:193:Fetchinfo GTK plugin loaded
fetchinfo_plugin.c:184:Fetchinfo plugin loaded
plugin.c:523:Plugin Fetchinfo (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fetchinfo.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fetchinfo.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fancy.dll'
plugin.c:368:plugin licence check passed: GPL3 found
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [fancy]
prefs_gtk.c:147:Finished reading configuration.
plugin.c:523:Plugin Fancy HTML Viewer (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fancy.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fancy.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\tnef_parse.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
plugin.c:523:Plugin TNEF Parser (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\tnef_parse.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\tnef_parse.dll: 0s000ms
prefs_gtk.c:1081:no cache
main.c:1560:TIMING startup: 0s000ms
main.c:2092:exiting

From noreply at thewildbeast.co.uk  Wed Jul 13 12:54:11 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Wed, 13 Jul 2016 10:54:11 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-aLaBvi4Y4J@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

--- Comment #10 from edmund <edmundzed at gmail.com> ---
(In reply to comment #9)
> (In reply to comment #8)
> > /dev/sda3       206G  181G   14G  93% /home
> > 
> What does df -i /home show?

$ df -i
Filesystem       Inodes  IUsed    IFree IUse% Mounted on
udev            1007973    518  1007455    1% /dev
tmpfs           1011867    569  1011298    1% /run
/dev/sda2       3203072 305756  2897316   10% /
none            1011867      2  1011865    1% /sys/fs/cgroup
none            1011867      3  1011864    1% /run/lock
none            1011867      6  1011861    1% /run/shm
none            1011867     13  1011854    1% /run/user
/dev/sda3      13664256  72170 13592086    1% /home

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Wed Jul 13 13:36:18 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Wed, 13 Jul 2016 11:36:18 +0000
Subject: [Users] [Bug 3657] Downloading attachment failed. message :"can't
 write file"
In-Reply-To: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3657-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3657-595-DVKFa4lt4x@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3657

--- Comment #11 from Ricardo Mones <mones at users.sourceforge.net> ---
(In reply to comment #8)
[…]
> Indeed not too much space left but I would think more then enough for a 40
> MB attachment. 
> In the mean time I deleted some stuff now it looks like this.
> 
>  $ df -h
> Filesystem      Size  Used Avail Use% Mounted on
[…]
> /dev/sda3       206G  181G   14G  93% /home
> 
> Don't know yet if this cured the problem because I deleted the file via the
> webmail on the server.

You now have 206 > 195 (181 + 14), and the missing space (11G) roughly matches
the 5% of blocks reserved for root user, which is the default for ext
formatting tools.

This space cannot be used by non-root users, so it could be you had hit this
limit.

See manpage for tune2fs tool on how to change this value to 0 and make the full
capacity of the partition available for non-root users.

-- 
You are receiving this mail because:
You are the assignee for the bug.

From noreply at thewildbeast.co.uk  Wed Jul 13 19:55:44 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Wed, 13 Jul 2016 17:55:44 +0000
Subject: [Users] =?utf-8?q?=5BBug_3661=5D_New=3A__=E2=80=9CReplace_signatu?=
 =?utf-8?q?re=E2=80=9D_fails_after_using_external_editor?=
Message-ID: <bug-3661-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3661

            Bug ID: 3661
           Summary: “Replace signature” fails after using external editor
    Classification: Unclassified
           Product: Claws Mail
           Version: GIT
          Hardware: PC
                OS: Linux
            Status: NEW
          Severity: normal
          Priority: P3
         Component: UI/Compose Window
          Assignee: users at lists.claws-mail.org
          Reporter: mones at users.sourceforge.net

Requires:
- An external text editor (I'm using “gvim -f --socketid %w %s” in text editor
entry)
- A Claws Mail account with a configured signature

Steps to reproduce:
- Enable editing with a external editor
- Reply to a message or compose a new one (account signature is correctly
added)
- End editing with external editor (leave signature untouched)
- Mail body is now in compose window
- Try now “Message/Replace signature” menu option in compose window

Result:
- A new signature is added below current, message has now two signatures.

Expected:
- Existing signature is replaced.

-- 
You are receiving this mail because:
You are the assignee for the bug.

From andrej at kacian.sk  Wed Jul 13 20:29:21 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Wed, 13 Jul 2016 20:29:21 +0200
Subject: [Users] Bsfilter does not work in Claws in Windows 7  64-bit
In-Reply-To: <20160713030649.0000096e@netspace.net.au>
References: <mailman.1970.1468339597.25613.users@lists.claws-mail.org>
 <20160713030649.0000096e@netspace.net.au>
Message-ID: <20160713202921.0ee284e2@penny>

On Wed, 13 Jul 2016 03:06:49 +1000
Frank Shann <shannf at netspace.net.au> wrote:

> Thanks also for working on the bsfilterw.exe problem. Until the new version
> is ready, would an effective work-around be for me to add "C:\Program Files
> (x86)\Claws Mail" to my PATH?

Probably not, but it won't hurt to try.

Regards,
-- 
Andrej


From andrej at kacian.sk  Wed Jul 13 20:32:34 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Wed, 13 Jul 2016 20:32:34 +0200
Subject: [Users] Claws Windows 7 times out
In-Reply-To: <6084d816-a3f3-bd36-f9fc-f9a15b79d6ce@netspace.net.au>
References: <6084d816-a3f3-bd36-f9fc-f9a15b79d6ce@netspace.net.au>
Message-ID: <20160713203234.0640af6d@penny>

On Wed, 13 Jul 2016 13:45:13 +1000
Frank Shann <shannf at netspace.net.au> wrote:

> My apologies for bothering you again. Today Claws 3.13.2 in Windows 7 
> 64-bit logged into my pop3 ISP email account, but then timed out without 
> downloading the messages. bsfilter is not installed. I attach the claws 
> log and the debug log. Thunderbird downloaded the three messages from 
> the server without problems (Claws failed to download, then Thunderbird 
> downloaded, then Claws failed again). Using a timeout of 120 seconds 
> rather than 60 seconds makes no difference. Claws downloaded from this 
> server yesterday with the current account settings (which are the same 
> as those in Thunderbird). Thunderbird was not running when Claws failed 
> to download.

The debug log seems to be from a different run of Claws Mail, one where
you just started the program and exited. There doesn't seem to be any
mention of a POP3 connection.

Regards,
-- 
Andrej


From noreply at thewildbeast.co.uk  Tue Jul 12 07:44:18 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 12 Jul 2016 05:44:18 +0000
Subject: [Users] [Bug 3658] Passphrase ignored during keypair generation
	with gpg2
In-Reply-To: <bug-3658-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3658-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3658-595-ubvYuOuHdb@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3658

--- Comment #1 from users at lists.claws-mail.org ---
Changes related to this bug have been committed.
Please check latest Git and update the bug accordingly.
You can also get the patch from:
http://git.claws-mail.org/

++ ChangeLog    2016-07-13 21:53:02.855122722 +0200
http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=55c93fe55aa02038aaae215bbb5352ae5ba79a3a
Merge: d9012f8 5e02bd9
Author: Colin Leroy <colin at colino.net>
Date:   Wed Jul 13 21:53:02 2016 +0200

    Merge branch 'master' of file:///home/git/claws

http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=5e02bd982ab0505bd75ffb17718e7750d7e2865f
Author: Andrej Kacian <ticho at claws-mail.org>
Date:   Wed Jul 13 21:50:52 2016 +0200

    When generating a PGP keypair, only ask for passphrase with gpg1.

    Also erase all copies of an entered passphrase from memory
    when done. Closes bug #3658.

-- 
You are receiving this mail because:
You are the assignee for the bug.
You are watching the reporter of the bug.


From noreply at thewildbeast.co.uk  Wed Jul 13 22:02:54 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Wed, 13 Jul 2016 20:02:54 +0000
Subject: [Users] [Bug 3658] Passphrase ignored during keypair generation
	with gpg2
In-Reply-To: <bug-3658-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3658-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3658-595-DEjbJM1OHI@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3658

Andrej Kacian <andrej at kacian.sk> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

-- 
You are receiving this mail because:
You are the assignee for the bug.
You are watching the reporter of the bug.


From peter_s_d at fastmail.com.au  Thu Jul 14 06:05:22 2016
From: peter_s_d at fastmail.com.au (blind Pete)
Date: Thu, 14 Jul 2016 14:05:22 +1000
Subject: [Users] [Bug 3660] SSL Cert change shown on previously accepted
 certificates.
In-Reply-To: <bug-3660-595-nMbXgrI6jj@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3660-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
 <bug-3660-595-nMbXgrI6jj@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <20160714140522.532f0295@PPlive>

On Tue, 12 Jul 2016 15:55:19 +0000
noreply at thewildbeast.co.uk wrote:

> http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3660
> 
> Andrej Kacian <andrej at kacian.sk> changed:
> 
>            What    |Removed                     |Added
> ----------------------------------------------------------------------------
>              Status|NEW                         |RESOLVED
>          Resolution|---                         |INVALID
> 
> --- Comment #1 from Andrej Kacian <andrej at kacian.sk> ---
> See "unsafe_ssl_certs" hidden preference at
> http://www.claws-mail.org/manual/claws-mail-manual.html#adv_hidden
> 

I am not the original poster, and am an amateur with regard to SSL
certificates.  Please feel free to shout at me - if you think that I
deserve it.  

First, I am guessing that the mailing list is the place for this,
rather than adding to the bug report.  

You have lost me.  There might be two different problems confusing
things.  Problem one is that there are such things as SSL certificates
for URLs that have wild cards in them.  AIUI these are dangerous and
facilitate phishing scams.  Problem two is that there can be multiple
valid certificates for a single non-wildcarded URL, either issued by
different authorities or even the same authority.  To the best of my
understanding this situation offers no security risk, just an
inconvenience. 

Are you referring to, 

    skip_ssl_cert_check 

    Disables the verification of SSL certificates when set 
    to '1'.  Default value is '0'.

or to, 

    unsafe_ssl_certs

    Allows Claws Mail to remember multiple SSL certificates 
    for a given server/port when set to '1'. This is disabled 
    by default ('0'). 

The name "unsafe_ssl_certs" suggests that it refers to SSL certs for
wildcarded URLs (problem one), but the text describes problem two,
which in my limited understanding is a non-problem.  

Can anyone please offer enlightenment? 

-- 
testing
bP


From noreply at thewildbeast.co.uk  Thu Jul 14 08:56:59 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 14 Jul 2016 06:56:59 +0000
Subject: [Users] [Bug 3660] SSL Cert change shown on previously accepted
 certificates.
In-Reply-To: <bug-3660-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3660-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3660-595-ueK1YtCiP6@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3660

--- Comment #2 from Paul <paul at claws-mail.org> ---
There is also an option in your account preferences, on the SSL page:
"Automatically accept valid SSL certificates". Use this.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From claws at thewildbeast.co.uk  Thu Jul 14 09:03:06 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Thu, 14 Jul 2016 08:03:06 +0100
Subject: [Users] [Bug 3660] SSL Cert change shown on previously accepted
 certificates.
In-Reply-To: <20160714140522.532f0295@PPlive>
References: <bug-3660-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
 <bug-3660-595-nMbXgrI6jj@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
 <20160714140522.532f0295@PPlive>
Message-ID: <20160714080306.41c292d6@kujata>

On Thu, 14 Jul 2016 14:05:22 +1000
blind Pete <peter_s_d at fastmail.com.au> wrote: 

> Are you referring to, 
> 
>     skip_ssl_cert_check 
> 
>     Disables the verification of SSL certificates when set 
>     to '1'.  Default value is '0'.
> 
> or to, 
> 
>     unsafe_ssl_certs
> 
>     Allows Claws Mail to remember multiple SSL certificates 
>     for a given server/port when set to '1'. This is disabled 
>     by default ('0'). 

Clearly it was the latter which was being referred to - it is named
explicitly.


> The name "unsafe_ssl_certs" suggests that it refers to SSL certs for
> wildcarded URLs (problem one), but the text describes problem two,
> which in my limited understanding is a non-problem.  

As the name alone cannot give a full explanation, the text is added
to describe the function of the option. Whatever an option name
leads you to believe, there is no need to doubt the accompanying
text.  

with regards

Paul


From noreply at thewildbeast.co.uk  Thu Jul 14 10:17:47 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 14 Jul 2016 08:17:47 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-fGrw2ck66w@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

Ricardo Mones <mones at users.sourceforge.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
   Attachment #1666|0                           |1
        is obsolete|                            |
   Attachment #1667|                            |applied-
              Flags|                            |

--- Comment #7 from Ricardo Mones <mones at users.sourceforge.net> ---
Created attachment 1667
  -->
http://www.thewildbeast.co.uk/claws-mail/bugzilla/attachment.cgi?id=1667&action=edit
Possible fix for this and Debian bug #712758 (v2)

Re-implementation of fix using the existing preference but changing its meaning
to seconds.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Thu Jul 14 11:28:30 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 14 Jul 2016 09:28:30 +0000
Subject: [Users] [Bug 3662] New: support configuration versioning
Message-ID: <bug-3662-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3662

            Bug ID: 3662
           Summary: support configuration versioning
    Classification: Unclassified
           Product: Claws Mail
           Version: GIT
          Hardware: All
                OS: All
            Status: NEW
          Severity: enhancement
          Priority: P3
         Component: Other
          Assignee: users at lists.claws-mail.org
          Reporter: mones at users.sourceforge.net

Current configuration is not versioned, hence migration of features or fixing
bugs in existing ones becomes cumbersome and requires ad hoc solutions.

With configuration versioning in place this becomes as simpler as checking
current config version against the required one.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Thu Jul 14 12:00:08 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 14 Jul 2016 10:00:08 -0000
Subject: [Users] [Bug 3573] Out of bounds read in macro LBREAK_IF_REQUIRED
 in codeconv.c
In-Reply-To: <bug-3573-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3573-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3573-595-pAUIRtVA61@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3573

--- Comment #2 from users at lists.claws-mail.org ---
Changes related to this bug have been committed.
Please check latest Git and update the bug accordingly.
You can also get the patch from:
http://git.claws-mail.org/

++ ChangeLog    2016-07-14 12:00:03.138710625 +0200
http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=a04ad79d847a1b30f9f8b397b8f250b9b846c247
Merge: 55c93fe 74b625c
Author: Colin Leroy <colin at colino.net>
Date:   Thu Jul 14 12:00:02 2016 +0200

    Merge branch 'master' of file:///home/git/claws

http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=74b625c53e38ed53a585fe43df23f12d50d447a6
Author: Ricardo Mones <ricardo at mones.org>
Date:   Thu Jul 14 11:59:22 2016 +0200

    Update lists of authors

http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=4bee63af358db61367f987ef1b3dbad5070e1cad
Author: Ricardo Mones <ricardo at mones.org>
Date:   Thu Jul 14 11:52:43 2016 +0200

    Fix bug #3573: Out of bounds read in macro LBREAK_IF_REQUIRED

    Thanks Hanno Boeck for the patch!

-- 
You are receiving this mail because:
You are the assignee for the bug.


From shannf at netspace.net.au  Thu Jul 14 16:26:00 2016
From: shannf at netspace.net.au (Frank Shann)
Date: Fri, 15 Jul 2016 00:26:00 +1000
Subject: [Users] Claws Windows 7 times out
In-Reply-To: <mailman.1973.1468381523.25613.users@lists.claws-mail.org>
References: <mailman.1973.1468381523.25613.users@lists.claws-mail.org>
Message-ID: <02224eb6-bb9a-5abb-622d-30470c16f0ea@netspace.net.au>

I'm sorry the previous log didn't show any activity.

I attach the log and the backup log after two failed attemots to 
download (time-out).

* Account 'shannf at pop3.netspace.net.au': Connecting to POP3 server: 
pop3.netspace.net.au:110...
[00:11:40] POP3< +OK Netspace Mail Ready.
[00:11:40] POP3> USER shannf
[00:11:40] POP3< +OK
[00:11:40] POP3> PASS ********
[00:11:40] POP3< +OK Logged in.
[00:11:40] POP3> STAT
[00:11:40] POP3< +OK 1 8202
[00:11:40] POP3> UIDL
[00:11:40] POP3< +OK
[00:11:40] POP3> LIST
[00:11:40] POP3< +OK 1 messages:
[00:11:40] POP3> RETR 1
[00:11:40] POP3< +OK 8202 octets
** Session timed out. You may be able to recover by increasing the 
timeout value in Preferences/Other/Miscellaneous.

Frank Shann


On 13/7/16 1:45 PM, users-request at lists.claws-mail.org wrote:
> Send Users mailing list submissions to
> 	users at lists.claws-mail.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.claws-mail.org/cgi-bin/mailman/listinfo/users
> or, via email, send a message with subject or body 'help' to
> 	users-request at lists.claws-mail.org
>
> You can reach the person managing the list at
> 	users-owner at lists.claws-mail.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Users digest..."
>
>
> Today's Topics:
>
>     1. Bsfilter does not work in Claws in Windows 7  64-bit (Frank Shann)
>     2. shortcut for action (Andreas Meyer)
>     3. Claws Windows 7 times out (Frank Shann)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 13 Jul 2016 03:06:49 +1000
> From: Frank Shann <shannf at netspace.net.au>
> To: users at lists.claws-mail.org
> Subject: [Users] Bsfilter does not work in Claws in Windows 7  64-bit
> Message-ID: <20160713030649.0000096e at netspace.net.au>
> Content-Type: text/plain; charset=US-ASCII
>
> Dear Andrej,
>
> Thank you for telling me how to find clawsrc.
>
> Thanks also for working on the bsfilterw.exe problem. Until the new version
> is ready, would an effective work-around be for me to add "C:\Program Files
> (x86)\Claws Mail" to my PATH?
>
> Frank
>
>
> On Tue, 12 Jul 2016 18:06:37 +0200
> users-request at lists.claws-mail.org wrote:
>
>> Send Users mailing list submissions to
>> 	users at lists.claws-mail.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> 	http://lists.claws-mail.org/cgi-bin/mailman/listinfo/users
>> or, via email, send a message with subject or body 'help' to
>> 	users-request at lists.claws-mail.org
>>
>> You can reach the person managing the list at
>> 	users-owner at lists.claws-mail.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Users digest..."
>>
>>
>> Today's Topics:
>>
>>     1. [Bug 3657] Downloading attachment failed. message :"can't
>>        write file" (noreply at thewildbeast.co.uk)
>>     2. [Bug 3657] Downloading attachment failed. message :"can't
>>        write file" (noreply at thewildbeast.co.uk)
>>     3. [Bug 3657] Downloading attachment failed. message :"can't
>>        write file" (noreply at thewildbeast.co.uk)
>>     4. [Bug 3657] Downloading attachment failed. message :"can't
>>        write file" (noreply at thewildbeast.co.uk)
>>     5. [Bug 3660] New: SSL Cert change shown on previously accepted
>>        certificates. (noreply at thewildbeast.co.uk)
>>     6. Re: BSFilter does not work in Claws in Windows 7 64-bit
>>        (Andrej Kacian)
>>     7. [Bug 3660] SSL Cert change shown on previously accepted
>>        certificates. (noreply at thewildbeast.co.uk)
>>     8. Re: [Bug 3657] Downloading attachment failed. message :"can't
>>        write file" (Paul Rolland (=?UTF-8?B?44Od44O844Or44O744Ot44Op44Oz?=))
>>     9. Re: [Bug 3657] Downloading attachment failed. message :"can't
>>        write file" (Michael Rasmussen)

-------------- next part --------------
claws.c:102:Starting Claws Mail version Claws Mail 3.13.2
main.c:769:runtime GTK+ 2.24.28 / GLib 2.45.2
main.c:777:buildtime GTK+ 2.24.28 / GLib 2.45.2
main.c:786:Compiled-in features:
main.c:797: Enchant
main.c:803: GnuTLS
main.c:809: IPv6
main.c:815: iconv
main.c:827: LDAP
main.c:833: libetpan 1.6
utils.c:1804:using default rc_dir C:\Users\Frank\AppData\Roaming\Claws-mail
prefs_gtk.c:1046:new file 'C:\Users\Frank\AppData\Roaming\Claws-mail\clawsrc'
prefs_gtk.c:1005:new section 'Common'
prefs_gtk.c:1005:new section 'CommonWin32'
prefs_gtk.c:1005:new section 'GPG'
prefs_gtk.c:1005:new section 'PluginsWin32_Common'
prefs_gtk.c:1005:new section 'PluginsWin32_GTK2'
prefs_gtk.c:1005:new section 'fancy'
prefs_gtk.c:1005:new section 'AttRemover'
prefs_gtk.c:1005:new section 'Bsfilter'
prefs_gtk.c:1005:new section 'AddressKeeper'
prefs_gtk.c:1005:new section 'AttachWarner'
prefs_gtk.c:1005:new section 'Fetchinfo'
prefs_gtk.c:1046:new file 'C:\Users\Frank\AppData\Roaming\Claws-mail\folderitemrc'
prefs_gtk.c:984:cache: C:\Users\Frank\AppData\Roaming\Claws-mail\folderitemrc: No such file or directory
prefs_gtk.c:1084:destroying cache
current dir: C:\Users\Frank\AppData\Roaming
prefs.c:297:Found [PluginsWin32_Common]
current dir: C:\Users\Frank\AppData\Roaming\Claws-mail
current dir: C:\Users\Frank\AppData\Roaming
folder.c:124:registering folder class mh
folder.c:124:registering folder class imap
folder.c:124:registering folder class news
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Common]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [CommonWin32]
prefs_gtk.c:147:Finished reading configuration.
prefs_themes.c:369:Creating preferences for themes...
stock_pixmap.c:501:skipping theme scan, dir C:\Users\Frank\AppData\Roaming\Claws-mail\themes could not be opened: Error opening directory 'C:\Users\Frank\AppData\Roaming\Claws-mail\themes': No such file or directory (4)
stock_pixmap.c:501:skipping theme scan, dir C:\Program Files (x86)\Claws Mail\share\claws-mail\themes could not be opened: Error opening directory 'C:\Program Files (x86)\Claws Mail\share\claws-mail\themes': No such file or directory (4)
prefs_actions.c:443:Reading actions configurations...
prefs_display_header.c:429:Reading configuration for displaying headers...
addressbook.c:4214:Reading address index...
addressbook.c:4263:done.
mainwindow.c:1451:Creating main window...
toolbar.c:724:read Toolbar Configuration from toolbar_main.xml
folderview.c:587:Creating folder view...
folderview.c:419:creating tree...
hooks.c:71:registed new hook for 'folder_update' as id 1
hooks.c:71:registed new hook for 'folder_item_update' as id 1
summaryview.c:532:Creating summary view...
hooks.c:71:registed new hook for 'msginfo_update' as id 1
hooks.c:71:registed new hook for 'folder_item_update' as id 2
hooks.c:71:registed new hook for 'folder_update' as id 2
messageview.c:405:Creating message view...
headerview.c:72:Creating header view...
noticeview.c:73:Creating notice view...
mimeview.c:269:Creating MIME view...
noticeview.c:73:Creating notice view...
textview.c:287:Creating text view...
hooks.c:71:registed new hook for 'msginfo_update' as id 2
logwindow.c:88:Creating log window...
hooks.c:71:registed new hook for 'log_append_text' as id 1
logwindow.c:88:Creating log window...
hooks.c:71:registed new hook for 'debug_append_text' as id 1
message: filtering log disabled
mainwindow.c:2113:done.
mainwindow.c:3651:Setting widgets... mainwindow.c:3856:done.
summaryview.c:1248:called inc_lock (lock count 1)
summaryview.c:1321:empty folder (00000000 (null) 00000000 0)

summaryview.c:1333:called inc_unlock (lock count 0)
summaryview.c:1334:TIMING : 0s000ms
hooks.c:71:registed new hook for 'sslcert_ask' as id 1
hooks.c:71:registed new hook for 'progressindicator_hooklist' as id 1
hooks.c:71:registed new hook for 'sslcert_get_client_cert' as id 1
hooks.c:71:registed new hook for 'sslcert_get_password' as id 1
account.c:200:Reading all config for each account...
account.c:215:Found label: Account: 1
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_customheader.c:332:Reading custom header configuration...
folderview.c:332:setting titles...
folderview.c:765:called inc_lock (lock count 1)
folderview.c:766:Setting folder info...
folderview.c:792:called inc_unlock (lock count 0)
summaryview.c:1248:called inc_lock (lock count 1)
summaryview.c:1321:empty folder (00000000 (null) 00000000 0)

summaryview.c:1333:called inc_unlock (lock count 0)
summaryview.c:1334:TIMING : 0s000ms
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
folderview.c:765:called inc_lock (lock count 1)
folderview.c:766:Setting folder info...
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Mail\queue\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (0 items read)
msgcache.c:794:Cache size: 0 messages, 0 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 0
msgcache.c:277:TIMING : 0s000ms
folderview.c:792:called inc_unlock (lock count 0)
folderview.c:765:called inc_lock (lock count 1)
folderview.c:766:Setting folder info...
msgcache.c:277:TIMING : 0s000ms
folderview.c:792:called inc_unlock (lock count 0)
hooks.c:71:registed new hook for 'avatar_image_render' as id 1
prefs.c:297:Found [PluginsWin32_GTK2]
plugin.c:449:trying to load `pgpcore.dll'
plugin.c:386:trying to load pgpcore.dll in default plugin directory C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [GPG]
prefs_gtk.c:147:Finished reading configuration.
prefs_gpg.c:598:Can't disable gpg agent (no GPG_AGENT_INFO)
sgpgme.c:655:setting gpgme CTYPE locale
sgpgme.c:662:setting gpgme CTYPE locale to: en_US
sgpgme.c:669:setting gpgme locale to UTF8: en_US.UTF-8
sgpgme.c:672:done
sgpgme.c:680:setting gpgme MESSAGES locale
sgpgme.c:687:setting gpgme MESSAGES locale to: en_US
sgpgme.c:693:setting gpgme locale to UTF8: en_US.UTF-8
sgpgme.c:697:done
sgpgme.c:706:GpgME Protocol: Spawn
Version: 1.0 (req 1.0)
Executable: /nonexistent
prefs_gpg.c:495:Saving GPG config
prefs.c:310:Found [GPG]
C:\Users\Frank\AppData\Roaming\Claws-mail\clawsrc: hooks.c:71:registed new hook for 'address_completion_build_address_list_hooklist' as id 1
autocompletion.c:136:PGP address autocompletion hook registered
plugin.c:523:Plugin PGP/Core (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll: 0s000ms
plugin.c:271:adding C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime to C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll rdeps
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime'
plugin.c:368:plugin licence check passed: GPL3+ found
plugin.c:523:Plugin PGP/MIME (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime: 0s000ms
plugin.c:271:adding C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline to C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll rdeps
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline'
plugin.c:368:plugin licence check passed: GPL3+ found
plugin.c:523:Plugin PGP/inline (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\address_keeper.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
hooks.c:71:registed new hook for 'compose_check_before_send' as id 1
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [AddressKeeper]
prefs_gtk.c:147:Finished reading configuration.
address_keeper.c:258:Address Keeper plugin loaded
plugin.c:523:Plugin Address Keeper (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\address_keeper.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\address_keeper.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\att_remover.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [AttRemover]
prefs_gtk.c:147:Finished reading configuration.
plugin.c:523:Plugin AttRemover (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\att_remover.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\att_remover.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\attachwarner.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
hooks.c:71:registed new hook for 'compose_check_before_send' as id 2
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [AttachWarner]
prefs_gtk.c:147:Finished reading configuration.
attachwarner.c:262:Attachment warner plugin loaded
plugin.c:523:Plugin Attach warner (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\attachwarner.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\attachwarner.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fetchinfo.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
hooks.c:71:registed new hook for 'mail_receive_hooklist' as id 1
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Fetchinfo]
prefs_gtk.c:147:Finished reading configuration.
fetchinfo_plugin_gtk.c:193:Fetchinfo GTK plugin loaded
fetchinfo_plugin.c:184:Fetchinfo plugin loaded
plugin.c:523:Plugin Fetchinfo (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fetchinfo.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fetchinfo.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fancy.dll'
plugin.c:368:plugin licence check passed: GPL3 found
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [fancy]
prefs_gtk.c:147:Finished reading configuration.
plugin.c:523:Plugin Fancy HTML Viewer (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fancy.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fancy.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\tnef_parse.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
plugin.c:523:Plugin TNEF Parser (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\tnef_parse.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\tnef_parse.dll: 0s000ms
prefs_gtk.c:1081:no cache
main.c:1560:TIMING startup: 0s000ms
folderview.c:2159:newly selected 03AEFE60, opened 00000000
folderview.c:2205:Folder inbox is selected
folderview.c:2221:Opening folder inbox...
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Mail\inbox (1468505608 <= 1468505608)
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Mail\inbox\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (7 items read)
msgcache.c:794:Cache size: 7 messages, 2891 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 2891
msgcache.c:277:TIMING : 0s000ms
folder.c:2042:TIMING : 0s000ms
summaryview.c:1044:showing From , must show From 
summaryview.c:1248:called inc_lock (lock count 1)
summaryview.c:1346:Scanning folder (inbox)...
msgcache.c:277:TIMING : 0s000ms
summaryview.c:1210:TIMING : 0s000ms
summaryview.c:1458:TIMING removing hidden: 0s000ms
summaryview.c:3128:	Setting summary from message data...
summaryview.c:3199:TIMING unthreaded: 0s000ms
summaryview.c:3216:done.
summaryview.c:3219:	msgid hash table size = 7
summaryview.c:3222:	subject hash table size = 7
summaryview.c:2990:Sorting summary...summaryview.c:3004:done.
summaryview.c:3011:TIMING : 0s000ms
summaryview.c:3238:TIMING bold_unread: 0s000ms
summaryview.c:3243:TIMING : 0s000ms
summaryview.c:1583:
summaryview.c:1588:called inc_unlock (lock count 0)
summaryview.c:1589:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 2891
folderview.c:2283:TIMING : 0s000ms
folderview.c:2159:newly selected 03AEFE60, opened 03AEFE60
folderview.c:2163:TIMING : 0s000ms
folderview.c:2159:newly selected 03AEFE60, opened 03AEFE60
folderview.c:2163:TIMING : 0s000ms
progressdialog.c:68:Creating progress dialog...
inc.c:797:getting new messages of account shannf at pop3.netspace.net.au...
message: Account 'shannf at pop3.netspace.net.au': Connecting to POP3 server: pop3.netspace.net.au:110...
session.c:202:session (057BF1D8): connected
[00:15:10] POP3< +OK Netspace Mail Ready.
[00:15:10] POP3> USER shannf
[00:15:10] POP3< +OK
[00:15:10] POP3> PASS ********
[00:15:10] POP3< +OK Logged in.
[00:15:10] POP3> STAT
[00:15:10] POP3< +OK 1 8202
[00:15:10] POP3> UIDL
[00:15:10] POP3< +OK
pop.c:276:num 1 uidl 0000eb943ee29062: unknown
[00:15:10] POP3> LIST
[00:15:10] POP3< +OK 1 messages:
pop.c:346:retrieving 1 [0000eb943ee29062]
[00:15:10] POP3> RETR 1
[00:15:11] POP3< +OK 8202 octets
    message/rfc822 (offset:0 length:34546 encoding: 6)
        text/plain (offset:3763 length:30783 encoding: 0)
hooks.c:71:registed new hook for 'avatar_header_update' as id 1
textview.c:712:TIMING : 0s000ms
textview.c:1181:Viewing text content of type: plain (length: 30783)
textview.c:828:TIMING : 0s000ms
textview.c:845:TIMING : 0s000ms
textview.c:891:TIMING : 0s000ms
textview.c:651:TIMING : 0s000ms
summaryview.c:3664:TIMING : 0s000ms
warning: session timeout.session.c:376:session (057BF1D8): closed
current dir: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder
current dir: C:\Users\Frank\AppData\Roaming
current dir: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder
mh.c:1097:searching missing folders...
mh.c:1128:scanning C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder ...
mh.c:1161:new folder 'draft' found.
mh.c:1128:scanning draft ...
mh.c:1420:MH: forced mtime of draft to 1468307736
mh.c:1161:new folder 'inbox' found.
mh.c:1128:scanning inbox ...
mh.c:1420:MH: forced mtime of inbox to 1468307736
mh.c:1161:new folder 'processing-1' found.
mh.c:1128:scanning processing-1 ...
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
mh.c:1161:new folder 'queue' found.
mh.c:1128:scanning queue ...
mh.c:1420:MH: forced mtime of queue to 1468307736
mh.c:1161:new folder 'sent' found.
mh.c:1128:scanning sent ...
mh.c:1420:MH: forced mtime of sent to 1468307736
mh.c:1161:new folder 'trash' found.
mh.c:1128:scanning trash ...
mh.c:1420:MH: forced mtime of trash to 1468307736
mh.c:1420:MH: forced mtime of TEMP_FOLDER to 1468307736
folder.c:4284:*TMP* already created C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1
folder.c:2152:Scanning folder processing-1 for cache changes.
mh.c:298:mh_get_num_list(): Scanning processing-1 ...
current dir: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (0 items read)
msgcache.c:794:Cache size: 0 messages, 0 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 2891
msgcache.c:277:TIMING : 0s000ms
msgcache.c:277:TIMING : 0s000ms
filtering.c:198:checking 0 messages
warning: [00:16:11] Session timed out. You may be able to recover by increasing the timeout value in Preferences/Other/Miscellaneous.
alertpanel.c:254:Creating alert panel dialog...
alertpanel.c:213:called inc_lock (lock count 1)
alertpanel.c:223:called inc_unlock (lock count 0)
alertpanel.c:107:return value = 0
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1 (1468343376 <= 1468343376)
folder.c:2734:Save cache for folder #mh/TEMP_FOLDER/processing-1
msgcache.c:1189:	Writing message cache to (null) and (null)...
msgcache.c:1270:done.
msgcache.c:1271:TIMING : 0s000ms
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
session.c:250:session (057BF1D8): destroyed
main.c:2092:exiting
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Mail\inbox (1468505608 <= 1468505608)
folder.c:2734:Save cache for folder #mh/Mailbox/inbox
msgcache.c:1189:	Writing message cache to (null) and (null)...
msgcache.c:1270:done.
msgcache.c:1271:TIMING : 0s000ms
mh.c:1420:MH: forced mtime of inbox to 1468505608
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Mail\inbox (1468505608 <= 1468505608)
msgcache.c:277:TIMING : 0s000ms
mh.c:1388:TIMING : 0s000ms
mh.c:1420:MH: forced mtime of inbox to 1468505821
-------------- next part --------------
claws.c:102:Starting Claws Mail version Claws Mail 3.13.2
main.c:769:runtime GTK+ 2.24.28 / GLib 2.45.2
main.c:777:buildtime GTK+ 2.24.28 / GLib 2.45.2
main.c:786:Compiled-in features:
main.c:797: Enchant
main.c:803: GnuTLS
main.c:809: IPv6
main.c:815: iconv
main.c:827: LDAP
main.c:833: libetpan 1.6
utils.c:1804:using default rc_dir C:\Users\Frank\AppData\Roaming\Claws-mail
prefs_gtk.c:1046:new file 'C:\Users\Frank\AppData\Roaming\Claws-mail\clawsrc'
prefs_gtk.c:1005:new section 'Common'
prefs_gtk.c:1005:new section 'CommonWin32'
prefs_gtk.c:1005:new section 'GPG'
prefs_gtk.c:1005:new section 'PluginsWin32_Common'
prefs_gtk.c:1005:new section 'PluginsWin32_GTK2'
prefs_gtk.c:1005:new section 'fancy'
prefs_gtk.c:1005:new section 'AttRemover'
prefs_gtk.c:1005:new section 'Bsfilter'
prefs_gtk.c:1005:new section 'AddressKeeper'
prefs_gtk.c:1005:new section 'AttachWarner'
prefs_gtk.c:1005:new section 'Fetchinfo'
prefs_gtk.c:1046:new file 'C:\Users\Frank\AppData\Roaming\Claws-mail\folderitemrc'
prefs_gtk.c:984:cache: C:\Users\Frank\AppData\Roaming\Claws-mail\folderitemrc: No such file or directory
prefs_gtk.c:1084:destroying cache
current dir: C:\Users\Frank\AppData\Roaming
prefs.c:297:Found [PluginsWin32_Common]
current dir: C:\Users\Frank\AppData\Roaming\Claws-mail
current dir: C:\Users\Frank\AppData\Roaming
folder.c:124:registering folder class mh
folder.c:124:registering folder class imap
folder.c:124:registering folder class news
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Common]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [CommonWin32]
prefs_gtk.c:147:Finished reading configuration.
prefs_themes.c:369:Creating preferences for themes...
stock_pixmap.c:501:skipping theme scan, dir C:\Users\Frank\AppData\Roaming\Claws-mail\themes could not be opened: Error opening directory 'C:\Users\Frank\AppData\Roaming\Claws-mail\themes': No such file or directory (4)
stock_pixmap.c:501:skipping theme scan, dir C:\Program Files (x86)\Claws Mail\share\claws-mail\themes could not be opened: Error opening directory 'C:\Program Files (x86)\Claws Mail\share\claws-mail\themes': No such file or directory (4)
prefs_actions.c:443:Reading actions configurations...
prefs_display_header.c:429:Reading configuration for displaying headers...
addressbook.c:4214:Reading address index...
addressbook.c:4263:done.
mainwindow.c:1451:Creating main window...
toolbar.c:724:read Toolbar Configuration from toolbar_main.xml
folderview.c:587:Creating folder view...
folderview.c:419:creating tree...
hooks.c:71:registed new hook for 'folder_update' as id 1
hooks.c:71:registed new hook for 'folder_item_update' as id 1
summaryview.c:532:Creating summary view...
hooks.c:71:registed new hook for 'msginfo_update' as id 1
hooks.c:71:registed new hook for 'folder_item_update' as id 2
hooks.c:71:registed new hook for 'folder_update' as id 2
messageview.c:405:Creating message view...
headerview.c:72:Creating header view...
noticeview.c:73:Creating notice view...
mimeview.c:269:Creating MIME view...
noticeview.c:73:Creating notice view...
textview.c:287:Creating text view...
hooks.c:71:registed new hook for 'msginfo_update' as id 2
logwindow.c:88:Creating log window...
hooks.c:71:registed new hook for 'log_append_text' as id 1
logwindow.c:88:Creating log window...
hooks.c:71:registed new hook for 'debug_append_text' as id 1
message: filtering log disabled
mainwindow.c:2113:done.
mainwindow.c:3651:Setting widgets... mainwindow.c:3856:done.
summaryview.c:1248:called inc_lock (lock count 1)
summaryview.c:1321:empty folder (00000000 (null) 00000000 0)

summaryview.c:1333:called inc_unlock (lock count 0)
summaryview.c:1334:TIMING : 0s000ms
hooks.c:71:registed new hook for 'sslcert_ask' as id 1
hooks.c:71:registed new hook for 'progressindicator_hooklist' as id 1
hooks.c:71:registed new hook for 'sslcert_get_client_cert' as id 1
hooks.c:71:registed new hook for 'sslcert_get_password' as id 1
account.c:200:Reading all config for each account...
account.c:215:Found label: Account: 1
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_customheader.c:332:Reading custom header configuration...
folderview.c:332:setting titles...
folderview.c:765:called inc_lock (lock count 1)
folderview.c:766:Setting folder info...
folderview.c:792:called inc_unlock (lock count 0)
summaryview.c:1248:called inc_lock (lock count 1)
summaryview.c:1321:empty folder (00000000 (null) 00000000 0)

summaryview.c:1333:called inc_unlock (lock count 0)
summaryview.c:1334:TIMING : 0s000ms
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
folderview.c:765:called inc_lock (lock count 1)
folderview.c:766:Setting folder info...
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Mail\queue\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (0 items read)
msgcache.c:794:Cache size: 0 messages, 0 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 0
msgcache.c:277:TIMING : 0s000ms
folderview.c:792:called inc_unlock (lock count 0)
folderview.c:765:called inc_lock (lock count 1)
folderview.c:766:Setting folder info...
msgcache.c:277:TIMING : 0s000ms
folderview.c:792:called inc_unlock (lock count 0)
hooks.c:71:registed new hook for 'avatar_image_render' as id 1
prefs.c:297:Found [PluginsWin32_GTK2]
plugin.c:449:trying to load `pgpcore.dll'
plugin.c:386:trying to load pgpcore.dll in default plugin directory C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [GPG]
prefs_gtk.c:147:Finished reading configuration.
prefs_gpg.c:598:Can't disable gpg agent (no GPG_AGENT_INFO)
sgpgme.c:655:setting gpgme CTYPE locale
sgpgme.c:662:setting gpgme CTYPE locale to: en_US
sgpgme.c:669:setting gpgme locale to UTF8: en_US.UTF-8
sgpgme.c:672:done
sgpgme.c:680:setting gpgme MESSAGES locale
sgpgme.c:687:setting gpgme MESSAGES locale to: en_US
sgpgme.c:693:setting gpgme locale to UTF8: en_US.UTF-8
sgpgme.c:697:done
sgpgme.c:706:GpgME Protocol: Spawn
Version: 1.0 (req 1.0)
Executable: /nonexistent
prefs_gpg.c:495:Saving GPG config
prefs.c:310:Found [GPG]
C:\Users\Frank\AppData\Roaming\Claws-mail\clawsrc: hooks.c:71:registed new hook for 'address_completion_build_address_list_hooklist' as id 1
autocompletion.c:136:PGP address autocompletion hook registered
plugin.c:523:Plugin PGP/Core (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll: 0s000ms
plugin.c:271:adding C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime to C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll rdeps
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime'
plugin.c:368:plugin licence check passed: GPL3+ found
plugin.c:523:Plugin PGP/MIME (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpmime: 0s000ms
plugin.c:271:adding C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline to C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpcore.dll rdeps
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline'
plugin.c:368:plugin licence check passed: GPL3+ found
plugin.c:523:Plugin PGP/inline (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\pgpinline: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\address_keeper.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
hooks.c:71:registed new hook for 'compose_check_before_send' as id 1
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [AddressKeeper]
prefs_gtk.c:147:Finished reading configuration.
address_keeper.c:258:Address Keeper plugin loaded
plugin.c:523:Plugin Address Keeper (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\address_keeper.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\address_keeper.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\att_remover.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [AttRemover]
prefs_gtk.c:147:Finished reading configuration.
plugin.c:523:Plugin AttRemover (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\att_remover.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\att_remover.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\attachwarner.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
hooks.c:71:registed new hook for 'compose_check_before_send' as id 2
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [AttachWarner]
prefs_gtk.c:147:Finished reading configuration.
attachwarner.c:262:Attachment warner plugin loaded
plugin.c:523:Plugin Attach warner (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\attachwarner.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\attachwarner.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fetchinfo.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
hooks.c:71:registed new hook for 'mail_receive_hooklist' as id 1
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Fetchinfo]
prefs_gtk.c:147:Finished reading configuration.
fetchinfo_plugin_gtk.c:193:Fetchinfo GTK plugin loaded
fetchinfo_plugin.c:184:Fetchinfo plugin loaded
plugin.c:523:Plugin Fetchinfo (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fetchinfo.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fetchinfo.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fancy.dll'
plugin.c:368:plugin licence check passed: GPL3 found
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [fancy]
prefs_gtk.c:147:Finished reading configuration.
plugin.c:523:Plugin Fancy HTML Viewer (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fancy.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\fancy.dll: 0s000ms
plugin.c:449:trying to load `C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\tnef_parse.dll'
plugin.c:368:plugin licence check passed: GPL3+ found
plugin.c:523:Plugin TNEF Parser (from file C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\tnef_parse.dll) loaded
plugin.c:524:TIMING C:\Program Files (x86)\Claws Mail\lib\claws-mail\plugins\tnef_parse.dll: 0s000ms
prefs_gtk.c:1081:no cache
main.c:1560:TIMING startup: 0s001ms
progressdialog.c:68:Creating progress dialog...
inc.c:797:getting new messages of account shannf at pop3.netspace.net.au...
message: Account 'shannf at pop3.netspace.net.au': Connecting to POP3 server: pop3.netspace.net.au:110...
session.c:202:session (0576BDD0): connected
[00:10:34] POP3< +OK Netspace Mail Ready.
[00:10:34] POP3> USER shannf
[00:10:34] POP3< +OK
[00:10:34] POP3> PASS ********
[00:10:34] POP3< +OK Logged in.
[00:10:34] POP3> STAT
[00:10:34] POP3< +OK 0 0
[00:10:34] POP3> QUIT
[00:10:34] POP3< +OK Logging out.
session.c:376:session (0576BDD0): closed
current dir: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder
current dir: C:\Users\Frank\AppData\Roaming
current dir: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder
mh.c:1097:searching missing folders...
mh.c:1128:scanning C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder ...
mh.c:1161:new folder 'draft' found.
mh.c:1128:scanning draft ...
mh.c:1420:MH: forced mtime of draft to 1468307736
mh.c:1161:new folder 'inbox' found.
mh.c:1128:scanning inbox ...
mh.c:1420:MH: forced mtime of inbox to 1468307736
mh.c:1161:new folder 'processing-1' found.
mh.c:1128:scanning processing-1 ...
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
mh.c:1161:new folder 'queue' found.
mh.c:1128:scanning queue ...
mh.c:1420:MH: forced mtime of queue to 1468307736
mh.c:1161:new folder 'sent' found.
mh.c:1128:scanning sent ...
mh.c:1420:MH: forced mtime of sent to 1468307736
mh.c:1161:new folder 'trash' found.
mh.c:1128:scanning trash ...
mh.c:1420:MH: forced mtime of trash to 1468307736
mh.c:1420:MH: forced mtime of TEMP_FOLDER to 1468307736
folder.c:4284:*TMP* already created C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1
folder.c:2152:Scanning folder processing-1 for cache changes.
mh.c:298:mh_get_num_list(): Scanning processing-1 ...
current dir: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (0 items read)
msgcache.c:794:Cache size: 0 messages, 0 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 0
msgcache.c:277:TIMING : 0s000ms
msgcache.c:277:TIMING : 0s000ms
filtering.c:198:checking 0 messages
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1 (1468343376 <= 1468343376)
folder.c:2734:Save cache for folder #mh/TEMP_FOLDER/processing-1
msgcache.c:1189:	Writing message cache to (null) and (null)...
msgcache.c:1270:done.
msgcache.c:1271:TIMING : 0s000ms
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
session.c:250:session (0576BDD0): destroyed
progressdialog.c:68:Creating progress dialog...
inc.c:797:getting new messages of account shannf at pop3.netspace.net.au...
message: Account 'shannf at pop3.netspace.net.au': Connecting to POP3 server: pop3.netspace.net.au:110...
session.c:202:session (0576BDD0): connected
[00:10:51] POP3< +OK Netspace Mail Ready.
[00:10:51] POP3> USER shannf
[00:10:51] POP3< +OK
[00:10:51] POP3> PASS ********
[00:10:51] POP3< +OK Logged in.
[00:10:51] POP3> STAT
[00:10:51] POP3< +OK 0 0
[00:10:51] POP3> QUIT
[00:10:51] POP3< +OK Logging out.
session.c:376:session (0576BDD0): closed
folder.c:4284:*TMP* already created C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1
folder.c:2152:Scanning folder processing-1 for cache changes.
mh.c:298:mh_get_num_list(): Scanning processing-1 ...
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (0 items read)
msgcache.c:794:Cache size: 0 messages, 0 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 0
msgcache.c:277:TIMING : 0s000ms
msgcache.c:277:TIMING : 0s000ms
filtering.c:198:checking 0 messages
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1 (1468343376 <= 1468343376)
folder.c:2734:Save cache for folder #mh/TEMP_FOLDER/processing-1
msgcache.c:1189:	Writing message cache to (null) and (null)...
msgcache.c:1270:done.
msgcache.c:1271:TIMING : 0s000ms
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
session.c:250:session (0576BDD0): destroyed
progressdialog.c:68:Creating progress dialog...
inc.c:797:getting new messages of account shannf at pop3.netspace.net.au...
message: Account 'shannf at pop3.netspace.net.au': Connecting to POP3 server: pop3.netspace.net.au:110...
session.c:202:session (0576BDD0): connected
[00:11:11] POP3< +OK Netspace Mail Ready.
[00:11:11] POP3> USER shannf
[00:11:11] POP3< +OK
[00:11:11] POP3> PASS ********
[00:11:11] POP3< +OK Logged in.
[00:11:11] POP3> STAT
[00:11:11] POP3< +OK 0 0
[00:11:11] POP3> QUIT
[00:11:11] POP3< +OK Logging out.
session.c:376:session (0576BDD0): closed
folder.c:4284:*TMP* already created C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1
folder.c:2152:Scanning folder processing-1 for cache changes.
mh.c:298:mh_get_num_list(): Scanning processing-1 ...
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (0 items read)
msgcache.c:794:Cache size: 0 messages, 0 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 0
msgcache.c:277:TIMING : 0s000ms
msgcache.c:277:TIMING : 0s000ms
filtering.c:198:checking 0 messages
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1 (1468343376 <= 1468343376)
folder.c:2734:Save cache for folder #mh/TEMP_FOLDER/processing-1
msgcache.c:1189:	Writing message cache to (null) and (null)...
msgcache.c:1270:done.
msgcache.c:1271:TIMING : 0s000ms
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
session.c:250:session (0576BDD0): destroyed
folderview.c:2159:newly selected 03ABBE60, opened 00000000
folderview.c:2205:Folder inbox is selected
folderview.c:2221:Opening folder inbox...
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Mail\inbox (1468380132 <= 1468380132)
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Mail\inbox\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (7 items read)
msgcache.c:794:Cache size: 7 messages, 2891 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 2891
msgcache.c:277:TIMING : 0s000ms
folder.c:2042:TIMING : 0s000ms
summaryview.c:1044:showing From , must show From 
summaryview.c:1248:called inc_lock (lock count 1)
summaryview.c:1346:Scanning folder (inbox)...
msgcache.c:277:TIMING : 0s000ms
summaryview.c:1210:TIMING : 0s000ms
summaryview.c:1458:TIMING removing hidden: 0s000ms
summaryview.c:3128:	Setting summary from message data...
summaryview.c:3199:TIMING unthreaded: 0s000ms
summaryview.c:3216:done.
summaryview.c:3219:	msgid hash table size = 7
summaryview.c:3222:	subject hash table size = 7
summaryview.c:2990:Sorting summary...summaryview.c:3004:done.
summaryview.c:3011:TIMING : 0s000ms
summaryview.c:3238:TIMING bold_unread: 0s000ms
summaryview.c:3243:TIMING : 0s000ms
summaryview.c:1583:
summaryview.c:1588:called inc_unlock (lock count 0)
summaryview.c:1589:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 2891
folderview.c:2283:TIMING : 0s000ms
folderview.c:2159:newly selected 03ABBE60, opened 03ABBE60
folderview.c:2163:TIMING : 0s000ms
folderview.c:2159:newly selected 03ABBE60, opened 03ABBE60
folderview.c:2163:TIMING : 0s000ms
progressdialog.c:68:Creating progress dialog...
inc.c:797:getting new messages of account shannf at pop3.netspace.net.au...
message: Account 'shannf at pop3.netspace.net.au': Connecting to POP3 server: pop3.netspace.net.au:110...
session.c:202:session (057ACFC8): connected
[00:11:40] POP3< +OK Netspace Mail Ready.
[00:11:40] POP3> USER shannf
[00:11:40] POP3< +OK
[00:11:40] POP3> PASS ********
[00:11:40] POP3< +OK Logged in.
[00:11:40] POP3> STAT
[00:11:40] POP3< +OK 1 8202
[00:11:40] POP3> UIDL
[00:11:40] POP3< +OK
pop.c:276:num 1 uidl 0000eb943ee29062: unknown
[00:11:40] POP3> LIST
[00:11:40] POP3< +OK 1 messages:
pop.c:346:retrieving 1 [0000eb943ee29062]
[00:11:40] POP3> RETR 1
[00:11:40] POP3< +OK 8202 octets
warning: session timeout.session.c:376:session (057ACFC8): closed
folder.c:4284:*TMP* already created C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1
folder.c:2152:Scanning folder processing-1 for cache changes.
mh.c:298:mh_get_num_list(): Scanning processing-1 ...
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
msgcache.c:605:	Reading swapped message cache from C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1\.claws_cache...
msgcache.c:621:using Noop Converter
msgcache.c:793:done. (0 items read)
msgcache.c:794:Cache size: 0 messages, 0 bytes
msgcache.c:824:reading swapped mark file.
msgcache.c:918:reading swapped tags file.
folder.c:2709:TIMING : 0s000ms
folder.c:2570:Total cache memory usage: 2891
msgcache.c:277:TIMING : 0s000ms
msgcache.c:277:TIMING : 0s000ms
filtering.c:198:checking 0 messages
warning: [00:12:40] Session timed out. You may be able to recover by increasing the timeout value in Preferences/Other/Miscellaneous.
alertpanel.c:254:Creating alert panel dialog...
alertpanel.c:213:called inc_lock (lock count 1)
alertpanel.c:223:called inc_unlock (lock count 0)
alertpanel.c:107:return value = 1
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Claws-mail\tempfolder\processing-1 (1468343376 <= 1468343376)
folder.c:2734:Save cache for folder #mh/TEMP_FOLDER/processing-1
msgcache.c:1189:	Writing message cache to (null) and (null)...
msgcache.c:1270:done.
msgcache.c:1271:TIMING : 0s000ms
mh.c:1420:MH: forced mtime of processing-1 to 1468343376
session.c:250:session (057ACFC8): destroyed
main.c:2092:exiting
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Mail\inbox (1468380132 <= 1468380132)
folder.c:2734:Save cache for folder #mh/Mailbox/inbox
msgcache.c:1189:	Writing message cache to (null) and (null)...
msgcache.c:1270:done.
msgcache.c:1271:TIMING : 0s000ms
mh.c:1420:MH: forced mtime of inbox to 1468380132
mh.c:236:MH scan not required: C:\Users\Frank\AppData\Roaming\Mail\inbox (1468380132 <= 1468380132)
msgcache.c:277:TIMING : 0s000ms
mh.c:1388:TIMING : 0s000ms
mh.c:1420:MH: forced mtime of inbox to 1468505608

From andrej at kacian.sk  Fri Jul 15 11:00:24 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Fri, 15 Jul 2016 11:00:24 +0200
Subject: [Users] Claws Windows 7 times out
In-Reply-To: <02224eb6-bb9a-5abb-622d-30470c16f0ea@netspace.net.au>
References: <mailman.1973.1468381523.25613.users@lists.claws-mail.org>
 <02224eb6-bb9a-5abb-622d-30470c16f0ea@netspace.net.au>
Message-ID: <20160715110024.756a174a@penny>

On Fri, 15 Jul 2016 00:26:00 +1000
Frank Shann <shannf at netspace.net.au> wrote:

> I attach the log and the backup log after two failed attemots to 
> download (time-out).

Hi Frank,

I'm sorry, but I have no idea what goes wrong. The debug log you sent
suggests that Claws Mail starts to download the single message that
your POP3 server had waiting, but never finishes, and the connection
times out. Perhaps the server doesn't send the trailing "." that
means end of a message, so Claws Mail keeps on waiting for more lines,
until the timeout.

It's hard to figure out anything more without physically sitting
at your computer. Since you're using unencrypted POP3 connection (quite
rare today), you could:

1. Try a manual connection using any telnet program you can find, e.g.
putty.exe. Just connect to your server, and enter all the commands you
see in network log as outgoing ("POP3>"), supplying your password
instead of *****, if course.

2. Try using program like Wireshark to capture complete network traffic
from a POP3 session where Claws Mail times out again, and see if
there's something wrong or missing.

Regards,
-- 
Andrej


From claws-mail at fy3.co.uk  Fri Jul 15 13:07:10 2016
From: claws-mail at fy3.co.uk (Chris Hirst)
Date: Fri, 15 Jul 2016 12:07:10 +0100
Subject: [Users] Claws Windows 7 times out
In-Reply-To: <20160715110024.756a174a@penny>
References: <mailman.1973.1468381523.25613.users@lists.claws-mail.org>
 <02224eb6-bb9a-5abb-622d-30470c16f0ea@netspace.net.au>
 <20160715110024.756a174a@penny>
Message-ID: <20160715120710.76b7bcfe@chris-main>

Hi,

I get timeouts a lot.
Fifteen accounts, all POP3, claws 3.13.2, Linux Mint 17.3 64bit and ALL accounts on the same server of which I am the administrator/tech support etc. (it's a VPS running Exim on Centos 6.5).

Sometimes it will go down the accounts and timeout every alternate one (the first one times out second okay or vice-versa) and so on.

OR

It may timeout the first then collect from the next two or three, timeout on one or two and so on. On the timeouts there is nothing logged at the server to show that it has even tried to connect. 

OR

It may timeout two or three, connect to the fourth one, timeout a few more

extract from today's network log attached


I have tested with ALL my local machines powered down, various devices such as smartphones tablets, one Linux box running bittorrent with various Linux distros, a local web development server, android tablet connected to Planet Rock radio stream with no significant differences noted.

The same accounts have been tested on an Android tablet connected via local wireless, in the same sequence using POP3 and leaving messages on the server, all went through with no problem. So until now I have just put it down to something hinky on my machine.

Thanks
Chris Hirst
-------------- next part --------------
A non-text attachment was scrubbed...
Name: claws-log-2016-07-15
Type: application/octet-stream
Size: 3345 bytes
Desc: not available
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160715/71ad9ed6/attachment.obj>

From claws at thewildbeast.co.uk  Fri Jul 15 14:01:09 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Fri, 15 Jul 2016 13:01:09 +0100
Subject: [Users] Claws Windows 7 times out
In-Reply-To: <20160715120710.76b7bcfe@chris-main>
References: <mailman.1973.1468381523.25613.users@lists.claws-mail.org>
 <02224eb6-bb9a-5abb-622d-30470c16f0ea@netspace.net.au>
 <20160715110024.756a174a@penny>
 <20160715120710.76b7bcfe@chris-main>
Message-ID: <20160715130109.0fb8bbb5@kujata>

On Fri, 15 Jul 2016 12:07:10 +0100
Chris Hirst <claws-mail at fy3.co.uk> wrote: 

> So until now I have just put it down to something hinky on my
> machine.

At the moment it still looks like that. See the debugging suggestions
in the answer from Andrej.

with regards

Paul


From linux at slavino.sk  Fri Jul 15 15:35:31 2016
From: linux at slavino.sk (Slavko)
Date: Fri, 15 Jul 2016 15:35:31 +0200
Subject: [Users] Claws Windows 7 times out
In-Reply-To: <20160715130109.0fb8bbb5@kujata>
References: <mailman.1973.1468381523.25613.users@lists.claws-mail.org>
 <02224eb6-bb9a-5abb-622d-30470c16f0ea@netspace.net.au>
 <20160715110024.756a174a@penny>
 <20160715120710.76b7bcfe@chris-main>
 <20160715130109.0fb8bbb5@kujata>
Message-ID: <20160715153531.77d821cf@bonifac.skk>

Ahoj,

Dňa Fri, 15 Jul 2016 13:01:09 +0100 Paul <claws at thewildbeast.co.uk>
napísal:

> On Fri, 15 Jul 2016 12:07:10 +0100
> Chris Hirst <claws-mail at fy3.co.uk> wrote: 
> 
> > So until now I have just put it down to something hinky on my
> > machine.
> 
> At the moment it still looks like that. See the debugging suggestions
> in the answer from Andrej.

And what about some AV software? On Windows it often acts as POP/IMAP
proxy, to scan incoming mails...

regards

-- 
Slavko
http://slavino.sk
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 455 bytes
Desc: Digitálny podpis OpenPGP
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160715/c0f8771b/attachment.sig>

From shannf at netspace.net.au  Sat Jul 16 14:58:13 2016
From: shannf at netspace.net.au (Frank Shann)
Date: Sat, 16 Jul 2016 22:58:13 +1000
Subject: [Users] Claws Windows 7 times out
In-Reply-To: <mailman.5.1468663201.29412.users@lists.claws-mail.org>
References: <mailman.5.1468663201.29412.users@lists.claws-mail.org>
Message-ID: <4d0f7cba-a1f8-e0d6-47b3-bde1e2307785@netspace.net.au>

Very interesting that others have this problem.
I'm running Norton Internet Security.
Thunderbird does not time out if I compact the folders frequently.

Frank Shann

On 16/07/2016 8:00 PM, users-request at lists.claws-mail.org wrote:
> Send Users mailing list submissions to
> 	users at lists.claws-mail.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.claws-mail.org/cgi-bin/mailman/listinfo/users
> or, via email, send a message with subject or body 'help' to
> 	users-request at lists.claws-mail.org
>
> You can reach the person managing the list at
> 	users-owner at lists.claws-mail.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Users digest..."
>
>
> Today's Topics:
>
>    1. Re: Claws Windows 7 times out (Chris Hirst)
>    2. Re: Claws Windows 7 times out (Paul)
>    3. Re: Claws Windows 7 times out (Slavko)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 15 Jul 2016 12:07:10 +0100
> From: Chris Hirst <claws-mail at fy3.co.uk>
> To: users at lists.claws-mail.org
> Subject: Re: [Users] Claws Windows 7 times out
> Message-ID: <20160715120710.76b7bcfe at chris-main>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi,
>
> I get timeouts a lot.
> Fifteen accounts, all POP3, claws 3.13.2, Linux Mint 17.3 64bit and ALL accounts on the same server of which I am the administrator/tech support etc. (it's a VPS running Exim on Centos 6.5).
>
> Sometimes it will go down the accounts and timeout every alternate one (the first one times out second okay or vice-versa) and so on.
>
> OR
>
> It may timeout the first then collect from the next two or three, timeout on one or two and so on. On the timeouts there is nothing logged at the server to show that it has even tried to connect. 
>
> OR
>
> It may timeout two or three, connect to the fourth one, timeout a few more
>
> extract from today's network log attached
>
>
> I have tested with ALL my local machines powered down, various devices such as smartphones tablets, one Linux box running bittorrent with various Linux distros, a local web development server, android tablet connected to Planet Rock radio stream with no significant differences noted.
>
> The same accounts have been tested on an Android tablet connected via local wireless, in the same sequence using POP3 and leaving messages on the server, all went through with no problem. So until now I have just put it down to something hinky on my machine.
>
> Thanks
> Chris Hirst
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: claws-log-2016-07-15
> Type: application/octet-stream
> Size: 3345 bytes
> Desc: not available
> URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160715/71ad9ed6/attachment-0001.obj>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 15 Jul 2016 13:01:09 +0100
> From: Paul <claws at thewildbeast.co.uk>
> To: users at lists.claws-mail.org
> Subject: Re: [Users] Claws Windows 7 times out
> Message-ID: <20160715130109.0fb8bbb5 at kujata>
> Content-Type: text/plain; charset=US-ASCII
>
> On Fri, 15 Jul 2016 12:07:10 +0100
> Chris Hirst <claws-mail at fy3.co.uk> wrote: 
>
>> So until now I have just put it down to something hinky on my
>> machine.
> At the moment it still looks like that. See the debugging suggestions
> in the answer from Andrej.
>
> with regards
>
> Paul
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 15 Jul 2016 15:35:31 +0200
> From: Slavko <linux at slavino.sk>
> To: users at lists.claws-mail.org
> Subject: Re: [Users] Claws Windows 7 times out
> Message-ID: <20160715153531.77d821cf at bonifac.skk>
> Content-Type: text/plain; charset="utf-8"
>
> Ahoj,
>
> D?a Fri, 15 Jul 2016 13:01:09 +0100 Paul <claws at thewildbeast.co.uk>
> nap?sal:
>
>> On Fri, 15 Jul 2016 12:07:10 +0100
>> Chris Hirst <claws-mail at fy3.co.uk> wrote: 
>>
>>> So until now I have just put it down to something hinky on my
>>> machine.
>> At the moment it still looks like that. See the debugging suggestions
>> in the answer from Andrej.
> And what about some AV software? On Windows it often acts as POP/IMAP
> proxy, to scan incoming mails...
>
> regards
>




From claws at thewildbeast.co.uk  Sun Jul 17 15:24:25 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Sun, 17 Jul 2016 14:24:25 +0100
Subject: [Users] shortcut for action
In-Reply-To: <20160712223305.4d32494a@workstation.bitcorner.intern>
References: <20160712223305.4d32494a@workstation.bitcorner.intern>
Message-ID: <20160717142425.514d63b5@kujata>

On Tue, 12 Jul 2016 22:33:05 +0200
Andreas Meyer <anmeyer at mailbox.org> wrote: 

> I remember there was the possibility to define a shortcut like
> ALT+G or something for an action like tail /home/andreas/.mysig >
> 
> Am I wrong or how do I create a shortcut like this?

http://www.claws-mail.org/faq/index.php/Interface#How_can_I_change_the_key-bindings_.28hot-keys.29_in_Claws_Mail.3F

with regards

Paul


From noreply at thewildbeast.co.uk  Tue Jul 19 09:11:26 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 19 Jul 2016 07:11:26 +0000
Subject: [Users] [Bug 3662] support configuration versioning
In-Reply-To: <bug-3662-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3662-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3662-595-gtf2iunXwE@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3662

Ricardo Mones <mones at users.sourceforge.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

--- Comment #1 from Ricardo Mones <mones at users.sourceforge.net> ---
Implemented in:

http://git.claws-mail.org/?p=claws.git;a=commit;h=3b5b4f75ddf190346e4e8a1ee4521f32cafd0a37

Thanks a lot Andrej! :-)

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Wed Jul 20 07:20:41 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Wed, 20 Jul 2016 05:20:41 +0000
Subject: [Users] [Bug 3638] GData Plugin fails after initial Google handshake
In-Reply-To: <bug-3638-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3638-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3638-595-cVecVAkJtv@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3638

--- Comment #8 from lbickley <lbickley at bickleywest.com> ---
Claws: version 3.13.2-154-g804af9
System Information
GTK+ 2.24.28 / GLib 2.42.2
Locale: en_US.UTF-8 (charset: UTF-8)
Operating System: Linux 3.16.6-2-desktop (x86_64)

This bug occurs long after Claws starts. I haven't been able to discover the
trigger for the bug - it just seems to be random. When it occurs, Claws hangs
until the Network Log is viewed (displaying the error below).

I posted this BUG on 4/11/16 - and it appears that no one is dealing with it.
I'm a strong supporter of Claws (including multiple $ donations) - but for some
reason, no one is owning this issue.

Regards, Lyle
------------------------------------------------------------------------------
* GData plugin: Starting async contacts query
*** GData plugin: Error querying for contacts: Authentication required:
<html><head><meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>Error
401
(Client Error)!!1</title>
<style type="text/css">
        *{margin:0;padding:0}html,code{font:15px/22px
arial,sans-serif}html{background:#fff;color:#222;padding:15px}body{background:url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAKsAAADVCAMAAAAfHvCaAAAAGFBMVEVYn%2BH%2F%2F%2F%2Bex%2B3U5vd7s%2Bfq8%2Fs0itq72PMLUPvtAAASvklEQVR4AbXBC0JqCQxEwT5Jd7L%2FHc8FdR4g%2BEGtEr8u%2FBHxu7otdzd%2FQPyqlmRp1Pw%2B8aukDfRa1fw28ZtWy4sa89vEb7LCi0zx28RvqgkvouW3id%2FU8pbtWmv5beJXRWNrRmp%2BnfhlHXZm%2BQPi95Vk%2FoD4fZbMHxC%2FryTzB8Tva435A%2BL3rcb8AfH7VjJ%2FQPy%2BHYk%2FIH5facwfEL8iaZcrnKyn%2BAPi57K2VL2WF1hJ%2FAHxQ2tJrg6HteXVjPkD4ge6V3J1%2BF97zhx%2BnXhWb8nacKXlnYPErxNPyfqw4ZYKVuUZdfhd4hmxunY73NICgfWMOvwm8ZQ1pMvlDZdaCic98kjV4beIp8ScpLvsSvhflzqQmqVLB281v0E8pc2bdNne8EayNTPNSbt02PBj4intcKltb%2FNibY%2BLf9aSO%2FyMeMo6XMva3g0vwrWsxvyMeEoc3knZ2g53ZaXa8DzxlHa4J23Jae5aycXTxFPa4WRdXAtdsivckZXG4TniKWtOSlre6y7LG651Wxq5OzxDPGUVIKNwX6ekCv%2B0ddglVPMM8ZQ10FJ4LGVvOEuXRl7OqnmGeEor4Ck%2BtnI1ZEvjDa%2FcPEM8ZQVY4RO9VqUlN%2F84PEM8JQ50cUgXH2mrKlyq5RniOQ4vVjPLHdu86OKGi2eIr%2BgNV6JwljmYO6zlbJsbWp4hPtVrjYpLLV7UHIp7rOVkixtaniE%2BU5I2Nc2FKJytZhTuiac5rLnh4hniEzUbDjXhn3g5W0nNA1aAKm7YPEN8bMecrZYLWl70hkcyBay5YfMM8aHI4aR7xAUVHyirOdhAmRsqniE%2BtOKsRjIXtDzmmRGHVmDFDRfPEB%2BJzMmO01xScdYnVRs6vPHMFG9W4ZrMM8RHouWw43DNhlDWiSVZY3nDoWYc3qzDNZlniPe6w4uoOFjcKhPXuJNWyG6VqjSuhm7%2BiZorUfEM8U5J8nKyMw0tcZLwPxdRtTlUcUgVdGlml0uZ4pqKZ4hr5VUnpSXdUgVa4hA5vHERV1Tp9XhdJTWHksYd%2Ftdarql4hrjQiaPiYLclNSeebVYz5o0W7Ghsa9blmlFtx01rxP8yy5XIPEP8L1W7bjWHlbzhRTwjzXrCK1f3qqSEyBysLVtayKp40yqurcITxJtUgavVHNob%2FinZTWt5VVvWVKvJSttQCkRjb%2FA4vLK5thOeIN6sm9ai5cTFhYRDy%2FyTGpdU0hxkaZvWUrZluTmLims14QniVbywClqgeouT9IZXNWoupGzNqHa3y5LGVYBnipbCSVxcq1meIN54oRXsbEk26S3NmBcZ807K3gon2ZLcxF5tPMVJprlWE54g3nihtbRHm7WjkbxTHSCWwj1r2U4HSMmdQEmWwonNtah4gnhjA9ZSaohmpnpDjWRptDwS25LcQGsc2Bla5sTFtZV4gnixpWmIVWpgRuVwsiV5q7kv0JJcNVIFapydUrHTQKa5IfMEcRKrurSQ0qhsmVR4kea%2B7pIr9NqSrRltWlaxomUgVVyLxBPEYeUGygtszew2KfOBclVpVN2ctCXNidZaaKWmONhc6rKaJwi6xuGkRmWpAkRa7outF9XN%2F7LlmbJmpiCyvBxk%2FtnSqHmGWGk5i2ZcaWBLau5KKHt3Ce%2FsaLMz46VG4cTFm%2FaMOzxFUYWztjzhkNI43JPyYvPAegPxzFRpOYmWF1WywrPUag5xjRapqqxxubijvYFVaC%2Fv7YSDpzxjzlbhpKXxhqcpWshqtECk0Yys6m5utZdD1LCuCifhfyVOapqsxhyiQMmSm58QNdZheZGV5FqwueXiZBUga28DvRte1NQCpQVSUkFqPbIr%2FIxg7arwJqqEg6e5Vuas1Zytyw1ka5uT9ajKI87WbksaLT8mbkXFyWqaa2rOVuFVStUNpGrDoSTPmDfWdlby8kPiHQtoa0vLpXU4WzX%2FS5W2gWxtOHQ24U3CSUmu8BPinR2XVSFyuNAOZ9Fyae1qDu2qcF8suRKeJt7pcW1zaE9xwcVZq7nWtpeTrQ0PrEeq8CTxnsWrlbThELra5ixqbsXWNoeq6nBft6TlOeK9VnG2lfb4TKOOlpOouKPsWg4pb3Nf1uMGusP3iDtKDaTcgMuWvL1FmZOouCtlbwJs1Yb7SuN2Nd8k7mgvXV4OKWALiGkVJ14eyPqQQG9Vc0dWGnn5LnFPTW1z1gW0OdSyag5aHsvaroVs1YZL2dKMt1nzXeKulas52QLanGy3xq4a87Eu2yHZ2uZNWzPjDbDmu8R9a8m7iQNscbKyy%2BWS%2BUzWtqp7qzpA1jPj8KKK7xIPZG2NVWTTSbpKbs5cfEF6y64qV6ctqcKbdvgm8VhSlnWwJbuaV3LzRb11onFt%2BKcVvkl8one7u3bD%2FzJuXnRt%2BFTXVHOWqubQ4rvEEyI1L1Z2h8%2B0eRHLKiBqvkk8IePmxZq1lk%2B0w0nJUHKIlm8ST8ioeVEFtFwbPhA3h8gcdpZV803iCRkVL7Y42bK2w0NlDqXlpJRV803iGZYrnFRxlqwO3eEuN4dSOGlVme8Sz7C37QZqeZPekl0b3nMBreKsp1bNN4lnWIEtF1Vc6i1bVZtwxQX0NC9UrfBN4hk7zaHLNrey1kgVLljATnO2rmj5JvEMqzlrF%2B%2BFXitcsAArnFkdLd8knrFqPmFzyQq0xUm0tJZvEs8oAR0eix0u1ARSqg70NNHyTeIZUqgZ85gdLlgcMjOSRlBqvkk8wwOSp3moJlyoCYfeKkmBVvgm8YyaUJJ5zOJSTXMWSgus%2BC7xjJpA%2BMiquVATXiUcSuGbxDNqmk%2BUxtW82WmurMI3iWd4wifaHo1rNxx2miul8E3iGTXhc4nH0lQ1O80VK3yTeEYNX5SspbEnXFmFbxLPqGm%2BrsvWFFdK4ZvEM2rCt6RmzCWL7xLP2Anfs2M3Fyy%2BSzyjpvmqDoed5YrFd4ln7DRftHI19BRXSuGbxDN6wtdEqjF4lisS3yWeEYUvWlkDNeZKTfgm8ZFu7mqFr%2FKMYae4lFH4JvGBVLgraghf09uQMZdabr5JfKC2q1zV3IgarOLLPMWllptvEo%2B1e7dkq5ZrLkip%2BKqa4lLk5ZvEY15INay9XIqXVGS%2BqsdcirzclYVa7hAPbQFVnJSaC9HCapavqjGXIjXvbNmSxi7eE4%2BsA21OumwuSQUJX1ZjLsVabqR6t7tUlrThhnjEC%2FFy6AKbCy45zdftmEutKm5UcSgHspY7XBEPVAFVHLoCUXPFkr3hi2wutba44QDr5iyeqQ3%2FiAccqOLQDhAV17pG0jZfUuZS5OJaGYiWF%2B2ypOV%2F4q5UQZtDu4G2xK10aeTlC1bhUslciQpYh7PSQtau8ErcVYZ4gXYDcUXLe1lrvBU%2B0VoutFRcWQWo4qwdTlYSr8Q9caDMwc3BDgl3xZpRb%2FORnuVCJHNlla2oOYmLQ8q7Ll6Ie6pgDaQKSCl8IF3WqAgPrbgU2VxpV1kje2EdoOWGlsOJuKMd1g14OdjNp1YjNY%2B0m0s15kYgJVlaFxBVOETuAOK9eEELrDmUli%2Fo8oy94S4Xl2LzQGukEFU46RptQLy3BWWgHSBTvEp32eGRtjTjSriQBKLlShUPrSRcnK2qtIB4Zw3tQNRAbF5FB0vhoS57JFXzZmUtuLiy5gNlTTixlkgB8Y4byhAX0HJ4Y%2FcmWkjz0NrSaMNJ5EiNi3%2FSpPlIayqA3UBcIG5tQTuwBcQOJx3AsrSzxHJ4bKs9U5xoqWnK4U17%2BUzPFLQ4iQ3iRtxQC3gBK5xZJjOutcaSpeYjsUZqKFmGOLxIaflU1jI2ZzuLuLGuLe2yBlrLC1tdWg7ZmWal8KHeGtXG0gLLSdZyha%2BoKYdDl7WIGxpbI7lSicyLqFkH2rVZF%2BwUnymNXNu8WUkVLqSaB6IpIGWXF3Ft1UC6rRq3mhc7TRXgLS2lrKb5VEoz6nCSrtE2V6p4aMeQ8tJaxLU4nGU9o%2BXVTrMF%2BLBgjYqvSNkjL%2BDxhmut5tDb3CF1uwJoEdday6vMTHjVs7GA3g3QU8tXxZJc6Q23yhxWckPCtZW1nLgQ12KFF5Ed3pQ0U7yKp%2Fi6YM%2FI4dZOA3FRRdvhSmaWMxtxI3JzVlP8k9qsVFWdbVvTfENCjcytUoBW46XscE3DizLi1o6KQ4%2FDlZRsWSfBCt%2BSdHGrzGHFOtjFtUgNNJQR78Qjr%2BVwzV4I65SazPJzrQbKq6bl5kapU7bbRryXLo3c3LATYIfMEs3yc1bA44bScqumvJ21jLgrhHdSktNWkONR%2BLmULMnbpQm3pOWkZxHf0R7NKKykDr9iq3ptuexOuJQRZ5lCfE96K5Ct5iNpe118WQKxVeGCxnYDmUL8iUjb2%2BXmexIu9Di9XtgpxJ9wcehuOzwt1gJx4ynEM9K9tS5X7fLempP2dmnDczwjTlLYi%2FiCnHXSe9LWic9k3qvlRTltLU%2Bp2lE1sKUG8bm2DiNpNBpJu5vwwuEdLa%2FWy6p4JL27Dg%2B0pUBsQHxu67C1Vb2dpLlU5h3bG87aS0vNXWtJtip0bbjDhqgB8TkvH1g115qttnfDoW0oNe%2B1Rs0hlqVRc8cSmYP4XBUfUXHNlQ5tqzkpNaXmHVV4lVpq1NxjhYP43JqP2FwracOh7OZQDuXmRmu5sjMO75SWE%2FE5F4%2F09s5wI5abQ0rFoVxZNTes7e7wvy053NpwJj7n4kVCDt29teWypJHFOy0VJ6sN0CrK4dpakmv5pxQeEZ8rQ%2B9alnU2knyo2k64Ix4vh5I5sVNarqW3u8z%2F4mkeEZ8LrCxXtbfWu9t8qqQK0DKHVtEubrWm%2BZ9VPCS%2BJN1828oB4gqwalrFtUjNP3bzkPg7sdXAyhyssF4upWb5Z8c8Jv5QWmpgVRxUsGoulMw%2FPQqPiZ%2Fp8JGVOLQWKAW6%2BCcyF2qGD4gfibe2ead5lXEDpQAu0rv8r2WgtZxl1Twm%2Ftls1HxHK7HDjZV51VIgWmBlSeMKr%2BxseZYXq%2BUx8aY0MxrvVnUC4XNxgYtrJY15taMmNlAztd0lhxfW6MChC1rFY%2BLVjlwzKutVdfhE7xjKXEiX3CuHFzWG0lLycogUXnTtxuaws6DiMfFK09kZQ9K1VSvJ3oRHslIFWuGftdzQUoWzlYONinBILRdaC8TTYPO%2F3nBFnKxLG2um%2BKfXOrg6vBdLrvJSCm9SJpy0RtucrMRq1Zy1woUy0B4HbN60ex0uiEN0KLk1xZXs2paKW9FIqrJrzP%2Fs5k17tJz0GE%2FxohwulGElOUTmTRWl5oI4lKRRsTPhVpIdc6sl10IsFW9WXNpROPH0TkGAVnFpx5a63WSKN5HVXBKwc1btEffsNO8kvBObS5lZTnaUMXFYqbnUltwg75h%2FusMVATXleWW7qk1Xb8KLVfiKlsIlj9Sc1FhFtjITboSTlSp8QMCO5JU11bb1ZlQdIHL4iprmktWROclqGlaWmvsSPiRAIy3lcAhk05vsWgfbU3xFVFyRWTUvSqqa2S7zHEFmRikt7yS18kxxFj6yY67UbNu86U6qIApPEUSasZb7Ek0DqXh5LHa4lDFWc6kd4uUpgsiaKR6pKQ61uHmsZrmyk1ZxpQ1oeYoAzaG4ry1zsuXisVJxpeQdc60N2DxFgGckc1ePixdpHkjVjrnS0kpc6u5SwMtTBKxkybUJN3bUfCaulsMVTVvNP%2BmyNQVe7tjlE%2BJFb1mSLVfV9jaHHS2fiao15sqOd4pL29ArbxXvldV8TPwv6XVV6YXtGTefiiqaMRei2TFXKpzUONxKFWo%2BJt5J0ltlzQxfsCqimSpv86KmrHApBbXA2s2NuKPwMfFQvOELWgvsnEjVQMYtc2UXqjm0xI0yq%2FAx8T0JtyJz8DiekWpjxWoupRqqOamp5VJPsXJt9256wz3iW8oOt1xNaWah3NZJZK7UAg6HLo%2B5tFPgke2SreUe8R1rO9xayTpALFaa2Z3mUhyo4qQ6I67MbLlsyyfFPeI71m7ey0orw2pL256WuFILVHOI41mu1IyK3u0q28094nvCXQHLtqyF9Gq5tA7E4bAViRsrNW%2FCXeK3lDTVVoBI4ZIDVHFYpbTcyIbPiF%2FTSbPT3SUtl6qAuDl4W8UzxC%2Fz6CRciALUcijT4inil%2FV2p4pLtUDcwCol8xTxF8KlKg5VQGtb4jniz7UbWAcox%2BJJ4s%2B5OLiAVnuKJ4m%2FtuawBURbszxL%2FLF4OXgh9s7yNPHHqjisgVLLPE%2F8rXYD7UCrVsXzxN%2Bq4uAGrFj8gPhTXRzKwGprmh8Qf2rlot2AvSp%2BQvyl1nikAlprh58Qf0lqolGBarX8iPhLZWBVqnVsfkb8pTaHcru61PyM%2BEtrDq2UW8sPib%2FUChBvbIcfEn%2FKxWGrpeWnxJ9qVYDyVPgp8bfa2qRmmh8Tf21lq5qfE38uveE3%2FAdr385%2FSVd%2FMAAAAABJRU5ErkJggg%3D%3D)
100% 5px no-repeat;margin:7% auto
0;max-width:390px;min-height:180px;padding:30px 0 15px}* >
body{padding-right:205px}p{margin:22px 0
0;overflow:hidden}ins,#g{text-decoration:none}ins{color:#777}a
img{border:0}#g{background:url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAJYAAAA3CAMAAADZn0ObAAABgFBMVEX%2F%2F%2F%2Fy1pHuLjfMm2W4yfA1TrPukgZDats3V8fwTEypjWy8u7oPsSWVsOoBdwwClhI%2FZdlasGjpOUOVlJjx0c20CyZpea36pAdIdebyu7COlqpYaql2hLH40Gn59vayuMlZiOunpqjYGy9wiNLd5PRqlOzzcmz%2Fwi4FpRrqsDisbm7O2O%2FKycrGfHmdo7CFmdPs7Ozz8%2FPIDSvcFC%2BTR0vCw8Xj5OTc3Nynvu7l6%2FfVjyw7Xc%2FSMT%2FZbgbT09NDbuHKz9BKf1Hr5ubiHTLt8vz%2Btxj1%2BOrT1txYedhLcNfwjYjTES6yq6r27Oqnq7NJZsiykpDNEiyxUVOTptiys7LNs6%2FhegO3p5L46MRveZiXcHBFXbY5dkLUysj0Pj9OfOjRS1JVZZzMrZGoXWCzKjn%2BrgpcdsflfIKh26frpKHJGzIqxDe4cC2AoOnOXl%2FYaWx204D4XVWsPEjRXwXqoRqYFSnN5dBhfMwZjipRaLvUmpk3x0SualZBXcJIV5A9nk5h34NHAAAJe0lEQVRo3u1YC1fa2BYGBBJA2lSeRjzyUKmQQgJNAoYhlJciiKJYHx2hYm2rre2140zHmem9f%2F3uE16JOpVZpcuuu%2B5eLpeSsPOdb3%2Fn2%2FtEp%2Ft%2FdAOV3%2F4L4tGj39DI3ynOp%2BznEP* 
---------------------------------------------------------------------------

-- 
You are receiving this mail because:
You are the assignee for the bug.


From gilweber at bellsouth.net  Wed Jul 20 17:33:20 2016
From: gilweber at bellsouth.net (Gil Weber)
Date: Wed, 20 Jul 2016 11:33:20 -0400
Subject: [Users] Replying to some links in an e-mail opens KMail rather than
 Claws-Mail
Message-ID: <20160720113320.2180e1ae@DB1>

Hello.

I have SuSE 13.2 and Claws-Mail 3.11.0 on my desktop computer.

I am having an odd issue when trying to reply to certain e-mails. These
will contain a person or entity's name in the body of the message.
You're supposed to be able to click there to reply by e-mail. However,
clicking on the name (an embedded link?) opens K-Mail rather than
Claws-Mail.

If I hover over the name I see the following: 

mailto: <name at xyz.com>

However, if I send myself a test message with any of my e-mail addresses
in the body of the message and I click on that, then Claws-Mail opens.
Just what I'd expect.

Note also that in these problematic e-mails if I hover over the person's
name, right click, and select "Open in Viewer" then Claws-Mail opens.
But if I hover, right click, and select "Open in Browser" then K-Mail
opens.

Thoughts? I do not use KMail, so how can I stop KMail from opening and
instead get Claws-Mail to open when the scenario I've described occurs?

Is deleting KMail the only solution?

Thanks!
Gil


From claws at thewildbeast.co.uk  Wed Jul 20 17:47:50 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Wed, 20 Jul 2016 16:47:50 +0100
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720113320.2180e1ae@DB1>
References: <20160720113320.2180e1ae@DB1>
Message-ID: <20160720164750.14fb8850@kujata>

On Wed, 20 Jul 2016 11:33:20 -0400
Gil Weber <gilweber at bellsouth.net> wrote: 

> However,
> clicking on the name (an embedded link?) opens K-Mail rather than
> Claws-Mail.

This will probably/possibly work:

Go to KDE's System Settings -> Personalisation -> Applications ->
Default applications -> Email Client

Choose 'Use a different email client' and put this in the box:

claws-mail --compose


with regards

Paul


From gilweber at bellsouth.net  Wed Jul 20 18:16:45 2016
From: gilweber at bellsouth.net (Gil Weber)
Date: Wed, 20 Jul 2016 12:16:45 -0400
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720164750.14fb8850@kujata>
References: <20160720113320.2180e1ae@DB1>
 <20160720164750.14fb8850@kujata>
Message-ID: <20160720121645.6debd0da@DB1>

On Wed, 20 Jul 2016 16:47:50 +0100
Paul <claws at thewildbeast.co.uk> wrote:

> On Wed, 20 Jul 2016 11:33:20 -0400
> Gil Weber <gilweber at bellsouth.net> wrote: 
> 
> > However,
> > clicking on the name (an embedded link?) opens K-Mail rather than
> > Claws-Mail.
> 
> This will probably/possibly work:
> 
> Go to KDE's System Settings -> Personalisation -> Applications ->
> Default applications -> Email Client
> 
> Choose 'Use a different email client' and put this in the box:
> 
> claws-mail --compose
> 
> 
> with regards
> 
> Paul


Paul, thanks for the reply. I don't seem to have the directions you
suggest for getting to "use a different email client," but
I think I am getting to where you suggest by the following: 

Configure Desktop (System Settings) > Default Applications > Choose the
default applications for various services > Email Client > Use a
different e-mail client. And there I have had the following 
displayed since I installed Claws-Mail quite some time ago:

claws-mail %u

I removed the %u and inserted --compose.

Unfortunately that didn't change anything.

I also tried removing the %u so that my selected email client simply
showed claws-mail. That also did not make any difference.

And I even tried inserting --compose after %u so that it read:

claws-mail %u --compose. 

Again, no difference.

Note: hovering over the original designation of claws-mail %u shows the
following:

%u: Full mailto: URL

Any other suggestions? 

Thank you. Your wise guidance is appreciated.
Gil


From andrej at kacian.sk  Wed Jul 20 18:23:33 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Wed, 20 Jul 2016 18:23:33 +0200
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720121645.6debd0da@DB1>
References: <20160720113320.2180e1ae@DB1> <20160720164750.14fb8850@kujata>
 <20160720121645.6debd0da@DB1>
Message-ID: <20160720182333.68e1cef9@penny>

On Wed, 20 Jul 2016 12:16:45 -0400
Gil Weber <gilweber at bellsouth.net> wrote:

> Any other suggestions? 

If you're trying to change what happens when you select "open in
browser", then you need to look at what *web browser* your KDE has set
as default, and determine what happens if that browser gets to act on a
mailto: URL.

Regards,
-- 
Andrej


From gilweber at bellsouth.net  Wed Jul 20 18:54:02 2016
From: gilweber at bellsouth.net (Gil Weber)
Date: Wed, 20 Jul 2016 12:54:02 -0400
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720182333.68e1cef9@penny>
References: <20160720113320.2180e1ae@DB1> <20160720164750.14fb8850@kujata>
 <20160720121645.6debd0da@DB1> <20160720182333.68e1cef9@penny>
Message-ID: <20160720125402.03610137@DB1>

On Wed, 20 Jul 2016 18:23:33 +0200
Andrej Kacian <andrej at kacian.sk> wrote:

> On Wed, 20 Jul 2016 12:16:45 -0400
> Gil Weber <gilweber at bellsouth.net> wrote:
> 
> > Any other suggestions? 
> 
> If you're trying to change what happens when you select "open in
> browser", then you need to look at what *web browser* your KDE has set
> as default, and determine what happens if that browser gets to act on
> a mailto: URL.
> 
> Regards,


Andrej, 

Firefox is set as the default browser for KDE.

In Firefox preferences under "Applications" the mailto is set as
"Use claws-mail."

So I think I have things properly configured -- unless there is a
setting somewhere I've missed.

Note also that in order to send e-mails from a visited Firefox website I
made an addition to about:config

I added <network.protocol-handler.app.mailto> as the name, <user set>
for the status, <string> for the type, and <claws-mail> for the string's
value (no < > characters of course). 

This I have found necessary in order to send an e-mail to a link in
Firefox. But could it also be the source of my problem with KMail
popping up when I click on a name in certain e-mails viewed in 
Claws-Mail?

Thanks!
Gil


From claws at thewildbeast.co.uk  Wed Jul 20 19:03:58 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Wed, 20 Jul 2016 18:03:58 +0100
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720125402.03610137@DB1>
References: <20160720113320.2180e1ae@DB1> <20160720164750.14fb8850@kujata>
 <20160720121645.6debd0da@DB1> <20160720182333.68e1cef9@penny>
 <20160720125402.03610137@DB1>
Message-ID: <20160720180358.3872126f@kujata>

On Wed, 20 Jul 2016 12:54:02 -0400
Gil Weber <gilweber at bellsouth.net> wrote: 

> But could it also be the source of my problem with KMail
> popping up when I click on a name in certain e-mails viewed in 
> Claws-Mail?

If those 'certain e-mails' are html messages, then have at a look at
the Fancy plugin's preferences, and for the option 'When clicking on
a link' set it to 'Do Nothing...'.

with regards

Paul


From abrolag at users.sourceforge.net  Wed Jul 20 19:13:10 2016
From: abrolag at users.sourceforge.net (Abrolag)
Date: Wed, 20 Jul 2016 18:13:10 +0100
Subject: [Users] Strange display flickering.
Message-ID: <20160720181310.589b8c94@debian>

Using debian testing and the supplied versions of Claws & Openbox.

At fairly random intervals, I get what seems to be very fast attempts to
redraw Claws windows when they are uncovered by another application's one
closing or moving. This results in only a partial redraw, and I have to scroll
the Claws one up then down again to clear the problem.

No other applications seem to have this problem.

-- 
W J G


From ricardo at mones.org  Wed Jul 20 19:15:46 2016
From: ricardo at mones.org (Ricardo Mones)
Date: Wed, 20 Jul 2016 19:15:46 +0200
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720121645.6debd0da@DB1>
References: <20160720113320.2180e1ae@DB1> <20160720164750.14fb8850@kujata>
 <20160720121645.6debd0da@DB1>
Message-ID: <20160720191546.3bd41b8c@busgosu>

On Wed, 20 Jul 2016 12:16:45 -0400
Gil Weber <gilweber at bellsouth.net> wrote:

> And I even tried inserting --compose after %u so that it read:
> 
> claws-mail %u --compose. 
> 
> Again, no difference.
> 
> Note: hovering over the original designation of claws-mail %u shows the
> following:
> 
> %u: Full mailto: URL
> 
> Any other suggestions?

FWIW in my KDE 4.x I have it as: /full/path/to/claws-mail --compose "%u"

(Full path is probably not required if you have claws-mail it in PATH)

best regards,
-- 
  Ricardo Mones 
  ~
  Absence of evidence is not evidence of absence.          Carl Sagan

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160720/1f031ebd/attachment.sig>

From andrej at kacian.sk  Wed Jul 20 19:40:42 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Wed, 20 Jul 2016 19:40:42 +0200
Subject: [Users] Strange display flickering.
In-Reply-To: <20160720181310.589b8c94@debian>
References: <20160720181310.589b8c94@debian>
Message-ID: <20160720194042.18db6398@penny>

On Wed, 20 Jul 2016 18:13:10 +0100
Abrolag <abrolag at users.sourceforge.net> wrote:

> Using debian testing and the supplied versions of Claws & Openbox.
> 
> At fairly random intervals, I get what seems to be very fast attempts to
> redraw Claws windows when they are uncovered by another application's one
> closing or moving. This results in only a partial redraw, and I have to scroll
> the Claws one up then down again to clear the problem.
> 
> No other applications seem to have this problem.
> 

Do you actually use other GTK2-based applications? I can't think of
anything in Claws Mail itself that could cause this. Do you have desktop
compositing enabled?

Regards,
-- 
Andrej


From andrej at kacian.sk  Wed Jul 20 19:57:43 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Wed, 20 Jul 2016 19:57:43 +0200
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720113320.2180e1ae@DB1>
References: <20160720113320.2180e1ae@DB1>
Message-ID: <20160720195743.03d611c4@penny>

On Wed, 20 Jul 2016 11:33:20 -0400
Gil Weber <gilweber at bellsouth.net> wrote:

> Note also that in these problematic e-mails if I hover over the person's
> name, right click, and select "Open in Viewer" then Claws-Mail opens.
> But if I hover, right click, and select "Open in Browser" then K-Mail
> opens.

Looks like I can reproduce it - it happens with mailto: links opened
via Fancy. Fancy seems to open the links using xdg-open program, and
that yields following output when run manually in a shell:

kf5.kio.core: "preferred service for x-scheme-handler/mailto" "kmail2"

I have no idea where kf5.kio.core gets that "preferred service" from.
My default mail client is set to claws-mail in System Settings.

Regards,
-- 
Andrej


From boxcars at gmx.net  Wed Jul 20 21:00:54 2016
From: boxcars at gmx.net (=?UTF-8?B?wrtRwqs=?=)
Date: Wed, 20 Jul 2016 14:00:54 -0500
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
References: <20160720113320.2180e1ae@DB1>
	<20160720195743.03d611c4@penny>
Message-ID: <20160720140054.253d133f@sepulchrave.remarqs>

On Wed, 20 Jul 2016 19:57:43 +0200
Andrej Kacian <andrej at kacian.sk> wrote:

> On Wed, 20 Jul 2016 11:33:20 -0400
> Gil Weber <gilweber at bellsouth.net> wrote:
> 
> > Note also that in these problematic e-mails if I hover over the
> > person's name, right click, and select "Open in Viewer" then
> > Claws-Mail opens. But if I hover, right click, and select "Open in
> > Browser" then K-Mail opens.  
> 
> Looks like I can reproduce it - it happens with mailto: links opened
> via Fancy. Fancy seems to open the links using xdg-open program, and
> that yields following output when run manually in a shell:
> 
> kf5.kio.core: "preferred service for x-scheme-handler/mailto" "kmail2"
> 
> I have no idea where kf5.kio.core gets that "preferred service" from.
> My default mail client is set to claws-mail in System Settings.

If 

$ xdg-mime query default x-scheme-handler/mailto

returns kmail2, it may help to try to change it with xdg-settings.  I'd
rather not give syntax for xdg-settings -- you're better off dealing
with its man page than with me, heh.




From andrej at kacian.sk  Wed Jul 20 21:06:23 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Wed, 20 Jul 2016 21:06:23 +0200
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720140054.253d133f@sepulchrave.remarqs>
References: <20160720113320.2180e1ae@DB1> <20160720195743.03d611c4@penny>
 <20160720140054.253d133f@sepulchrave.remarqs>
Message-ID: <20160720210623.35c7cfd2@penny>

On Wed, 20 Jul 2016 14:00:54 -0500
»Q« <boxcars at gmx.net> wrote:

> If 
> 
> $ xdg-mime query default x-scheme-handler/mailto
> 
> returns kmail2, it may help to try to change it with xdg-settings.  I'd
> rather not give syntax for xdg-settings -- you're better off dealing
> with its man page than with me, heh.

No, over here it doesn't print anything, just returns 4:

ticho at penny:~$ xdg-mime query default x-scheme-handler/mailto
ticho at penny:~$ echo $?
4

Regards,
-- 
Andrej


From boxcars at gmx.net  Wed Jul 20 21:25:44 2016
From: boxcars at gmx.net (=?UTF-8?B?wrtRwqs=?=)
Date: Wed, 20 Jul 2016 14:25:44 -0500
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
References: <20160720113320.2180e1ae@DB1> <20160720195743.03d611c4@penny>
 <20160720140054.253d133f@sepulchrave.remarqs>
 <20160720210623.35c7cfd2@penny>
Message-ID: <20160720142544.5a0b120a@sepulchrave.remarqs>

On Wed, 20 Jul 2016 21:06:23 +0200
Andrej Kacian <andrej at kacian.sk> wrote:

> On Wed, 20 Jul 2016 14:00:54 -0500
> »Q« <boxcars at gmx.net> wrote:
> 
> > If 
> > 
> > $ xdg-mime query default x-scheme-handler/mailto
> > 
> > returns kmail2, it may help to try to change it with xdg-settings.
> > I'd rather not give syntax for xdg-settings -- you're better off
> > dealing with its man page than with me, heh.  
> 
> No, over here it doesn't print anything, just returns 4:
> 
> ticho at penny:~$ xdg-mime query default x-scheme-handler/mailto
> ticho at penny:~$ echo $?
> 4

FWIW (maybe not anything) I get

$ xdg-mime query default x-scheme-handler/mailto
claws-mail.desktop

and clicking on a mailto link in a Fancy-rendered message opens a Claws
composition window for me.

I don't know how any of this works, so I won't give any advice.  All
I've ever done to set a default handler was go through KDE's system
settings as described earlier in the thread, once under KDE4 and then
again after moving to KDE5.



From andrej at kacian.sk  Wed Jul 20 21:46:12 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Wed, 20 Jul 2016 21:46:12 +0200
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720142544.5a0b120a@sepulchrave.remarqs>
References: <20160720113320.2180e1ae@DB1> <20160720195743.03d611c4@penny>
 <20160720140054.253d133f@sepulchrave.remarqs>
 <20160720210623.35c7cfd2@penny>
 <20160720142544.5a0b120a@sepulchrave.remarqs>
Message-ID: <20160720214612.609a12d0@penny>

On Wed, 20 Jul 2016 14:25:44 -0500
»Q« <boxcars at gmx.net> wrote:

> On Wed, 20 Jul 2016 21:06:23 +0200
> Andrej Kacian <andrej at kacian.sk> wrote:
> 
> > On Wed, 20 Jul 2016 14:00:54 -0500
> > »Q« <boxcars at gmx.net> wrote:
> >   
> > > If 
> > > 
> > > $ xdg-mime query default x-scheme-handler/mailto
> > > 
> > > returns kmail2, it may help to try to change it with xdg-settings.
> > > I'd rather not give syntax for xdg-settings -- you're better off
> > > dealing with its man page than with me, heh.    
> > 
> > No, over here it doesn't print anything, just returns 4:
> > 
> > ticho at penny:~$ xdg-mime query default x-scheme-handler/mailto
> > ticho at penny:~$ echo $?
> > 4  
> 
> FWIW (maybe not anything) I get
> 
> $ xdg-mime query default x-scheme-handler/mailto
> claws-mail.desktop
> 
> and clicking on a mailto link in a Fancy-rendered message opens a Claws
> composition window for me.
> 
> I don't know how any of this works, so I won't give any advice.  All
> I've ever done to set a default handler was go through KDE's system
> settings as described earlier in the thread, once under KDE4 and then
> again after moving to KDE5.

I think "kmail2" might be a builtin default value in KDE, if no other
handler is configured.

-- 
Andrej


From linux at slavino.sk  Wed Jul 20 21:49:24 2016
From: linux at slavino.sk (Slavko)
Date: Wed, 20 Jul 2016 21:49:24 +0200
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720142544.5a0b120a@sepulchrave.remarqs>
References: <20160720113320.2180e1ae@DB1> <20160720195743.03d611c4@penny>
 <20160720140054.253d133f@sepulchrave.remarqs>
 <20160720210623.35c7cfd2@penny>
 <20160720142544.5a0b120a@sepulchrave.remarqs>
Message-ID: <20160720214924.327d824f@bonifac.skk>

Ahoj,

Dňa Wed, 20 Jul 2016 14:25:44 -0500 »Q« <boxcars at gmx.net> napísal:

> On Wed, 20 Jul 2016 21:06:23 +0200
> Andrej Kacian <andrej at kacian.sk> wrote:
> 
> > On Wed, 20 Jul 2016 14:00:54 -0500
> > »Q« <boxcars at gmx.net> wrote:
> > 
> > > If 
> > > 
> > > $ xdg-mime query default x-scheme-handler/mailto
> > > 
> > > returns kmail2, it may help to try to change it with xdg-settings.
> > > I'd rather not give syntax for xdg-settings -- you're better off
> > > dealing with its man page than with me, heh.  
> > 
> > No, over here it doesn't print anything, just returns 4:
> > 
> > ticho at penny:~$ xdg-mime query default x-scheme-handler/mailto
> > ticho at penny:~$ echo $?
> > 4
> 
> FWIW (maybe not anything) I get
> 
> $ xdg-mime query default x-scheme-handler/mailto
> claws-mail.desktop
> 
> and clicking on a mailto link in a Fancy-rendered message opens a
> Claws composition window for me.
> 

AFAIK, in the DE (as GNOME, KDE or XFCE) the xdg-open try first the
DE's tools and only then uses XDG MIME, eg. in my XFCE it uses
exo-open. Then setting the MIME:

xdg-mime query default x-scheme-handler/mailto
claws-mail.desktop

grep claws-mail.desktop ~/.local/share/applications/mimeapps.list; echo $?
1
grep mailto ~/.local/share/applications/mimeapps.list
x-scheme-handler/mailto=exo-mail-reader.desktop

One can see, taht the results differs... It can be not useful in the
KDE. I was problem with HTML files/links (from okular), which i solved
by the keditfiletype, but when i try:

keditfiletype x-scheme-handler/mailto
keditfiletype(18084): Mimetype "x-scheme-handler/mailto" not found 

i am not KDE user and this error can be related... There must be some DE
tool to se default application in KDE for scheme handler.

-- 
Slavko
http://slavino.sk
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 455 bytes
Desc: Digitálny podpis OpenPGP
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160720/a42c072d/attachment.sig>

From anmeyer at mailbox.org  Wed Jul 20 22:08:32 2016
From: anmeyer at mailbox.org (Andreas Meyer)
Date: Wed, 20 Jul 2016 22:08:32 +0200
Subject: [Users] shortcut for action
In-Reply-To: <20160717142425.514d63b5@kujata>
References: <20160712223305.4d32494a@workstation.bitcorner.intern>
 <20160717142425.514d63b5@kujata>
Message-ID: <20160720220832.7d6cfe89@workstation.bitcorner.intern>

Paul <claws at thewildbeast.co.uk> schrieb am 17.07.16 um 14:24:25 Uhr:

> On Tue, 12 Jul 2016 22:33:05 +0200
> Andreas Meyer <anmeyer at mailbox.org> wrote: 
> 
> > I remember there was the possibility to define a shortcut like
> > ALT+G or something for an action like tail /home/andreas/.mysig >
> > 
> > Am I wrong or how do I create a shortcut like this?
> 
> http://www.claws-mail.org/faq/index.php/Interface#How_can_I_change_the_key-bindings_.28hot-keys.29_in_Claws_Mail.3F

That's what I was looking for. I love it!

> with regards
> 
> Paul

  Andreas


From abrolag at users.sourceforge.net  Wed Jul 20 22:19:58 2016
From: abrolag at users.sourceforge.net (Abrolag)
Date: Wed, 20 Jul 2016 21:19:58 +0100
Subject: [Users] Strange display flickering.
In-Reply-To: <20160720194042.18db6398@penny>
References: <20160720181310.589b8c94@debian>
	<20160720194042.18db6398@penny>
Message-ID: <20160720211958.4875f79e@debian>

On Wed, 20 Jul 2016 19:40:42 +0200
Andrej Kacian <andrej at kacian.sk> wrote:

> On Wed, 20 Jul 2016 18:13:10 +0100
> Abrolag <abrolag at users.sourceforge.net> wrote:
> 
> > Using debian testing and the supplied versions of Claws & Openbox.
> > 
> > At fairly random intervals, I get what seems to be very fast attempts to
> > redraw Claws windows when they are uncovered by another application's one
> > closing or moving. This results in only a partial redraw, and I have to scroll
> > the Claws one up then down again to clear the problem.
> > 
> > No other applications seem to have this problem.
> >   
> 
> Do you actually use other GTK2-based applications? I can't think of
> anything in Claws Mail itself that could cause this. Do you have desktop
> compositing enabled?
> 
> Regards,

Only ROX filer. I don't have a compositor, I use openbox for it's simplicity
and low overhead.

-- 
W J G


From silver.bullet at zoho.com  Wed Jul 20 23:20:04 2016
From: silver.bullet at zoho.com (Ralf Mardorf)
Date: Wed, 20 Jul 2016 23:20:04 +0200
Subject: [Users] Strange display flickering.
In-Reply-To: <20160720211958.4875f79e@debian>
References: <20160720181310.589b8c94@debian> <20160720194042.18db6398@penny>
 <20160720211958.4875f79e@debian>
Message-ID: <20160720232004.48a234f5@utnubu>

https://tracker.debian.org/pkg/gtk+3.0 is 3.20. Assumed you should
use a GTK2/GTK3 theme, it could be, that it is now broken for GTK2
app. I don't know if this could cause flickering. I don't think so, but
you never know. The upgrade from 3.18 to 3.20 has broken some GTK2/GTK3
themes, let alone that some GTK3 apps are discontinued.

On Arch Linux I needed to downgrade gnome-themes-standard, since
Adwaita became a PITA, but it doesn't flicker.

[rocketmouse at archlinux ~]$ grep gtk-theme .gtkrc-2.0
gtk-theme-name = "Adwaita"
[rocketmouse at archlinux ~]$ pacman -Q claws-mail-git openbox
claws-mail-git 3.13.2.r1.geb08800-1
openbox 3.6.1-3
[rocketmouse at archlinux ~]$ grep downg /var/log/pac*|grep gnome-t|head -n1
[2016-04-12 09:33] [ALPM] downgraded gnome-themes-standard (3.20-1 -> 3.18.0-1)

FWIW from a user's point of view, there's no big difference between
openbox and jwm. They are similar WMs, both are stable and I guess jwm
is more lightweight, than openbox. Consider to install it for testing
purpose.

Regards,
Ralf

-- 
Death of ROXTerm
https://sourceforge.net/p/roxterm/discussion/422638/thread/60da6975/



From claws-mail at fy3.co.uk  Thu Jul 21 13:36:19 2016
From: claws-mail at fy3.co.uk (Chris Hirst)
Date: Thu, 21 Jul 2016 12:36:19 +0100
Subject: [Users] Claws Windows 7 times out
In-Reply-To: <20160715153531.77d821cf@bonifac.skk>
References: <mailman.1973.1468381523.25613.users@lists.claws-mail.org>
 <02224eb6-bb9a-5abb-622d-30470c16f0ea@netspace.net.au>
 <20160715110024.756a174a@penny>
 <20160715120710.76b7bcfe@chris-main>
 <20160715130109.0fb8bbb5@kujata>
 <20160715153531.77d821cf@bonifac.skk>
Message-ID: <20160721123619.34e7c823@chris-main>

Hi,

No anti-virus
No anti-spyware
No firewall

Spamassassin on server not on local
Clam-AV on server not on local

Running Linux not Windows,

Tested with:

Different machine -- same OS, same claws config files and filter config files -- No change
TLS/SSL on and off -- both machines --- No change.

Swapped out network router -- Same machines -- No change

With Wireshark capture -- On 'connections' that fail -- Nothing recorded by Wireshark, tested on both machines and router combinations.



Conclusion: Probably not machine related.

Regards
Chris Hirst.


From noreply at thewildbeast.co.uk  Thu Jul 21 13:55:59 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 21 Jul 2016 11:55:59 +0000
Subject: [Users] [Bug 2929] Address auto-completion selection is not the
 same as highlighted
In-Reply-To: <bug-2929-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2929-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2929-595-1OFkqBvtYA@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2929

Abhay S. Kushwaha <clawsmail at kushwaha.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

--- Comment #1 from Abhay S. Kushwaha <clawsmail at kushwaha.com> ---
Somewhere along the line, this was resolved. So closing this.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From charlescurley at charlescurley.com  Thu Jul 21 14:32:35 2016
From: charlescurley at charlescurley.com (Charles Curley)
Date: Thu, 21 Jul 2016 06:32:35 -0600
Subject: [Users] vcalendar .tmp bug??
Message-ID: <20160721063235.112e39d9@jhegaala.localdomain>

I just got the following error message:

/home/charles/.claws-mail/vcalendar/.tmp: rename: Not a directory

** (claws-mail:24085): WARNING **: failed to write event.

/home/charles/.claws-mail/vcalendar/.tmp: rename: Not a directory

** (claws-mail:24085): WARNING **: failed to write event.

I then created .tmp as a directory (the rest already existed), and
claws-mail crashed. I got:

/home/charles/.claws-mail/vcalendar/.tmp: fopen: Is a directory
/home/charles/.claws-mail/vcalendar/.tmp: fopen: Is a directory
��D
/.tmp: fopen: No such file or directory
��D
/.tmp: rename: Not a directory

** (claws-mail:394): WARNING **: failed to write event.

*** Error in `claws-mail': malloc(): memory corruption (fast):
0x00000000045110c0 ***

[1]+  Aborted                 claws-mail

Claws-mail aborted without saving the state of windows, open draft
emails, etc.

root at jhegaala:~# lsb_release -a
No LSB modules are available.
Distributor ID:	Debian
Description:	Debian GNU/Linux 8.5 (jessie)
Release:	8.5
Codename:	jessie
root at jhegaala:~# pre vcalendar
claws-mail-vcalendar-plugin	3.11.1-3+deb8u1		amd64
root at jhegaala:~# 

I then removed the directory and did a "touch" on the file name. I
still get the error message. The file no longer exists.

Known bug??


-- 

The right of the people to be secure in their persons, houses, papers,
and effects, against unreasonable searches and seizures, shall not be
violated, and no Warrants shall issue, but upon probable cause,
supported by Oath or affirmation, and particularly describing the
place to be searched, and the persons or things to be seized.
-- U.S. Const. Amendment IV

Key fingerprint = CE5C 6645 A45A 64E4 94C0  809C FFF6 4C48 4ECD DFDB


From claws at thewildbeast.co.uk  Thu Jul 21 15:02:46 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Thu, 21 Jul 2016 14:02:46 +0100
Subject: [Users] vcalendar .tmp bug??
In-Reply-To: <20160721063235.112e39d9@jhegaala.localdomain>
References: <20160721063235.112e39d9@jhegaala.localdomain>
Message-ID: <20160721140246.5814c14f@kujata>

On Thu, 21 Jul 2016 06:32:35 -0600
Charles Curley <charlescurley at charlescurley.com> wrote: 

> I just got the following error message:
> 
> /home/charles/.claws-mail/vcalendar/.tmp: rename: Not a directory
> 
> ** (claws-mail:24085): WARNING **: failed to write event.
> 
> /home/charles/.claws-mail/vcalendar/.tmp: rename: Not a directory
> 
> ** (claws-mail:24085): WARNING **: failed to write event.


What did you do to trigger this?

Can you reproduce it with the latest release? (Yours is nearly 2
years old).

with regards

Paul


From gilweber at bellsouth.net  Thu Jul 21 15:52:34 2016
From: gilweber at bellsouth.net (Gil Weber)
Date: Thu, 21 Jul 2016 09:52:34 -0400
Subject: [Users] Replying to some links in an e-mail opens KMail rather
 than Claws-Mail
In-Reply-To: <20160720180358.3872126f@kujata>
References: <20160720113320.2180e1ae@DB1> <20160720164750.14fb8850@kujata>
 <20160720121645.6debd0da@DB1> <20160720182333.68e1cef9@penny>
 <20160720125402.03610137@DB1> <20160720180358.3872126f@kujata>
Message-ID: <20160721095234.112187ff@DB1>

On Wed, 20 Jul 2016 18:03:58 +0100
Paul <claws at thewildbeast.co.uk> wrote:

> On Wed, 20 Jul 2016 12:54:02 -0400
> Gil Weber <gilweber at bellsouth.net> wrote: 
> 
> > But could it also be the source of my problem with KMail
> > popping up when I click on a name in certain e-mails viewed in 
> > Claws-Mail?
> 
> If those 'certain e-mails' are html messages, then have at a look at
> the Fancy plugin's preferences, and for the option 'When clicking on
> a link' set it to 'Do Nothing...'.
> 
> with regards
> 
> Paul


Paul, thanks. FIXED!!

While in my Fancy preferences I do **not** have an option for 'Do
Nothing' I do have two other options:

1) Open in External Browser -- which is where Fancy was set,
2) Open in Viewer (Remote Content is Enable) -- which is the
setting I just changed to after reading your suggestion.

Making that change fixed the problem!  :o)   Now when I click on that
name in my e-mail it opens Claws-Mail rather than KMail.

Hopefully nothing else will be adversely affected by this change.

Thanks very much for solving my problem. 

Your help and those of others who made suggestions is greatly
appreciated.

Gil


From noreply at thewildbeast.co.uk  Thu Jul 21 16:34:34 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 21 Jul 2016 14:34:34 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-iLjCJXMbZ4@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

Ricardo Mones <mones at users.sourceforge.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
   Attachment #1667|0                           |1
        is obsolete|                            |

--- Comment #8 from Ricardo Mones <mones at users.sourceforge.net> ---
Created attachment 1668
  -->
http://www.thewildbeast.co.uk/claws-mail/bugzilla/attachment.cgi?id=1668&action=edit
Possible fix for this and Debian bug #712758 (v3)

Modified implementation taking advantage of config versioning.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From charlescurley at charlescurley.com  Thu Jul 21 17:08:12 2016
From: charlescurley at charlescurley.com (Charles Curley)
Date: Thu, 21 Jul 2016 09:08:12 -0600
Subject: [Users] vcalendar .tmp bug??
In-Reply-To: <20160721140246.5814c14f@kujata>
References: <20160721063235.112e39d9@jhegaala.localdomain>
 <20160721140246.5814c14f@kujata>
Message-ID: <20160721090812.6d32901d@jhegaala.localdomain>

On Thu, 21 Jul 2016 14:02:46 +0100
Paul <claws at thewildbeast.co.uk> wrote:

> What did you do to trigger this?

Sorry, I should have said. Opened an email consisting entirely of a
vcalendar event.

> 
> Can you reproduce it with the latest release? (Yours is nearly 2
> years old).

Not easily. I would have to compile it. I am traveling and dependent on
hotel quality networking. Maybe next week.



-- 

The right of the people to be secure in their persons, houses, papers,
and effects, against unreasonable searches and seizures, shall not be
violated, and no Warrants shall issue, but upon probable cause,
supported by Oath or affirmation, and particularly describing the
place to be searched, and the persons or things to be seized.
-- U.S. Const. Amendment IV

Key fingerprint = CE5C 6645 A45A 64E4 94C0  809C FFF6 4C48 4ECD DFDB


From noreply at thewildbeast.co.uk  Thu Jul 21 17:13:14 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 21 Jul 2016 15:13:14 +0000
Subject: [Users] [Bug 2975] Implement setting -0000 timezone to hide sender
	localtime
In-Reply-To: <bug-2975-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2975-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2975-595-UH6ivEpxeD@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2975

--- Comment #1 from Ricardo Mones <mones at users.sourceforge.net> ---
Created attachment 1669
  -->
http://www.thewildbeast.co.uk/claws-mail/bugzilla/attachment.cgi?id=1669&action=edit
Possible implementation with hidden pref.

Documentation of new hidden pref to be done after code is settled ;-)

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Thu Jul 21 17:42:49 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 21 Jul 2016 15:42:49 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-yWxwM11Izr@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

--- Comment #9 from Andrej Kacian <andrej at kacian.sk> ---
I thought case 1 should come after case 0 in a switch(), not before, and the
indentation inside case 1 code looks a bit iffy (mixed tabs and spaces), but
apart from that, the patch looks good to me (and works well). :)

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Thu Jul 21 22:02:51 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 21 Jul 2016 20:02:51 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-4ZaG6Ram0c@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

--- Comment #10 from Ricardo Mones <mones at users.sourceforge.net> ---
(In reply to comment #9)
> I thought case 1 should come after case 0 in a switch(), not before, and the
> indentation inside case 1 code looks a bit iffy (mixed tabs and spaces), but
> apart from that, the patch looks good to me (and works well). :)

Oops, I hadn't realized of the inverse order. For some reason I saw it like a
stack of changes and seemed natural to put new versions on top of older, but no
problem in reversing it and fixing indentation.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From larry at jaffeworld.net  Thu Jul 21 22:40:58 2016
From: larry at jaffeworld.net (Larry Jaffe)
Date: Thu, 21 Jul 2016 16:40:58 -0400
Subject: [Users] filtering and bsfilterw on windows port
Message-ID: <20160721164058.000044c4@jaffeworld.net>

Hello everyone.  I am new to claws-mail and am having much difficulty
getting filtering to work automatically.  I have followed the manual
and set up a filter to move certain mails into a folder.  I am setup to
check mail every few minutes or so and I have checked the box to filter
mail upon receipt.  However, the filter does not get applied when mail
is received.  I have to manually run the filter in order for it to
be applied.  I'm sure I'm missing something simple, but I've been
through the manual, all the settings, the FAQ, and I've reviewed the
mailing lists going back as far as January.  There's been no mention of
this issue so I'm guessing I must be missing something simple.

Also, I have bsfilter set up but it isn't moving mail to my spam
filter.  However, I saw the post from last month about the issue with
this, so I am waiting patiently for the next release to come out with
the fix.

FYI, I am using the windows port on windows 10 and using an IMAP
service.  

-- 
Respectfully,

Larry Jaffe


From andrej at kacian.sk  Thu Jul 21 23:10:35 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Thu, 21 Jul 2016 23:10:35 +0200
Subject: [Users] filtering and bsfilterw on windows port
In-Reply-To: <20160721164058.000044c4@jaffeworld.net>
References: <20160721164058.000044c4@jaffeworld.net>
Message-ID: <20160721231035.18d30c3a@penny>

On Thu, 21 Jul 2016 16:40:58 -0400
Larry Jaffe <larry at jaffeworld.net> wrote:

> Hello everyone.  I am new to claws-mail and am having much difficulty
> getting filtering to work automatically.  I have followed the manual
> and set up a filter to move certain mails into a folder.  I am setup to
> check mail every few minutes or so and I have checked the box to filter
> mail upon receipt.  However, the filter does not get applied when mail
> is received.  I have to manually run the filter in order for it to
> be applied.  I'm sure I'm missing something simple, but I've been
> through the manual, all the settings, the FAQ, and I've reviewed the
> mailing lists going back as far as January.  There's been no mention of
> this issue so I'm guessing I must be missing something simple.

Hi, try enabling filtering log (Other->Logging page in preferences),
and then, after you receive some messages, look at the log (look in
main window's Tools menu).

Also, make sure that filtering on receive is enabled in your account's
preferences, on Receive page.

> Also, I have bsfilter set up but it isn't moving mail to my spam
> filter.  However, I saw the post from last month about the issue with
> this, so I am waiting patiently for the next release to come out with
> the fix.

Yes, most likely it is the same issue as previously discussed.
Hopefully it will be fixed in next release, in a few weeks.

Regards,
-- 
Andrej


From larry at jaffeworld.net  Thu Jul 21 23:52:33 2016
From: larry at jaffeworld.net (Larry Jaffe)
Date: Thu, 21 Jul 2016 17:52:33 -0400
Subject: [Users] filtering and bsfilterw on windows port
In-Reply-To: <20160721231035.18d30c3a@penny>
References: <20160721164058.000044c4@jaffeworld.net>
 <20160721231035.18d30c3a@penny>
Message-ID: <20160721175233.000078e8@jaffeworld.net>

Thanks for the rapid reply Andrej.  

Logging has been turned on from day 1, apparently and the only mention
of filtering in the log is for bsfilter.  I double-checked and filter
on receive is enabled.

I peeked into clawsrc and I see that:

ask_apply_per_account_filtering_rules=1
apply_per_account_filtering_rules=2


Do those settings look correct?

-- 
Respectfully,

Larry Jaffe

-----------------------------

> On Thu, 21 Jul 2016 16:40:58 -0400
> Larry Jaffe <larry at jaffeworld.net> wrote:
> 
> > Hello everyone.  I am new to claws-mail and am having much
> > difficulty getting filtering to work automatically.  I have
> > followed the manual and set up a filter to move certain mails into
> > a folder.  I am setup to check mail every few minutes or so and I
> > have checked the box to filter mail upon receipt.  However, the
> > filter does not get applied when mail is received.  I have to
> > manually run the filter in order for it to be applied.  I'm sure
> > I'm missing something simple, but I've been through the manual, all
> > the settings, the FAQ, and I've reviewed the mailing lists going
> > back as far as January.  There's been no mention of this issue so
> > I'm guessing I must be missing something simple.  
> 
> Hi, try enabling filtering log (Other->Logging page in preferences),
> and then, after you receive some messages, look at the log (look in
> main window's Tools menu).
> 
> Also, make sure that filtering on receive is enabled in your account's
> preferences, on Receive page.
> 
> > Also, I have bsfilter set up but it isn't moving mail to my spam
> > filter.  However, I saw the post from last month about the issue
> > with this, so I am waiting patiently for the next release to come
> > out with the fix.  
> 
> Yes, most likely it is the same issue as previously discussed.
> Hopefully it will be fixed in next release, in a few weeks.
> 
> Regards,
> -- 
> Andrej
> _______________________________________________
> Users mailing list
> Users at lists.claws-mail.org
> http://lists.claws-mail.org/cgi-bin/mailman/listinfo/users


-- 
Respectfully,

Larry Jaffe


From ftdorado at ono.com  Fri Jul 22 23:24:57 2016
From: ftdorado at ono.com (Felipe T. Dorado)
Date: Fri, 22 Jul 2016 23:24:57 +0200
Subject: [Users] Migrate to new installation, extract attachments
Message-ID: <20160722232457.6c7dd375@aguacate.fruta2.org>

Hello  : )

I've successfully migrated my mail and ClawsMail configs to a new
installation of Debian Linux 7.8. 
I have done this before and it has worked perfectly. The way to do it is
simple:

	- install clawsmail anew, with apt-get, Synaptic or whatever you
	  use.
	- copy  old /home/user/.clawsmail to the new /home/user
	- copy the whole old /Mail to the new /home/user directory.

And that's it. I have my new clawsmail working as usual : )  Great!

Is that _the_ way to do it or is there a better way?


Now, I wanted to extract the attachments received, to archive 
externally and save that on good old Sylpheed/ClawsMail.
I found the script [1] Holger Berndt sent to this list on Apr 20 2013 [2]
and tried it. 

I told it to:

$ ./extract_attachments_from_claws.py --all-content-types
--recursive /home/philip/Mail /home/philip/Mail/attaches 

It works well on some folders although not an the main Mail folder. Like
Philippe Gramoullé says on Tue Apr 23 2013 [3] I also get more or less the
same errors:

Traceback (most recent call last):
  File "./extract_attachments_from_claws.py", line 170, in <module>
    sys.exit(main())
  File "./extract_attachments_from_claws.py", line 166, in main
    extract_attachments(args.mime_filename, args.target_directory[0],
args.content_type, args.subfolder_by_sender, args.recursive)
  File "./extract_attachments_from_claws.py", line 125, in
extract_attachments
    mime_file.extract(target_dir, patterns)
  File "./extract_attachments_from_claws.py", line 70, in extract
    os.makedirs(target_directory)
  File "/usr/lib/python2.7/os.py", line 157, in makedirs
    mkdir(name, mode)
OSError: [Errno 13] Permission denied: '/Licor'

That last error is about one of the folders which I have checked has the
same owner and permissions of the rest of them under Mail. That is I am the
owner, the individual files have rw and all the subfolders have permissions
drwxr-xr-x 16 philip philip  4096 feb 22 10:56 Licor.

If my command is:

$ ./extract_attachments_from_claws.py --all-content-types
--recursive /home/philip/Mail/Entrada /home/philip/Mail/attaches/Entrada

Then it creates the folder Entrada although the errors are the same but for
the last two:
 
   File "./extract_attachments_from_claws.py", line 102, in extract
   fp.write(part.get_payload(decode=True))  
TypeError: must be string or buffer, not None

I'm afraid I'm not able to figure out what wrong in this case so I ask for
help in finding out what gives. I would like to run this script once a
month, for instance, to alleviate the weight of the Mail folder.

Thank you Holger, thank you Philippe, thank you All.

Felipe  : )


[1] URL: http://lists.claws-mail.org/pipermail/users/attachments/20130420/0248a802/attachment.py
[2] http://claws-mail.org/pipermail/users/2013-April/006036.html
[3] http://claws-mail.org/pipermail/users/2013-April/006044.html




From silver.bullet at zoho.com  Sat Jul 23 00:31:11 2016
From: silver.bullet at zoho.com (Ralf Mardorf)
Date: Sat, 23 Jul 2016 00:31:11 +0200
Subject: [Users] Migrate to new installation, extract attachments
In-Reply-To: <20160722232457.6c7dd375@aguacate.fruta2.org>
References: <20160722232457.6c7dd375@aguacate.fruta2.org>
Message-ID: <20160723003111.529d3338@utnubu>

On Fri, 22 Jul 2016 23:24:57 +0200, Felipe T. Dorado wrote:
>	- copy  old /home/user/.clawsmail to the new /home/user
>	- copy the whole old /Mail to the new /home/user directory.
>
>And that's it. I have my new clawsmail working as usual : )  Great!
>
>Is that _the_ way to do it or is there a better way?

That's the way to do it.

However, it's important to know how the copy command works. While
globbing shouldn't be an issue, the uid could be one, depending from
were you copy, since the uid not necessarily is always 1000. IOW
it should be considered to copy with root privileges and the -p
option. I would use the -p option anyway,
"-p same as --preserve=mode,ownership,timestamps".

So the copy command after su or sudo would be

  cp -pr /path/of/old/dir/ /path/to/new/

Assumed you're using a plugin, you might need to copy additional
directories/files. I for example use bogofilter to sort out spam. The
directory to copy is ~/.bogofilter/.

Regards,
Ralf



From noreply at thewildbeast.co.uk  Thu Jul 21 22:02:51 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Thu, 21 Jul 2016 20:02:51 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-qvg2nHkg1n@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

--- Comment #11 from users at lists.claws-mail.org ---
Changes related to this bug have been committed.
Please check latest Git and update the bug accordingly.
You can also get the patch from:
http://git.claws-mail.org/

++ ChangeLog    2016-07-23 03:04:02.908407091 +0200
http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=f6b41c373f554fc2e5ce8185f16946b2bb256a65
Merge: 4e79761 72a45f9
Author: Colin Leroy <colin at colino.net>
Date:   Sat Jul 23 03:04:02 2016 +0200

    Merge branch 'master' of file:///home/git/claws

http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=72a45f97e63a1f8f19adef80dc197a917207f7e1
Author: Ricardo Mones <ricardo at mones.org>
Date:   Sat Jul 23 03:00:00 2016 +0200

    Update copyright headers for previous commit

http://git.claws-mail.org/?p=claws.git;a=commitdiff;h=bc779dcb02bc8bc8653dfc5201dcfecc457bd971
Author: Ricardo Mones <ricardo at mones.org>
Date:   Sat Jul 23 02:59:21 2016 +0200

    Fix bug #2176: autochk_interval granularity is low

    This also fixes Debian bug “Please increase mail auto check period.”
    See: https://bugs.debian.org/712758

    Former bug wanted sub-minute granularity and latter the opposite: just
    check a few times a day, so this allows user to specify also hours and
    seconds in addition to existing minutes to address both requests.

    Checking range was from 1 minute to 1 hour 40 minutes and now is
    extended to a range from 10 seconds to 100 hours minus one second.

    Default for new configurations is preserved (10 minutes).

    Configuration version is raised to 2 for migrating existing values
    from minutes to seconds.

-- 
You are receiving this mail because:
You are the assignee for the bug.

From noreply at thewildbeast.co.uk  Sat Jul 23 14:49:07 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Sat, 23 Jul 2016 12:49:07 +0000
Subject: [Users] [Bug 2080] Support for user+subaddress@domain.tld format
In-Reply-To: <bug-2080-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2080-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2080-595-lmUS4WrmEq@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2080

Pierre Fortin <pf at pfortin.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |PATCHESWELCOME

--- Comment #8 from Pierre Fortin <pf at pfortin.com> ---

WORKAROUND:

This workaround does not track account changes; but works otherwise.

Folder->Properties->Templates [Compose|Reply|Forward]
   [X] Use template when {composing new,replying to,forwarding} messages 
  From:  user+subaddress at domain.tld

-- 
You are receiving this mail because:
You are the assignee for the bug.


From ftdorado at ono.com  Sun Jul 24 13:47:01 2016
From: ftdorado at ono.com (Felipe T. Dorado)
Date: Sun, 24 Jul 2016 13:47:01 +0200
Subject: [Users] Migrate to new installation, extract attachments
In-Reply-To: <20160723003111.529d3338@utnubu>
References: <20160722232457.6c7dd375@aguacate.fruta2.org>
 <20160723003111.529d3338@utnubu>
Message-ID: <20160724134701.23a49a1c@aguacate.fruta2.org>

Hello Ralf  : )

On Sat, 23 Jul 2016 00:31:11 +0200, Ralf wrote:

RM> >	- copy  old /home/user/.clawsmail to the new /home/user
RM> >	- copy the whole old /Mail to the new /home/user directory.
RM> >
RM> >And that's it. I have my new clawsmail working as usual : )  Great!
RM> >
RM> >Is that _the_ way to do it or is there a better way?
RM> 
RM> That's the way to do it.

Thank you.

RM> So the copy command after su or sudo would be
RM> 
RM>   cp -pr /path/of/old/dir/ /path/to/new/

You're absolutely right. I did copy the Mail directory properly so that
permisssions were correct. I think I did it troght mc preserving
permissions. But your suggestion makes it even simpler.

RM> Assumed you're using a plugin, you might need to copy additional
RM> directories/files. I for example use bogofilter to sort out spam. The
RM> directory to copy is ~/.bogofilter/.

And yes, I forgot about what bogofilter had learned  : (  I've done as you
suggest and copied ~/.bogofilter/. too. Thank you again.


As for the attachments I have only managed to extract individual
directories so far. As I have about 80! I'm still learning how to best do
it. I hope someone can have a look at Holger's script and suggest how to do
it.

Have a nice summer.

Felipe  : )


From claws.users at i.lucanops.net  Sun Jul 24 18:26:21 2016
From: claws.users at i.lucanops.net (Nick)
Date: Sun, 24 Jul 2016 17:26:21 +0100
Subject: [Users] Encrypt by default, to one or select users
Message-ID: <20160724172621.4373ec00@roadkill.i.lucanops.net>

Hey everyone

I'm trying to figure out a way to send encrypted emails, by default, to
a specific email address.

I've got GPG working nicely, but it would be convenient to not have to
pick "options -> encrypt" in new emails to certain people in my address
book. It'd help with privacy, too, I've just done that send, whoops
thing. It's been close in the past, but today got it wrong.

Cheers
Nick


Claws Mail version 3.11.1
GTK+ 2.24.25 / GLib 2.42.1
Locale: en_GB.UTF-8 (charset: UTF-8)
Operating System: Linux 3.16.0-4-686-pae (i686)
Debian Jessie


From sylpheed at 911networks.com  Mon Jul 25 22:12:04 2016
From: sylpheed at 911networks.com (sylpheed at 911networks.com)
Date: Mon, 25 Jul 2016 13:12:04 -0700
Subject: [Users] shortcuts for switching windows
Message-ID: <20160725131204.4f9347df@frogguski.911networks.com>

Hi,

CM 3.13.2. Is there some key to switch between the various panes,
message, message list and folders? 

I prefer to use the keyboard instead of the mouse (shoulder injury...)

Thanks

-- 
sknahT

vyS


From rol at witbe.net  Tue Jul 26 08:08:30 2016
From: rol at witbe.net (Paul Rolland (=?UTF-8?B?44Od44O844Or44O744Ot44Op44Oz?=))
Date: Tue, 26 Jul 2016 08:08:30 +0200
Subject: [Users] shortcuts for switching windows
In-Reply-To: <20160725131204.4f9347df@frogguski.911networks.com>
References: <20160725131204.4f9347df@frogguski.911networks.com>
Message-ID: <20160726080830.3ad0a2e1@riri.DEF.witbe.net>

Hello,

On Mon, 25 Jul 2016 13:12:04 -0700
sylpheed at 911networks.com wrote:

> CM 3.13.2. Is there some key to switch between the various panes,
> message, message list and folders? 
> 
> I prefer to use the keyboard instead of the mouse (shoulder injury...)

On my installation, <TAB> does the job.

I haven't seem that bound to any item in the menu, so I guess is not a
specific settings I made. It should work for you...

Best,
Paul
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160726/f513a4b5/attachment.sig>

From ricardo at mones.org  Tue Jul 26 10:03:07 2016
From: ricardo at mones.org (Ricardo Mones)
Date: Tue, 26 Jul 2016 10:03:07 +0200
Subject: [Users] shortcuts for switching windows
In-Reply-To: <20160726080830.3ad0a2e1@riri.DEF.witbe.net>
References: <20160725131204.4f9347df@frogguski.911networks.com>
 <20160726080830.3ad0a2e1@riri.DEF.witbe.net>
Message-ID: <20160726080307.GQ22376@busgosu.mones.org>

On Tue, Jul 26, 2016 at 08:08:30AM +0200, Paul Rolland (ポール・ロラン) wrote:
> Hello,
> 
> On Mon, 25 Jul 2016 13:12:04 -0700
> sylpheed at 911networks.com wrote:
> 
> > CM 3.13.2. Is there some key to switch between the various panes,
> > message, message list and folders? 
> > 
> > I prefer to use the keyboard instead of the mouse (shoulder injury...)
> 
> On my installation, <TAB> does the job.

And Shift-<Tab> should work also, but reversing order.

> I haven't seem that bound to any item in the menu, so I guess is not a
> specific settings I made. It should work for you...

If memory serves these are GTK+ defaults for widget navigation.

regards,
-- 
  Ricardo Mones 
  ~
  Absence of evidence is not evidence of absence.          Carl Sagan

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160726/7a8fe9ef/attachment.sig>

From noreply at thewildbeast.co.uk  Tue Jul 26 14:18:05 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 26 Jul 2016 12:18:05 +0000
Subject: [Users] [Bug 1408] IDLE-Support with libEtPan (since 0.52)
In-Reply-To: <bug-1408-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-1408-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-1408-595-WVlE3l1UD1@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=1408

--- Comment #29 from Larry J <larry at jaffeworld.net> ---
I vote for reopening.  I much prefer this method rather than checking every few
moments.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 26 14:39:59 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 26 Jul 2016 12:39:59 +0000
Subject: [Users] [Bug 1408] IDLE-Support with libEtPan (since 0.52)
In-Reply-To: <bug-1408-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-1408-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-1408-595-MeFJJNwVUt@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=1408

Andrej Kacian <andrej at kacian.sk> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
         Resolution|WONTFIX                     |PATCHESWELCOME

--- Comment #30 from Andrej Kacian <andrej at kacian.sk> ---
This is not a voting platform. Votes don't mean anything. Code does.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 26 14:55:16 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 26 Jul 2016 12:55:16 +0000
Subject: [Users] [Bug 1408] IDLE-Support with libEtPan (since 0.52)
In-Reply-To: <bug-1408-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-1408-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-1408-595-7NqQCYqk5j@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=1408

--- Comment #31 from Michael Rasmussen <mir at datanom.net> ---
(In reply to comment #29)
> I vote for reopening.  I much prefer this method rather than checking every
> few moments.

I have been looking into this in the past but since claws is not using a
threaded architecture it is not easy to do this. This reason for this is that
IDLE needs a shared environment to prevent out of order protocol request/reply
which is not possible with claws' current state of code. Out of order protocol
request/reply will stop the communication flow until RSET is sent in which case
the communication will have to start over again.

NOTIFY seems be technically possible so in the event of me having free time I
might through in some time for this.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From noreply at thewildbeast.co.uk  Tue Jul 26 20:03:14 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Tue, 26 Jul 2016 18:03:14 +0000
Subject: [Users] [Bug 2176] autochk_interval granularity is low
In-Reply-To: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-2176-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-2176-595-5dG6q1Kgvr@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=2176

Ricardo Mones <mones at users.sourceforge.net> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |FIXED

-- 
You are receiving this mail because:
You are the assignee for the bug.


From pf at pfortin.com  Wed Jul 27 18:00:03 2016
From: pf at pfortin.com (Pierre Fortin)
Date: Wed, 27 Jul 2016 12:00:03 -0400
Subject: [Users] Only include selected folders...
Message-ID: <20160727120003.79debb6e@pfortin.com>

Hi devs,

Being curious about this option in Prefs->Notification:

 [ ]  Set window manager urgency hint when {new,unread} messages exist

I turned one (new) on.  Initially, this seemed like a good thing; but
then noticed the "hint" was always there.  From my initial testing, it
appears that the hint does not respect the "Only include selected
folders..." option of SysTrayIcon.

Wouldn't it make more sense to move the folder selection to the
Notification level and have the "hints" options and SysTrayIcon share
that information?

Cheers,
Pierre


From peter_s_d at fastmail.com.au  Thu Jul 28 12:09:19 2016
From: peter_s_d at fastmail.com.au (blind Pete)
Date: Thu, 28 Jul 2016 20:09:19 +1000
Subject: [Users] [Bug 3660] SSL Cert change shown on previously accepted
 certificates.
In-Reply-To: <20160714080306.41c292d6@kujata>
References: <bug-3660-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
 <bug-3660-595-nMbXgrI6jj@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
 <20160714140522.532f0295@PPlive> <20160714080306.41c292d6@kujata>
Message-ID: <20160728200919.366cb421@PPlive>

On Thu, 14 Jul 2016 08:03:06 +0100
Paul <claws at thewildbeast.co.uk> wrote:

> On Thu, 14 Jul 2016 14:05:22 +1000
> blind Pete <peter_s_d at fastmail.com.au> wrote: 
> 
> > Are you referring to, 
> > 
> >     skip_ssl_cert_check 
> > 
> >     Disables the verification of SSL certificates when set 
> >     to '1'.  Default value is '0'.
> > 
> > or to, 
> > 
> >     unsafe_ssl_certs
> > 
> >     Allows Claws Mail to remember multiple SSL certificates 
> >     for a given server/port when set to '1'. This is disabled 
> >     by default ('0'). 
> 
> Clearly it was the latter which was being referred to - it is named
> explicitly.
> 
> 
> > The name "unsafe_ssl_certs" suggests that it refers to SSL certs for
> > wildcarded URLs (problem one), but the text describes problem two,
> > which in my limited understanding is a non-problem.  
> 
> As the name alone cannot give a full explanation, the text is added
> to describe the function of the option. Whatever an option name
> leads you to believe, there is no need to doubt the accompanying
> text.  
> 
> with regards
> 
> Paul

I did not express myself clearly.  

Case one; one certificate, multiple URLs.  That looks dangerous to me.
No explanation requested.  

Case two; one URL, multiple certificates.  Is that really dangerous?
How? 

Can you handle both cases with one variable?  

Also, I've had a peek in ~/.claws-mail/certs and am a bit lost on port
number 465, Wikipedia says that it was obsoleted last century.
<https://en.wikipedia.org/wiki/SMTPS> Should I change references from
465 to 587 and see what breaks?  

-- 
testing
bP


From pf at pfortin.com  Thu Jul 28 16:32:05 2016
From: pf at pfortin.com (pf at pfortin.com)
Date: Thu, 28 Jul 2016 10:32:05 -0400
Subject: [Users] filtering: from matchcase limited to <user@domain.tld> only?
Message-ID: <20160728103205.04f708b3@pfortin.com>

Hi,

When filtering, only part of "From" field is checked?

  From: "Instructables" <no-reply at u1924168.wl.sendgrid.net>

These rules fail:

enabled rulename "Instructables" from matchcase "sendgrid.net" & from
    matchcase "instructables" move "#mh/Mailbox/Instructables" enabled
rulename "Instructables.re" from regexpcase "instructables.*sendgrid.net"
    move "#mh/Mailbox/Instructables"

[10:16:56] processing rule 'Instructables' [ from matchcase
    "sendgrid.net" & from matchcase "instructables" move
    "#mh/Mailbox/Instructables" ] 
[10:16:56] checking if message matches [ from matchcase "sendgrid.net" ]
[10:16:56] checking if message matches [ from matchcase "instructables" ]
> message does not match
[10:16:56] processing rule 'Instructables.re' [ from regexpcase
    "instructables.*sendgrid.net" move "#mh/Mailbox/Instructables"]
[10:16:56] checking if message matches [ from regexpcase
    "instructables.*sendgrid.net" ]
> message does not match

I had a different 2nd check in the first rule; but that quit working due
to change in messages -- so tried the above to no avail...

Pierre


From claws at thewildbeast.co.uk  Thu Jul 28 16:45:41 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Thu, 28 Jul 2016 15:45:41 +0100
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728103205.04f708b3@pfortin.com>
References: <20160728103205.04f708b3@pfortin.com>
Message-ID: <20160728154541.17ee4ba2@kujata>

On Thu, 28 Jul 2016 10:32:05 -0400
pf at pfortin.com wrote: 

> I had a different 2nd check in the first rule; but that quit
> working due to change in messages -- so tried the above to no
> avail...

Works for me:

[15:43:53] checking if message matches [ from matchcase "sendgrid.net" ]
[15:43:53] From: header value [ "Instructables" <no-reply at u1924168.wl.sendgrid.net> ] contains [ sendgrid.net ] (Case insensitive)
[15:43:53] checking if message matches [ from matchcase "instructables" ]
[15:43:53] From: header value [ "Instructables" <no-reply at u1924168.wl.sendgrid.net> ] contains [ instructables ] (Case insensitive)
> message matches
[15:43:53] applying action [ move "#mh/Mailbox/Instructables" ]

with regards

Paul


From pf at pfortin.com  Thu Jul 28 21:07:49 2016
From: pf at pfortin.com (Pierre Fortin)
Date: Thu, 28 Jul 2016 15:07:49 -0400
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728154541.17ee4ba2@kujata>
References: <20160728103205.04f708b3@pfortin.com>
 <20160728154541.17ee4ba2@kujata>
Message-ID: <20160728150749.43367766@pfortin.com>

On Thu, 28 Jul 2016 15:45:41 +0100 Paul wrote:

>On Thu, 28 Jul 2016 10:32:05 -0400
>pf at pfortin.com wrote: 
>
>> I had a different 2nd check in the first rule; but that quit
>> working due to change in messages -- so tried the above to no
>> avail...  
>
>Works for me:
>
>[15:43:53] checking if message matches [ from matchcase "sendgrid.net" ]
>[15:43:53] From: header value [ "Instructables"
><no-reply at u1924168.wl.sendgrid.net> ] contains [ sendgrid.net ] (Case
>insensitive) [15:43:53] checking if message matches [ from matchcase
>"instructables" ] [15:43:53] From: header value [ "Instructables"
><no-reply at u1924168.wl.sendgrid.net> ] contains [ instructables ] (Case
>insensitive)
>> message matches  
>[15:43:53] applying action [ move "#mh/Mailbox/Instructables" ]

Looks like filtering changed between 172 and 211...  At least, the log
output did...  

Seeing the discussions on IRC, I was waiting to checkout more current
version...  :)

Thanks!

>with regards
>
>Paul
>_______________________________________________
>Users mailing list
>Users at lists.claws-mail.org
>http://lists.claws-mail.org/cgi-bin/mailman/listinfo/users
>


From claws at thewildbeast.co.uk  Thu Jul 28 21:13:18 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Thu, 28 Jul 2016 20:13:18 +0100
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728103205.04f708b3@pfortin.com>
References: <20160728103205.04f708b3@pfortin.com>
Message-ID: <20160728201318.4e992a69@kujata>

On Thu, 28 Jul 2016 10:32:05 -0400
pf at pfortin.com wrote: 

> [10:16:56] processing rule

You said 'filtering' but that's processing.

with regards

Paul


From claws at thewildbeast.co.uk  Thu Jul 28 21:14:49 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Thu, 28 Jul 2016 20:14:49 +0100
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728150749.43367766@pfortin.com>
References: <20160728103205.04f708b3@pfortin.com>
 <20160728154541.17ee4ba2@kujata>
 <20160728150749.43367766@pfortin.com>
Message-ID: <20160728201449.516099a9@kujata>

On Thu, 28 Jul 2016 15:07:49 -0400
Pierre Fortin <pf at pfortin.com> wrote: 

> Looks like filtering changed between 172 and 211...  At least, the
> log output did...

No, nothing's changed. It's likely to be your error.

with regards

Paul


From pf at pfortin.com  Thu Jul 28 23:12:30 2016
From: pf at pfortin.com (pf at pfortin.com)
Date: Thu, 28 Jul 2016 17:12:30 -0400
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728201318.4e992a69@kujata>
References: <20160728103205.04f708b3@pfortin.com>
 <20160728201318.4e992a69@kujata>
Message-ID: <20160728171230.18e63b67@pfortin.com>

On Thu, 28 Jul 2016 20:13:18 +0100 Paul wrote:

>On Thu, 28 Jul 2016 10:32:05 -0400
>pf at pfortin.com wrote: 
>
>> [10:16:56] processing rule  
>
>You said 'filtering' but that's processing.

I beg to differ -- in this case "processing" is a verb; as in "processing
[filtering] rule".

Just tried it again; here's the start of the filtering log:
* filtering log enabled
[17:01:30] filtering message (manually)
           ^^^^^^^^^
            message file: /home/pfortin/Mail/inbox/19504
            Date: Thu, 28 Jul 2016 13:08:58 +0000
            From: no-reply at u1924168.wl.sendgrid.net
            To: pf at pfortin.com
            Subject: DIY Portable Mini Monitor
[17:01:30] processing rule 'SneakySPAMtest2' [ body_part regexpcase "<script>\\n<!--" & body_part regexpcase "-->\\n</script>" move "#mh/Mailbox/inbox/SneakySPAM" ]
[...]                ^ [filtering]
[17:01:30] processing rule 'Instructables' [ from matchcase "sendgrid.net" & from matchcase "instructables" move "#mh/Mailbox/Instructables" ]
[17:01:30] checking if message matches [ from matchcase "sendgrid.net" ]
[17:01:30] checking if message matches [ from matchcase "instructables" ]
> message does not match
[17:01:30] processing rule 'Instructables.re' [ from regexpcase "instructables.*sendgrid.net" move "#mh/Mailbox/Instructables" ]
[17:01:30] checking if message matches [ from regexpcase "instructables.*sendgrid.net" ]
> message does not match

I don't have processing rules in this CM instance; only filtering...

Also, to test the issue, I use Tools->Filter selected messages which is
what the log came from...

In my other CM instance, I had 2 pre-processing rules for testing. Since
they were useless, I checked both and clicked Delete. Only the last one
was deleted. To delete the other one, I had to unselect/select it first...

Also, when a message is put in Draft to be able to access Prefs,
unwrapped lines get wrapped when resuming editing...

Looks like I may need to open 3 bugs for tracking...  :)

HTH

>with regards
>
>Paul
>_______________________________________________
>Users mailing list
>Users at lists.claws-mail.org
>http://lists.claws-mail.org/cgi-bin/mailman/listinfo/users
>


From claws at thewildbeast.co.uk  Thu Jul 28 23:50:57 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Thu, 28 Jul 2016 22:50:57 +0100
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728171230.18e63b67@pfortin.com>
References: <20160728103205.04f708b3@pfortin.com>
 <20160728201318.4e992a69@kujata>
 <20160728171230.18e63b67@pfortin.com>
Message-ID: <20160728225057.31fb2d40@kujata>

On Thu, 28 Jul 2016 17:12:30 -0400
pf at pfortin.com wrote: 

> I beg to differ -- in this case "processing" is a verb; as in
> "processing [filtering] rule".

Yes, I was mistaken here.
 
> In my other CM instance, I had 2 pre-processing rules for testing.
> Since they were useless, I checked both and clicked Delete. Only
> the last one was deleted. To delete the other one, I had to
> unselect/select it first...

The checkbox is for enabling/disabling a rule, not selecting. It is
impossible to select more than one, only one is highlighted at any
one time.

> Also, when a message is put in Draft to be able to access Prefs,
> unwrapped lines get wrapped when resuming editing...

That will be because you have auto-wrapping turned on. (This
information is saved with the drafted message.) When you have this
option turned on, auto-wrapping is performed in the Compose window.

I still think the filtering problem will turn out to be user error.

with regards

Paul


From cae at eslrahc.com  Fri Jul 29 00:00:08 2016
From: cae at eslrahc.com (Charles A Edwards)
Date: Thu, 28 Jul 2016 18:00:08 -0400
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728171230.18e63b67@pfortin.com>
References: <20160728103205.04f708b3@pfortin.com>
 <20160728201318.4e992a69@kujata>
 <20160728171230.18e63b67@pfortin.com>
Message-ID: <20160728180008.70496c2a@SuperSize.eslrahc.com>

On Thu, 28 Jul 2016 17:12:30 -0400
pf at pfortin.com wrote:

> >On Thu, 28 Jul 2016 10:32:05 -0400
> >pf at pfortin.com wrote: 
> >  
> >> [10:16:56] processing rule    
> >
> >You said 'filtering' but that's processing.  
> 
> I beg to differ -- in this case "processing" is a verb; as in
> "processing [filtering] rule".
> 
> Just tried it again; here's the start of the filtering log:
> * filtering log enabled
> [17:01:30] filtering message (manually)
>            ^^^^^^^^^
>             message file: /home/pfortin/Mail/inbox/19504
>             Date: Thu, 28 Jul 2016 13:08:58 +0000
>             From: no-reply at u1924168.wl.sendgrid.net
>             To: pf at pfortin.com
>             Subject: DIY Portable Mini Monitor
> [17:01:30] processing rule 'SneakySPAMtest2' [ body_part regexpcase
> "<script>\\n<!--" & body_part regexpcase "-->\\n</script>" move
> "#mh/Mailbox/inbox/SneakySPAM" ] [...]                ^ [filtering]
> [17:01:30] processing rule 'Instructables' [ from matchcase
> "sendgrid.net" & from matchcase "instructables" move
> "#mh/Mailbox/Instructables" ] [17:01:30] checking if message matches
> [ from matchcase "sendgrid.net" ] [17:01:30] checking if message
> matches [ from matchcase "instructables" ]
> > message does not match  
> [17:01:30] processing rule 'Instructables.re' [ from regexpcase
> "instructables.*sendgrid.net" move "#mh/Mailbox/Instructables" ]
> [17:01:30] checking if message matches [ from regexpcase
> "instructables.*sendgrid.net" ]
> > message does not match  


Are you absolutely that your regexpcase is run "Case insensitive"?

If there is any possibility that it is not, try changing instructables
to Instructables in the filter and test it again.


    Charles

-- 
Everything you like is forbidden. 
		-- Axiom
----------------------
Mageia release 6 (Cauldron) for x86_64$
On SuperSize....http://www.eslrahc.com
Registered Linux user #182463
4.7.0-server-1.mga6 x86_64
----------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160728/3c80bf3a/attachment.sig>

From pf at pfortin.com  Fri Jul 29 01:52:13 2016
From: pf at pfortin.com (Pierre Fortin)
Date: Thu, 28 Jul 2016 19:52:13 -0400
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728180008.70496c2a@SuperSize.eslrahc.com>
References: <20160728103205.04f708b3@pfortin.com>
 <20160728201318.4e992a69@kujata>
 <20160728171230.18e63b67@pfortin.com>
 <20160728180008.70496c2a@SuperSize.eslrahc.com>
Message-ID: <20160728195213.757c1d83@pfortin.com>


Hi Charles (long time),

On Thu, 28 Jul 2016 18:00:08 -0400 Charles A Edwards wrote:

>Are you absolutely that your regexpcase is run "Case insensitive"?

[ ] Case sensitive
[X] Use regexp

Change Case sensitive -- still fails.

>If there is any possibility that it is not, try changing instructables
>to Instructables in the filter and test it again.

Still no joy...

Initial rules (contain "case" = insensitive):

enabled rulename "Instructables" from matchcase "sendgrid.net" & from matchcase "instructables" move "#mh/Mailbox/Instructables" 
enabled rulename "Instructables.re" from regexpcase "instructables.*sendgrid.net" move "#mh/Mailbox/Instructables"

Cap'ed -- should not matter with case insensitivity.

I have 117 rules and this is the first failure I haven't been able to
track down... 

Tried reversing the order of the matching in the first rule in case order
is important; nope.

Gotta be the most simple & innocuous problem -- usually the case for my
most difficult problems...  :/

Here's the input again (via emacs copy this time):
From: "Instructables" <no-reply at u1924168.wl.sendgrid.net>

Thanks,
Pierre


From cae at eslrahc.com  Fri Jul 29 02:30:10 2016
From: cae at eslrahc.com (Charles A Edwards)
Date: Thu, 28 Jul 2016 20:30:10 -0400
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728195213.757c1d83@pfortin.com>
References: <20160728103205.04f708b3@pfortin.com>
 <20160728201318.4e992a69@kujata>
 <20160728171230.18e63b67@pfortin.com>
 <20160728180008.70496c2a@SuperSize.eslrahc.com>
 <20160728195213.757c1d83@pfortin.com>
Message-ID: <20160728203010.005c1092@SuperSize.eslrahc.com>

On Thu, 28 Jul 2016 19:52:13 -0400
Pierre Fortin wrote:

> Hi Charles (long time),

It has been awhile but I'm still around kicking.

> 
> On Thu, 28 Jul 2016 18:00:08 -0400 Charles A Edwards wrote:
> 
> >Are you absolutely that your regexpcase is run "Case insensitive"?  
> 
> [ ] Case sensitive
> [X] Use regexp
> 
> Change Case sensitive -- still fails.
> 
> >If there is any possibility that it is not, try changing
> >instructables to Instructables in the filter and test it again.  
> 
> Still no joy...
> 
> Initial rules (contain "case" = insensitive):
> 
> enabled rulename "Instructables" from matchcase "sendgrid.net" & from
> matchcase "instructables" move "#mh/Mailbox/Instructables" enabled
> rulename "Instructables.re" from regexpcase
> "instructables.*sendgrid.net" move "#mh/Mailbox/Instructables"
> 
> Cap'ed -- should not matter with case insensitivity.
> 
> I have 117 rules and this is the first failure I haven't been able to
> track down... 
> 
> Tried reversing the order of the matching in the first rule in case
> order is important; nope.
> 
> Gotta be the most simple & innocuous problem -- usually the case for
> my most difficult problems...  :/

I can well understand that.
My latest was about a month ago trying to get a Radeon to work on
another linux system.
I must have sent an hour but I could not get it to use or load the ati
driver but kept loading nouveau.
It was driving me up the wall, then I finally realized I had put in the
wrong damn card.
It was another nvidia Not the radeon I had intended use.
DUH!!! (-:


> 
> Here's the input again (via emacs copy this time):
> From: "Instructables" <no-reply at u1924168.wl.sendgrid.net>
 
I'm no expert on regexp but I think you need to include the quotation
marks in the filter
Instead a simply Instructables it would be
"Instructables"
and it would appear in the filter as
"\"Instructables\""


    Charles
 
-- 
/* Halley */

	(Halley's comment.)
----------------------
Mageia release 6 (Cauldron) for x86_64$
On SuperSize....http://www.eslrahc.com
Registered Linux user #182463
4.7.0-server-1.mga6 x86_64
----------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160728/dece4cd4/attachment.sig>

From pf at pfortin.com  Fri Jul 29 06:42:48 2016
From: pf at pfortin.com (Pierre Fortin)
Date: Fri, 29 Jul 2016 00:42:48 -0400
Subject: [Users] filtering: from matchcase limited to <user@domain.tld>
 only?
In-Reply-To: <20160728203010.005c1092@SuperSize.eslrahc.com>
References: <20160728103205.04f708b3@pfortin.com>
 <20160728201318.4e992a69@kujata>
 <20160728171230.18e63b67@pfortin.com>
 <20160728180008.70496c2a@SuperSize.eslrahc.com>
 <20160728195213.757c1d83@pfortin.com>
 <20160728203010.005c1092@SuperSize.eslrahc.com>
Message-ID: <20160729004248.03c95263@pfortin.com>

On Thu, 28 Jul 2016 20:30:10 -0400 Charles A Edwards wrote:

>On Thu, 28 Jul 2016 19:52:13 -0400
>Pierre Fortin wrote:
>
>> Hi Charles (long time),  
>
>It has been awhile but I'm still around kicking.

Good to hear.  I'm still vertical, so that's good too...  :)

Interesting discovery (see below)...

>> Gotta be the most simple & innocuous problem -- usually the case for
>> my most difficult problems...  :/  
>
>I can well understand that.
>My latest was about a month ago trying to get a Radeon to work on
>another linux system.
>I must have sent an hour but I could not get it to use or load the ati
>driver but kept loading nouveau.
>It was driving me up the wall, then I finally realized I had put in the
>wrong damn card.
>It was another nvidia Not the radeon I had intended use.
>DUH!!! (-:

LOL! Had many flubs myself.  Circa 1990, I used to have this in my .sig:
  Until you've found AND fixed a problem, 
  what you discount will likely be the cause.

That was triggered when I finally got to the bottom of a problem on
equipment that had "worked" for 10 YEARS -- incomplete installation! :p

>> Here's the input again (via emacs copy this time):
>> From: "Instructables" <no-reply at u1924168.wl.sendgrid.net>  
> 
>I'm no expert on regexp but I think you need to include the quotation
>marks in the filter
>Instead a simply Instructables it would be
>"Instructables"
>and it would appear in the filter as
>"\"Instructables\""

That should only apply to wrappers (like bash) which strip certain
characters; but trying in case... [testing]   No change...  

I have other similar rules that [used to?] work; but haven't seen
messages to exercise them in a while...  

sendgrid.net is showing up from more often. They appear to be a mail
blaster service that seems intent on obfuscating filtering attempts.
This is my third rework of this filter trying to find a reliable rule.
Was using [b]ody_part filter previously...  

I also get emails from "Duke Energy" (power company) via sendgrid.net, so
moved a recent message to inbox, and created new filter. All I did was
directly edit the string (v. using the wizard) from "body_part" to "from"
and that rule now fails to match...  

INTERESTING....  I always run two instances of CM.
Running same test on my other instance and it _works_ there...

No more time to dig into this until tomorrow afternoon.

Maybe something in [hidden?] *rc setting(s)...?

Cheers,

>    Charles

Pierre


From noreply at thewildbeast.co.uk  Fri Jul 29 09:57:25 2016
From: noreply at thewildbeast.co.uk (noreply at thewildbeast.co.uk)
Date: Fri, 29 Jul 2016 07:57:25 +0000
Subject: [Users] [Bug 3431] MH folders not being created when IMAP account
 is added first to a new installation
In-Reply-To: <bug-3431-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
References: <bug-3431-595@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>
Message-ID: <bug-3431-595-cg2QVOEORF@http.www.thewildbeast.co.uk/claws-mail/bugzilla/>

http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3431

Paul <paul at claws-mail.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
           Severity|normal                      |enhancement

--- Comment #2 from Paul <paul at claws-mail.org> ---
It's entirely possible that the user would want to get his mail from the POP
server and have it stored on the IMAP server. The user can create an MH mailbox
if he/she wants one, so I'm 'downgrading' this to 'enhancement', as perhaps the
user should be prompted (via a dialogue) to create an MH mailbox if one does
not exist.

-- 
You are receiving this mail because:
You are the assignee for the bug.


From tech-info at gmx.de  Fri Jul 29 16:40:48 2016
From: tech-info at gmx.de (tech-info)
Date: Fri, 29 Jul 2016 16:40:48 +0200
Subject: [Users] How to remove e.g. 'sent' folder from Mailbox
Message-ID: <0M7ojs-1b7EKP2hkG-00vRbI@mail.gmx.com>

Hello,

i use Claws Mail 3.13.2 (Linux Mint 18) with a couple of
POP-Mailaccounts. Every single one has its own Mailbox (MH).
So i got 15 times the 'trash' , 'sent' , etc. folders.

Since a couple of hours I try to get rid of the unused 'sent' folders.
(I direct the sent mails into the 'inbox' folder.)
And I would like to delete a couple of 'outbox' folders.

But i can not figure out how it works. When i 'right-click' on the
folder the delete option is greyed out.
Even deleting the folder from the Filesystem oder messing with the
folderlist.xml (Is there any manual on this?) didn't help.

I would love to get a tipp how it works or where i could start
exploring the needed Infomation.

Greetings,

Gerd


From claws at thewildbeast.co.uk  Fri Jul 29 17:07:27 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Fri, 29 Jul 2016 16:07:27 +0100
Subject: [Users] How to remove e.g. 'sent' folder from Mailbox
In-Reply-To: <0M7ojs-1b7EKP2hkG-00vRbI@mail.gmx.com>
References: <0M7ojs-1b7EKP2hkG-00vRbI@mail.gmx.com>
Message-ID: <20160729160727.37a3ebb9@kujata>

On Fri, 29 Jul 2016 16:40:48 +0200
tech-info <tech-info at gmx.de> wrote: 

> i use Claws Mail 3.13.2 (Linux Mint 18) with a couple of
> POP-Mailaccounts. Every single one has its own Mailbox (MH).
> So i got 15 times the 'trash' , 'sent' , etc. folders.

You can't. Every MH mailbox comes with the standard folders.

What you could consider is making all your POP accounts share a
single MH mailbox. You can make sub-directories under inbox/, sent/,
etc for each account, and configure the accounts to use the correct
one. It works just fine, in my experience.

with regards

Paul


From silver.bullet at zoho.com  Fri Jul 29 17:48:34 2016
From: silver.bullet at zoho.com (Ralf Mardorf)
Date: Fri, 29 Jul 2016 17:48:34 +0200
Subject: [Users] How to remove e.g. 'sent' folder from Mailbox
In-Reply-To: <0M7ojs-1b7EKP2hkG-00vRbI@mail.gmx.com>
References: <0M7ojs-1b7EKP2hkG-00vRbI@mail.gmx.com>
Message-ID: <20160729174834.4ce24fdd@utnubu>

On Fri, 29 Jul 2016 16:40:48 +0200, tech-info wrote:
>i use Claws Mail 3.13.2 (Linux Mint 18) with a couple of
>POP-Mailaccounts. Every single one has its own Mailbox (MH).
>So i got 15 times the 'trash' , 'sent' , etc. folders.
>
>Since a couple of hours I try to get rid of the unused 'sent' folders.
>(I direct the sent mails into the 'inbox' folder.)
>And I would like to delete a couple of 'outbox' folders.
>
>But i can not figure out how it works. When i 'right-click' on the
>folder the delete option is greyed out.
>Even deleting the folder from the Filesystem oder messing with the
>folderlist.xml (Is there any manual on this?) didn't help.
>
>I would love to get a tipp how it works or where i could start
>exploring the needed Infomation.

To add a new POP account, you don't need to add a new mailbox by File >
Add Mailbox > MH..., you only need to add a new account by the
Configuration menu.

Take a look at
Configuration > Edit Accounts... > Some Account > Receive > Default Inbox
Configuration > Edit Accounts... > Some Account > Advanced
and edit it for all accounts, to select the same MH.

Care that no filter or anything else does use a different MH and
after moving the mails you want to keep, remove all the MHs you don't
need, by right-clicking on the mailbox and selecting
Remove mailbox... .

I'm using several POP accounts and only have got one MH and there never was a
MH created, when I added a new POP account.

Regards,
Ralf



From jerry at seibercom.net  Fri Jul 29 20:23:01 2016
From: jerry at seibercom.net (Jerry)
Date: Fri, 29 Jul 2016 14:23:01 -0400
Subject: [Users] Three questions regarding claws-mail
Message-ID: <20160729142301.0000523d@seibercom.net>

When comparing MS Outlook to Claws-Mail, I find three very, at least to
me, important things that appear to be missing from Claws-Mail.

1)	I cannot seem to find a way to export an entire mailbox
folder. I can export individual mailboxes in the folder, but not the
folder itself. That is a serious problem for me.

2)	A lot of my work is for a municipality. Out emails are
subject review by the public upon demand. While I can print out a
single email, I cannot print out several emails without having to okay
each one. A serious problem if I am trying to print out a hundred
emails. This is a SERIOUS problem.

3)	Very often I am asked to save these emails in PDF format for
distribution. In MS Outlook I simply choose the Acrobat Printer and
then where I want them saved. The emails are all assembled into one PDF
document. In Claws-Mail, I am asked for a new name for each email.
While that might be useful in some circumstances, it is not a viable
option when trying to print out a large number of emails. Again, as in
#2, a SERIOUS problem.

Does anyone know of a way around this?

-- 
Jerry


From ricardo at mones.org  Fri Jul 29 21:08:48 2016
From: ricardo at mones.org (Ricardo Mones)
Date: Fri, 29 Jul 2016 21:08:48 +0200
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160729142301.0000523d@seibercom.net>
References: <20160729142301.0000523d@seibercom.net>
Message-ID: <20160729210848.7ca2eddb@busgosu>

Hi Jerry,

On Fri, 29 Jul 2016 14:23:01 -0400
Jerry <jerry at seibercom.net> wrote:

> When comparing MS Outlook to Claws-Mail, I find three very, at least to
> me, important things that appear to be missing from Claws-Mail.
> 
> 1)	I cannot seem to find a way to export an entire mailbox
> folder. I can export individual mailboxes in the folder, but not the
> folder itself. That is a serious problem for me.

A workaround for this could be to put all folder structure below one
(like inbox) instead of directly from the toplevel mailbox.

> 2)	A lot of my work is for a municipality. Out emails are
> subject review by the public upon demand. While I can print out a
> single email, I cannot print out several emails without having to okay
> each one. A serious problem if I am trying to print out a hundred
> emails. This is a SERIOUS problem.
> 
> 3)	Very often I am asked to save these emails in PDF format for
> distribution. In MS Outlook I simply choose the Acrobat Printer and
> then where I want them saved. The emails are all assembled into one PDF
> document. In Claws-Mail, I am asked for a new name for each email.
> While that might be useful in some circumstances, it is not a viable
> option when trying to print out a large number of emails. Again, as in
> #2, a SERIOUS problem.
> 
> Does anyone know of a way around this?

These two are basically the same, which you (?) already reported some time
ago¹. A possible workaround could be an action to call some small script
capable of parsing mails and call printing sub-system with the result of
joining all of them.

Of course that script has to be written first :) but most of script
languages (perl or python for example) have libraries to deal with mail
messages and invoking external programs.

HTH,

¹ http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3335
-- 
  Ricardo Mones 
  ~
  You have the capacity to learn from mistakes. You'll learn a lot 
  today.                                           /usr/games/fortune

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160729/3f21df49/attachment.sig>

From jerry at seibercom.net  Fri Jul 29 21:30:11 2016
From: jerry at seibercom.net (Jerry)
Date: Fri, 29 Jul 2016 15:30:11 -0400
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160729210848.7ca2eddb@busgosu>
References: <20160729142301.0000523d@seibercom.net>
 <20160729210848.7ca2eddb@busgosu>
Message-ID: <20160729153011.000079cf@seibercom.net>

On Fri, 29 Jul 2016 21:08:48 +0200, Ricardo Mones stated:

>Hi Jerry,
>
>On Fri, 29 Jul 2016 14:23:01 -0400
>Jerry <jerry at seibercom.net> wrote:
>
>> When comparing MS Outlook to Claws-Mail, I find three very, at least
>> to me, important things that appear to be missing from Claws-Mail.
>> 
>> 1)	I cannot seem to find a way to export an entire mailbox
>> folder. I can export individual mailboxes in the folder, but not the
>> folder itself. That is a serious problem for me.  
>
>A workaround for this could be to put all folder structure below one
>(like inbox) instead of directly from the toplevel mailbox.

I suppose, but the larger, more important question is why that
restriction is there to begin with. It does not exist in MS Outlook.

>> 2)	A lot of my work is for a municipality. Out emails are
>> subject review by the public upon demand. While I can print out a
>> single email, I cannot print out several emails without having to
>> okay each one. A serious problem if I am trying to print out a
>> hundred emails. This is a SERIOUS problem.
>> 
>> 3)	Very often I am asked to save these emails in PDF format
>> for distribution. In MS Outlook I simply choose the Acrobat Printer
>> and then where I want them saved. The emails are all assembled into
>> one PDF document. In Claws-Mail, I am asked for a new name for each
>> email. While that might be useful in some circumstances, it is not a
>> viable option when trying to print out a large number of emails.
>> Again, as in #2, a SERIOUS problem.
>> 
>> Does anyone know of a way around this?  
>
>These two are basically the same, which you (?) already reported some
>time ago¹. A possible workaround could be an action to call some small
>script capable of parsing mails and call printing sub-system with the
>result of joining all of them.
>
>Of course that script has to be written first :) but most of script
>languages (perl or python for example) have libraries to deal with mail
>messages and invoking external programs.
>
>HTH,
>
>¹
>http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3335

I had forgotten that I had reported this deficiency awhile ago. I have
been using MS Outlook at work, so I did not notice the problem. Now
that I am working at home with claws-mail, the problem is manifesting
itself again. The only truly functional way to handle this is to use MS
Outlook for my municipal email account at home too. Sadly I have
neither the time, inclination nor probably the skill to start writing
scripts for what, in my opinion, should already be supported behavior in
claws-mail to begin with.

Thanks for your response.

-- 
Jerry


From slitt at troubleshooters.com  Sat Jul 30 01:04:40 2016
From: slitt at troubleshooters.com (Steve Litt)
Date: Fri, 29 Jul 2016 19:04:40 -0400
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160729142301.0000523d@seibercom.net>
References: <20160729142301.0000523d@seibercom.net>
Message-ID: <20160729190440.34267404@mydesk.domain.cxm>

On Fri, 29 Jul 2016 14:23:01 -0400, Jerry <jerry at seibercom.net> wrote:
> When comparing MS Outlook to Claws-Mail, I find three very, at least
> to me, important things that appear to be missing from Claws-Mail.
> 
> 1)	I cannot seem to find a way to export an entire mailbox
> folder. I can export individual mailboxes in the folder, but not the
> folder itself. That is a serious problem for me.
> 
> 2)	A lot of my work is for a municipality. Out emails are
> subject review by the public upon demand. While I can print out a
> single email, I cannot print out several emails without having to okay
> each one. A serious problem if I am trying to print out a hundred
> emails. This is a SERIOUS problem.
> 
> 3)	Very often I am asked to save these emails in PDF format for
> distribution. In MS Outlook I simply choose the Acrobat Printer and
> then where I want them saved. The emails are all assembled into one
> PDF document. In Claws-Mail, I am asked for a new name for each email.
> While that might be useful in some circumstances, it is not a viable
> option when trying to print out a large number of emails. Again, as in
> #2, a SERIOUS problem.
> 
> Does anyone know of a way around this?
> 
> -- 
> Jerry


Hi Jerry,

Judging not only by this email, but from others in this thread, you
want to use Claws at home and MS Outlook at work. One possibility might
be to have MS Outlook at work and Claws-Mail at home be nothing but
read-write access to an IMAP server. This way whatever's accessible in
one place is accessible in the other, and if someone wants printing of
one or a hundred emails, you can do it at work on the MS Outlook
system, while still having Claws at home.

My Claws-Mail is simply a front end to my desktop machine hosted
Dovecot IMAP server, so (via a firewall pinhole) I can hit it from
anywhere with anything. Now of course you're with the government, and
after the kerfluffel with Hillary Clinton's "personal email server",
I'd advise against running your own Dovecot like I do, because it
literally is a "personal email server." But wherever your emails come
from probably have an IMAP account that can store your messages.

SteveT

Steve Litt 
== Whose business shall never be mentioned on the Claws-Mail List ==




-- 
SteveT

Steve Litt 
July 2016 featured book: Troubleshooting Techniques
     of the Successful Technologist
http://www.troubleshooters.com/techniques


From pg.nikolic1 at gmail.com  Sat Jul 30 08:52:15 2016
From: pg.nikolic1 at gmail.com (pete nikolic)
Date: Sat, 30 Jul 2016 07:52:15 +0100
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160729153011.000079cf@seibercom.net>
References: <20160729142301.0000523d@seibercom.net>
 <20160729210848.7ca2eddb@busgosu>
 <20160729153011.000079cf@seibercom.net>
Message-ID: <20160730075215.037b08e4@ds9>

On Fri, 29 Jul 2016 15:30:11 -0400
Jerry <jerry at seibercom.net> wrote:

> On Fri, 29 Jul 2016 21:08:48 +0200, Ricardo Mones stated:
> 
> >Hi Jerry,
> >
> >On Fri, 29 Jul 2016 14:23:01 -0400
> >Jerry <jerry at seibercom.net> wrote:
> >  
> >> When comparing MS Outlook to Claws-Mail, I find three very, at least
> >> to me, important things that appear to be missing from Claws-Mail.
> >> 
> >> 1)	I cannot seem to find a way to export an entire mailbox
> >> folder. I can export individual mailboxes in the folder, but not the
> >> folder itself. That is a serious problem for me.    
> >
> >A workaround for this could be to put all folder structure below one
> >(like inbox) instead of directly from the toplevel mailbox.  
> 
> I suppose, but the larger, more important question is why that
> restriction is there to begin with. It does not exist in MS Outlook.
> 
> >> 2)	A lot of my work is for a municipality. Out emails are
> >> subject review by the public upon demand. While I can print out a
> >> single email, I cannot print out several emails without having to
> >> okay each one. A serious problem if I am trying to print out a
> >> hundred emails. This is a SERIOUS problem.
> >> 
> >> 3)	Very often I am asked to save these emails in PDF format
> >> for distribution. In MS Outlook I simply choose the Acrobat Printer
> >> and then where I want them saved. The emails are all assembled into
> >> one PDF document. In Claws-Mail, I am asked for a new name for each
> >> email. While that might be useful in some circumstances, it is not a
> >> viable option when trying to print out a large number of emails.
> >> Again, as in #2, a SERIOUS problem.
> >> 
> >> Does anyone know of a way around this?    
> >
> >These two are basically the same, which you (?) already reported some
> >time ago¹. A possible workaround could be an action to call some small
> >script capable of parsing mails and call printing sub-system with the
> >result of joining all of them.
> >
> >Of course that script has to be written first :) but most of script
> >languages (perl or python for example) have libraries to deal with mail
> >messages and invoking external programs.
> >
> >HTH,
> >
> >¹
> >http://www.thewildbeast.co.uk/claws-mail/bugzilla/show_bug.cgi?id=3335  
> 
> I had forgotten that I had reported this deficiency awhile ago. I have
> been using MS Outlook at work, so I did not notice the problem. Now
> that I am working at home with claws-mail, the problem is manifesting
> itself again. The only truly functional way to handle this is to use MS
> Outlook for my municipal email account at home too. Sadly I have
> neither the time, inclination nor probably the skill to start writing
> scripts for what, in my opinion, should already be supported behavior in
> claws-mail to begin with.
> 
> Thanks for your response.
> 

Some of us on the other hand find the way claws works to be bang on the money and
are extremely glad it is not like the Virus Door Outlook  opinions vary  .


Pete .


From jerry at seibercom.net  Sat Jul 30 12:18:08 2016
From: jerry at seibercom.net (Jerry)
Date: Sat, 30 Jul 2016 06:18:08 -0400
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160730075215.037b08e4@ds9>
References: <20160729142301.0000523d@seibercom.net>
 <20160729210848.7ca2eddb@busgosu>
 <20160729153011.000079cf@seibercom.net>
 <20160730075215.037b08e4@ds9>
Message-ID: <20160730061808.000049ce@seibercom.net>

On Sat, 30 Jul 2016 07:52:15 +0100, pete nikolic stated:

[Truncated]

>Some of us on the other hand find the way claws works to be bang on
>the money and are extremely glad it is not like the Virus Door
>Outlook  opinions vary  .

I totally respect your opinion. Obviously, different strokes for
different folks. While I find claws-mail great as a personal MUA, it is
sadly lacking in its usability in a "business or governmental"
environment, again in my humble opinion, primarily in its obtuse
printing facilities.

I have installed MS Outlook on my home PC solely for the purpose of
handling my municipal email account. Thanks to the fact that I can
export and import and entire mail folder, the whole thing was a breeze.

Thank you for your feedback.

-- 
Jerry


From ricardo at mones.org  Sat Jul 30 12:49:09 2016
From: ricardo at mones.org (Ricardo Mones)
Date: Sat, 30 Jul 2016 12:49:09 +0200
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160730061808.000049ce@seibercom.net>
References: <20160729142301.0000523d@seibercom.net>
 <20160729210848.7ca2eddb@busgosu>
 <20160729153011.000079cf@seibercom.net>
 <20160730075215.037b08e4@ds9>
 <20160730061808.000049ce@seibercom.net>
Message-ID: <20160730124909.22e060ce@busgosu>

On Sat, 30 Jul 2016 06:18:08 -0400
Jerry <jerry at seibercom.net> wrote:

> On Sat, 30 Jul 2016 07:52:15 +0100, pete nikolic stated:
> 
> [Truncated]
> 
> >Some of us on the other hand find the way claws works to be bang on
> >the money and are extremely glad it is not like the Virus Door
> >Outlook  opinions vary  .  
> 
> I totally respect your opinion. Obviously, different strokes for
> different folks. While I find claws-mail great as a personal MUA, it is
> sadly lacking in its usability in a "business or governmental"
> environment, again in my humble opinion, primarily in its obtuse
> printing facilities

Not all business or governments are equal, you're forgetting what you've
just said in the previous sentence ;-)

I've been using it at work for years, but, of course, my "business
enviroment" is encouraging employees not to print unless required, and I
personally do not print anything unless there's really no alternative,
nor need to generate a massive amount of PDFs (already have the mails
which waste less disk space).

That current printing capabilities are not suitable to your very
particular job doesn't make them "obtuse" or "lacking usability".

regards,
-- 
  Ricardo Mones 
  ~
  Physics is like sex: sure, it may give some practical results, but 
  that's not why we do it.                            Richard Feynman

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160730/1999823f/attachment.sig>

From claws at thewildbeast.co.uk  Sat Jul 30 14:20:58 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Sat, 30 Jul 2016 13:20:58 +0100
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160729142301.0000523d@seibercom.net>
References: <20160729142301.0000523d@seibercom.net>
Message-ID: <20160730132058.54eecb32@kujata>

On Fri, 29 Jul 2016 14:23:01 -0400
Jerry <jerry at seibercom.net> wrote: 

> 1)	I cannot seem to find a way to export an entire mailbox
> folder. I can export individual mailboxes in the folder, but not the
> folder itself. That is a serious problem for me.

They're already sitting on your filesystem as files in directories.
Why do you need to export them when you can just copy (and so on) the
files and directories.

with regards

Paul


From renaud at olgiati-in-paraguay.org  Sat Jul 30 14:29:24 2016
From: renaud at olgiati-in-paraguay.org (Renaud OLGIATI (Ron))
Date: Sat, 30 Jul 2016 08:29:24 -0400
Subject: [Users] Is this a bug ?
Message-ID: <20160730082924.73667c34@ron.cerrocora.org>

When I click inside the Message window, the focus is changed to that window _unless_ I have clicked on a web link in the message, in which case the focus remanins wherever it was.

Bug ?
 
Cheers,
 
Ron.
-- 
                                   花 は 桜ぎ
                                   人 は 武士
                                    
                   -- http://www.olgiati-in-paraguay.org --
 


From claws at thewildbeast.co.uk  Sat Jul 30 14:37:35 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Sat, 30 Jul 2016 13:37:35 +0100
Subject: [Users] Is this a bug ?
In-Reply-To: <20160730082924.73667c34@ron.cerrocora.org>
References: <20160730082924.73667c34@ron.cerrocora.org>
Message-ID: <20160730133735.2ecf90ba@kujata>

On Sat, 30 Jul 2016 08:29:24 -0400
Renaud (Ron) OLGIATI <renaud at olgiati-in-paraguay.org> wrote: 

> When I click inside the Message window, the focus is changed to
> that window _unless_ I have clicked on a web link in the message,
> in which case the focus remanins wherever it was.
> 
> Bug ?

No. Your version, 3.8.1, is over 4 years old, and 14 releases ago, so
I recommend upgrading before reporting any more potential bugs.

with regards

Paul


From jerry at seibercom.net  Sat Jul 30 14:57:27 2016
From: jerry at seibercom.net (Jerry)
Date: Sat, 30 Jul 2016 08:57:27 -0400
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160730132058.54eecb32@kujata>
References: <20160729142301.0000523d@seibercom.net>
 <20160730132058.54eecb32@kujata>
Message-ID: <20160730085727.00001cba@seibercom.net>

On Sat, 30 Jul 2016 13:20:58 +0100, Paul stated:

>They're already sitting on your filesystem as files in directories.
>Why do you need to export them when you can just copy (and so on) the
>files and directories.

Primarily, ease of use. In MS Outlook, and other MUAs as I have
discovered, I can simply click on the main folder and choose to export
it. MS Outlook, and perhaps others, even offer the ability to choose
all or a subset of the sub-folders to export. I am not sure if
claws-mail really needs that fine grain of an approach, although it
would be nice.

What comes as a surprise to me is that claws-mail offers the ability,
from the file menu, to export individual folders, but not the main
folder and its subdirectories. Personally, I do not see the rational
behind that decision.

-- 
Jerry


From claws at thewildbeast.co.uk  Sat Jul 30 15:21:17 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Sat, 30 Jul 2016 14:21:17 +0100
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160730085727.00001cba@seibercom.net>
References: <20160729142301.0000523d@seibercom.net>
 <20160730132058.54eecb32@kujata>
 <20160730085727.00001cba@seibercom.net>
Message-ID: <20160730142117.3df6b69a@kujata>

On Sat, 30 Jul 2016 08:57:27 -0400
Jerry <jerry at seibercom.net> wrote: 

> What comes as a surprise to me is that claws-mail offers the
> ability, from the file menu, to export individual folders, but not
> the main folder and its subdirectories. Personally, I do not see
> the rational behind that decision.

That's because it's an export to MBOX, and an MBOX file cannot have
folders. Probably some of those other need to export because they
use a proprietary storage format. What format are you talking about,
anyway? 

with regards

Paul


From renaud at olgiati-in-paraguay.org  Sat Jul 30 15:41:28 2016
From: renaud at olgiati-in-paraguay.org (Renaud OLGIATI (Ron))
Date: Sat, 30 Jul 2016 09:41:28 -0400
Subject: [Users] Is this a bug ?
In-Reply-To: <20160730133735.2ecf90ba@kujata>
References: <20160730082924.73667c34@ron.cerrocora.org>
 <20160730133735.2ecf90ba@kujata>
Message-ID: <20160730094128.287be138@ron.cerrocora.org>

On Sat, 30 Jul 2016 13:37:35 +0100
Paul <claws at thewildbeast.co.uk> wrote:

> > When I click inside the Message window, the focus is changed to
> > that window _unless_ I have clicked on a web link in the message,
> > in which case the focus remanins wherever it was.
> > Bug ?  
 
> No. Your version, 3.8.1, is over 4 years old, and 14 releases ago, so
> I recommend upgrading before reporting any more potential bugs.

I use the most recent version on offer for my Debian box  ;-3(
 
Cheers,
 
Ron.
-- 
                         Just because you're paranoid
                     doesn't mean they AREN'T after you.
                                    
                   -- http://www.olgiati-in-paraguay.org --
 


From myetto1 at nycap.rr.com  Sat Jul 30 15:46:32 2016
From: myetto1 at nycap.rr.com (Michael A. Yetto)
Date: Sat, 30 Jul 2016 09:46:32 -0400
Subject: [Users] Three questions regarding claws-mail
In-Reply-To: <20160730085727.00001cba@seibercom.net>
References: <20160729142301.0000523d@seibercom.net>
 <20160730132058.54eecb32@kujata>
 <20160730085727.00001cba@seibercom.net>
Message-ID: <20160730094632.43ba0b12@braetac.lighthouse.yetnet>

On Sat, 30 Jul 2016 08:57:27 -0400
Jerry <jerry at seibercom.net> wrote:

>On Sat, 30 Jul 2016 13:20:58 +0100, Paul stated:
>
>>They're already sitting on your filesystem as files in directories.
>>Why do you need to export them when you can just copy (and so on) the
>>files and directories.  
>
>Primarily, ease of use. In MS Outlook, and other MUAs as I have
>discovered, I can simply click on the main folder and choose to export
>it. MS Outlook, and perhaps others, even offer the ability to choose
>all or a subset of the sub-folders to export. I am not sure if
>claws-mail really needs that fine grain of an approach, although it
>would be nice.
>
>What comes as a surprise to me is that claws-mail offers the ability,
>from the file menu, to export individual folders, but not the main
>folder and its subdirectories. Personally, I do not see the rational
>behind that decision.
>

From the viewpoint of myself and others in this thread it isn't that
you can export the messages from Outlook and not from Claws. It is that
you must export them from Outlook, but there is no need to do so from
within Claws. 

The messages are already in the file system and can be copied, moved,
printed, or converted to PDFs even when Claws is not running.

There is no step missing when using Claws, there is an extra step when
using Outlook.

Mike Yetto
-- 
"Science knows no country, because knowledge belongs to humanity, and
is the torch which illuminates the world. Science is the highest
personification of the nation because that nation will remain the first
which carries the furthest the works of thought and intelligence."
 - Louis Pasteur
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160730/ce79984d/attachment.sig>

From claws at thewildbeast.co.uk  Sat Jul 30 15:50:44 2016
From: claws at thewildbeast.co.uk (Paul)
Date: Sat, 30 Jul 2016 14:50:44 +0100
Subject: [Users] Is this a bug ?
In-Reply-To: <20160730094128.287be138@ron.cerrocora.org>
References: <20160730082924.73667c34@ron.cerrocora.org>
 <20160730133735.2ecf90ba@kujata>
 <20160730094128.287be138@ron.cerrocora.org>
Message-ID: <20160730145044.44e21e08@kujata>

On Sat, 30 Jul 2016 09:41:28 -0400
Renaud (Ron) OLGIATI <renaud at olgiati-in-paraguay.org> wrote: 

> I use the most recent version on offer for my Debian box  ;-3(

Jessie, the latest debian stable release has 3.11.1, and
Jessie-backports has 3.13.2. Looks like you need to upgrade debian.

with regards

Paul


From nvx2004 at hotmail.com  Sun Jul 31 07:57:38 2016
From: nvx2004 at hotmail.com (nvx)
Date: Sun, 31 Jul 2016 07:57:38 +0200
Subject: [Users] Temporarily show otherwise hidden menu bar when Alt is
	pressed
Message-ID: <BLU437-SMTP47CBE894A748C115A40560A9030@phx.gbl>

Would it please be possible to make the hidden menu bar
(mainwin_menubar=0) temporarily appear when one presses the left Alt
key? To understand exactly what I mean please test this feature e.g. in
Firefox (View > Toolbars > uncheck Menu Bar, then press the left Alt
key).

Most of the time (at least for me) the menu bar only wastes
screen space, however, making it visible when necessary via F12 is a bit
cumbersome (not to mention the fact that sometimes I need to think hard
which key it actually is to display the menu bar -- several times I even
had to close CM and edit clawsrc to get it back ;) ).

Thank you.

nvx


From silver.bullet at zoho.com  Sun Jul 31 11:02:06 2016
From: silver.bullet at zoho.com (Ralf Mardorf)
Date: Sun, 31 Jul 2016 11:02:06 +0200
Subject: [Users] Temporarily show otherwise hidden menu bar when Alt is
 pressed
In-Reply-To: <BLU437-SMTP47CBE894A748C115A40560A9030@phx.gbl>
References: <BLU437-SMTP47CBE894A748C115A40560A9030@phx.gbl>
Message-ID: <20160731110206.3349c71a@utnubu>

On Sun, 31 Jul 2016 07:57:38 +0200, nvx wrote:
>(View > Toolbars > uncheck Menu Bar, then press the left Alt
>key)

Using the left Alt key to trigger an action by default is absolutely
bad. I don't want that something happens, as soon as I push Alt, when I
actually want to press Alt + another key, even not if it should be
possible to press the other key and to get the desired action.

If you dislike the default shortcuts, then why don't you edit them for
your install?

Regards,
Ralf

-- 
Death of ROXTerm
https://sourceforge.net/p/roxterm/discussion/422638/thread/60da6975/



From nvx2004 at hotmail.com  Sun Jul 31 11:59:31 2016
From: nvx2004 at hotmail.com (nvx)
Date: Sun, 31 Jul 2016 11:59:31 +0200
Subject: [Users] Temporarily show otherwise hidden menu bar when Alt is
 pressed
In-Reply-To: <20160731110206.3349c71a@utnubu>
References: <BLU437-SMTP47CBE894A748C115A40560A9030@phx.gbl>
 <20160731110206.3349c71a@utnubu>
Message-ID: <BLU436-SMTP60517647FE1A91492409E0A9030@phx.gbl>

2016/07/31 11:02, Ralf Mardorf <silver.bullet at zoho.com>:

> On Sun, 31 Jul 2016 07:57:38 +0200, nvx wrote:
> >(View > Toolbars > uncheck Menu Bar, then press the left Alt
> >key)  
> 
> Using the left Alt key to trigger an action by default is absolutely
> bad. I don't want that something happens, as soon as I push Alt, when
> I actually want to press Alt + another key, even not if it should be
> possible to press the other key and to get the desired action.

Fair enough; I understand that tastes differ. What I was pointing out
was that it probably is not such a bad idea if various other
applications have adopted this practice.

> If you dislike the default shortcuts, then why don't you edit them for
> your install?

Mapping the show/hide menu bar to just <Alt> in menurc
((gtk_accel_path "<Actions>/Menu/View/ShowHide/MenuBar" "<Alt>")) does
not work. When CM is opened and closed again this line automatically
changes to (gtk_accel_path "<Actions>/Menu/View/ShowHide/MenuBar" "").

Of course, I could map the respective action to some other key but
then what would be the difference between pressing F12 or this other
key? The beauty of LAlt, in my opinion, is in the fact that this key is
by default used to access items in the main menu (LAlt + F --> File menu
etc.) so using it to temporarily show the otherwise hidden menu bar is
sort of logical.

nvx


From jdebert at garlic.com  Sun Jul 31 21:45:52 2016
From: jdebert at garlic.com (jdebert)
Date: Sun, 31 Jul 2016 12:45:52 -0700
Subject: [Users] Is Claws-mail supposed to automatically connect to imaps
 servers when not configured to?
Message-ID: <20160731124552.673b4557@kendramatic>

Have Claws-mail 3.12.0, (opensuse build 3.12.0-7.1.x64). Using 3.10, I
added gmail imaps accounts and set up claws-mail to never connect to
them. On upgrade to 3.11, no connections were made to gmail serves
unless I manually initiated it. After upgrading, it never happened until
the first manual connection to one gmail imaps server. Now, claws-mail
connects to all the gmail servers and stays connected despite
cancelling the connections when the tls cert complaint box pops up. The
setup has not changed, the option to never connect to imap servers is
still set. I unset and set the option to never conenct to imap servers
and it still happens. Is this supposed to happen? Or am I overlooking
something?

tia...

jd



From c.buhtz at posteo.jp  Sun Jul 31 22:02:31 2016
From: c.buhtz at posteo.jp (c.buhtz at posteo.jp)
Date: Sun, 31 Jul 2016 22:02:31 +0200
Subject: [Users] sometimes claws forget the read-status of messages
Message-ID: <3s2YKT181Dz105h@submission01.posteo.de>

I am using Claws 3.13.12 on a Siduction Linux (Debian unstable) with
POP3/SMTP accounts.

Sometimes (but not exact reproducable) it forget the read status of
messages.
e.g. when I start claws INBOX is shown me with 2 unread meassages in
the left folder tree. But when I click on INBOX to show the messages in
it some of the older messages in it (sometimes all) turn to unread.

This problem comes from time to time but not so often. I am not able to
reproduce it for sure. That is why I am not sure what causes that
problem.

Is there a way to "reset" everything claws knows about the (un)read
status of its local stored messages? Is there a central file where this
info is stored and I can delete it?

For the background info:
I use the same Claws "instance" on two machines! This means I sync the
~/.claws-box and ~/.claws-mail folders between two machines. The last
years I used the Ubuntu Trusty claws version (quite old) for that.
I had the same problems there.
I don't use them as the same time! I switch between a desktop pc and a
laptop. When switching I start a sync process (with Unison) by myself.
This work really well. But only the thing with unread messages.


From brad at fineby.me.uk  Sun Jul 31 22:36:09 2016
From: brad at fineby.me.uk (Brad Rogers)
Date: Sun, 31 Jul 2016 21:36:09 +0100
Subject: [Users] sometimes claws forget the read-status of messages
In-Reply-To: <3s2YKT181Dz105h@submission01.posteo.de>
References: <3s2YKT181Dz105h@submission01.posteo.de>
Message-ID: <20160731213609.7380b202@abydos.stargate.org.uk>

On Sun, 31 Jul 2016 22:02:31 +0200
<c.buhtz at posteo.jp> wrote:

Hello c.buhtz at posteo.jp,

>I use the same Claws "instance" on two machines! This means I sync the
>~/.claws-box and ~/.claws-mail folders between two machines. The last

With POP/SMTP accounts, trying to sync status might be the root of your
problems.  IMAP is far better for syncing mail status on different
machines.  It's designed with that in mind - POP/SMTP isn't.

-- 
 Regards  _
         / )           "The blindingly obvious is
        / _)rad        never immediately apparent"
People stare like they've seen a ghost
Titanic (My Over) Reaction - 999
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.claws-mail.org/pipermail/users/attachments/20160731/b29c326c/attachment.sig>

From andrej at kacian.sk  Sun Jul 31 23:42:24 2016
From: andrej at kacian.sk (Andrej Kacian)
Date: Sun, 31 Jul 2016 23:42:24 +0200
Subject: [Users] sometimes claws forget the read-status of messages
In-Reply-To: <3s2YKT181Dz105h@submission01.posteo.de>
References: <3s2YKT181Dz105h@submission01.posteo.de>
Message-ID: <20160731234224.7887ebe7@penny>

On Sun, 31 Jul 2016 22:02:31 +0200
<c.buhtz at posteo.jp> wrote:

> I use the same Claws "instance" on two machines! This means I sync the
> ~/.claws-box and ~/.claws-mail folders between two machines. The last
> years I used the Ubuntu Trusty claws version (quite old) for that.
> I had the same problems there.

I'm assuming ~/.claws-box is where your mail is stored locally. Are you
also synchronizing dot-files withnin that folder? Message metadata
(flags, color labels, stuff like that) is stored in .claws_cache
and .claws_mark files in each MH folder. That's where also read/unread
status gets saved.

Regards,
-- 
Andrej